The trademark on the Lock Cup has been removed, but the remaining glue is still very sticky. How can I remove it?

Both gasoline and toluene can dilute the glue

But are you making that thing to hold some food? If so, please soak it in water for two days before using it. Toothpaste brush.

Note: It is best not to store drinks, pastes, and foods with high salt content in plastic products for a long time. It is best to store dry food or daily miscellaneous items during use. How to remove the adhesive residue after tearing off the trademark? Before tearing it off, you can use a hair dryer to blow it with hot air, and it can be peeled off without leaving any trace. If it was removed without a hair dryer, the remaining material can be cleaned with alcohol. Hope this helps. How to remove the remaining glue after tearing off various labels? Use a hot hair dryer to clean and save trouble, but it consumes power, especially when there are many labels. However, it is easy to soften and damage the plastic surface. ?

2. It is not recommended to use any grease or colored liquid, as it can easily contaminate the body of the product. Such as wind oil essence, skin cream, various edible oils, and industrial oils. . . ?

3. Nail polish remover is used for final cleaning when there is less residual glue. It is convenient and quick-drying, and the effect is very good. However, do not use it directly on large areas of residual glue. It is easy to melt the glue surface and eventually become out of control. ?

4. After tearing off the label, use tape, tape or the tape itself to quickly adhere the residual colloid. The effect is very good and does not consume electricity, but it consumes a little tape and takes a long time. This method can be used for two purposes. You can operate it while watching TV. It is simple and exercises the forearm muscles. It is recommended. Best used with hair dryer.

Answer from Tonghui trademark self-adhesive sticker printing company,

Please accept it if you are satisfied, thank you. I would like to ask how to remove the remaining glue from the decorations on the clothes after they have fallen off.

Just rub it with gasoline and it will come off! How to remove the AB glue remaining on the tiles when using AB glue to make seams?

AB glue is an epoxy glue. There is nothing to dissolve or soften it after solidification, so the floor tiles are stained with AB. Glue can only be removed with a spatula. How to remove label residue from the Lock Cup

Use a cotton ball dipped in alcohol to wipe it. How to remove the trademark on the hood and stove

I don’t know what kind of trademark it is. Generally, the trademarks of military aircraft stoves are printed in several ways. Laser marking, ink printing, adhesive tape.

1. If it is laser marking, there will be unevenness on the stainless steel surface or glass surface. This method cannot remove it and can be covered with tape.

2. If it is printed with ink, it is usually printed on the surface of stainless steel and can be wiped off.

3. It is easier to apply adhesive tape. You can blow it with a hair dryer and then peel it off. Remove it, or soak it with water and tear it off.

Products without trademarks cannot be sold or provided with after-sales service, so please consider the consequences carefully before taking action. What kind of medicine can be used to remove the remaining big tree roots in the ground?

It seems that there is no good medicine. Our local rural area hires a hook machine to clean it, and then fills the land for planting. I hope it will be helpful to you. . How to remove tea stains from Lock cups.

Edible alkali

Put a small amount into a cup, add boiling water, seal the cup and simmer for a few minutes, the tea stain will be removed

If the tea stain is , the effect is more obvious. How to remove the release agent remaining on the concrete surface?

The remaining release agent on the concrete surface can be removed by grinding, but if the area is extremely large, the thickness of the protective layer must be considered during the design stage.