Current location - Trademark Inquiry Complete Network - Trademark inquiry - Marking machine of pneumatic marking machine
Marking machine of pneumatic marking machine

Product name: high-end type of planar pneumatic marking machine

Working principle: by inputting the contents of characters and graphics to be printed in Chinese, English, numbers, etc. into the computer, the computer marking software converts the contents into digital control signals and transmits them to the controller, which drives the printing needle to move along the set trajectory in the X-Y two-dimensional plane, and at the same time, the printing needle makes high-frequency micro-impact movement under the action of compressed air, so as to print a dense dot matrix on the surface of the workpiece.

product features:

● USB2. high-speed data interface is the first in China, which makes data transmission faster and more stable;

● linear bearing structure with double columns is adopted, with no lateral clearance, which makes the positioning more accurate and free;

● Imported linear guide rail, stepping motor and solenoid valve are wear-resistant and have longer service life;

● Unique appearance design, comparable to similar foreign machines;

● The circuit design conforms to the international EMC test standard, and the system runs more stably and the marking accuracy is higher;

● reserved PLC interface, controlled by upper computer, more suitable for modern factory automatic printing system;

● I/O interface is reserved, and automatic clamping device can be installed according to customers' needs to improve work efficiency;

● Perfect drawing editing, needle alignment and data checking functions;

● completely meet the requirements of IS91-92 quality system certification for product identifiability and traceability.

typical application: batch number, date, trademark, product model and VIN number on all kinds of industrial parts, automobile parts, motorcycle parts and metal signs

product parameters: printing range 8* 14mm (optional) Maximum printing hardness HRC62 Print head lifting height ~3mm Compressed air pressure .3~.7MPa Repetitive printing accuracy .2mm Voltage requirements AC176~264V Printing minimum characters 1mm Machine power 3W Printing speed 1~3 characters/second Environmental temperature -1℃~5℃ System reset times 1 times Continuous working time > 48-hour inspection