1, spindle farming method
This is a common walking mode of rotary cultivators, which is suitable for most plots. The rotary cultivator enters from one side of the plot, and then gradually cultivates to the center, forming a series of gullies. After completing a circle of farming, the rotary cultivator turns back to the starting position, and then repeats the process. The advantage of this method is that the farming efficiency is high and the plot can be completely covered.
2. Intercropping method
This kind of walking mode is suitable for the situation that the plot is large and needs to be cultivated many times. When farming, the rotary tiller enters from one side of the plot, and then gradually cultivates to the center, forming a series of gullies. After the rotary cultivator completes a circle of cultivation, it cultivates the next circle in the opposite direction, and so on. The advantage of this method is that it can fully cover the plot and avoid missing cultivation.
Matters needing attention of rotary cultivator:
1. Before operation, check whether the rotary tiller bolts are tightened, the gear oil level, the wear of universal joint and cutter shaft, the sealing of oil seal and the defect of cutter teeth, and timely refuel, lubricate, repair and replace them to keep the technical condition intact.
2. When combining power output shafts, firstly combine the power output shafts smoothly, and when the rotation speed of the cutter shaft reaches normal, while advancing, gradually bury the blades in the soil to reach the required farming depth. It is forbidden for the blade to touch the ground first and then engage the PTO shaft or drop the cultivated land sharply to avoid damaging the machine parts.
3, when the machine is running, it is forbidden to close to the rotating parts. Don't let people run after you during rotary tillage to avoid danger. When turning and reversing, you must lift the rotary tiller. When lifting, it is not necessary to cut off the power supply, but it is necessary to reduce the throttle and reduce the speed of the universal joint shaft. The lifting height of rotary cultivator should keep the inclination of universal joint shaft not more than 30. No one is allowed to stand, sit or place heavy objects behind or on the rotary cultivator.