Green cutting blades are mainly used for cutting alloy steel, stainless steel and other metal parts. \x0d\ Green cutting plate, that is, resin cutting plate, is made of resin as binder, glass fiber mesh as bones and muscles, combined with various materials, and has particularly remarkable cutting performance on difficult-to-process materials such as alloy steel and stainless steel. The wet and dry cutting method makes the cutting accuracy more stable. At the same time, the choice of cutting material and hardness can greatly improve the cutting efficiency and save the production cost. \x0d\ Precautions for storage and use of resin cutting pieces: \x0d\ 1. The cutting parts must be handled carefully to prevent collision and breakage! \x0d\2。 Cutting pieces should be moisture-proof, anti-freezing and anti-deformation when stored. The cutting pieces should be laid flat on the wooden support plate or wooden frame, and the stacking height should generally not exceed 1.5m! \x0d\3。 The storage time of resin chips is one year. After that, check the rotation again, and use the resin cutting sheet only after it is confirmed to be qualified! \x0d\4。 When the cutting blade is installed on the angle grinder, the flange disk surface in contact with the cutting blade should be clean and flat, and the cutting blade should have moderate elasticity. Only special wrenches are allowed to be used for reinforcement, and auxiliary fixtures (such as extended wrenches) are not allowed to be used to prevent people from hurting the grinding tools! \x0d\5。 The working speed of the cutting blade cannot exceed the working linear speed specified in the trademark of the cutting blade. When using pneumatic grinder, it is necessary to prevent unstable air pressure from causing the cutting blade to exceed the maximum speed! \x0d\6。 When using the cutting blade, feed it slowly. If the force is too strong, it is easy to stop, get stuck and break the cutting blade. If it gets stuck, please lift the cutting blade immediately to avoid burning or breaking the cutting blade! \x0d\7。 Only one cutting piece is allowed to be installed and used. It is forbidden to install two or more pieces at the same time! \x0d\8。 The resin cutting blade is only allowed to cut, not to grind! \x0d\9。 The equipment used for cutting blades should comply with the safety regulations of grinding machinery specified in GB4674! \x0d\ 10, users should abide by GB2494 abrasive safety rules when using cutting parts!