1, soak in hot water for a while, and you can take it off.
2. Wipe it with essential balm, and it will fall off after a while. Just try it.
You can try the eraser. But at first, you may feel that the more you rub, the dirtier you get. But if you rub it for a long time, you will see the effect. This method is tiring and requires perseverance.
4. soak in water, put a little detergent, and then brush with an old toothbrush.
5. Wipe with a cloth dipped in alcohol or spirit Erguotou.
Last winter, I bought a stainless steel basin and baked it on the heater. The label is easy to remove, leaving no trace.
There are also the following things I found online for your reference:
Trademark law for removing stickers
There are always some labels on newly bought stainless steel pot or glassware. After the label is torn off, it is difficult to remove the traces left by the adhesive. Wiping with a wet cloth or scraping with a knife often leaves traces. After many times of practice, I summed up some tips to share with you.
For the self-adhesive marks on the surface of hard objects, we can apply grease-free nail polish remover on the surface of the object, and then gently wipe it with a soft cloth; These traces can also be removed with industrial alcohol or gasoline. If these stickers stick to your skin, you can also remove them with lemon juice.
In addition, hand cream can also achieve the effect of removing adhesive. Hand cream contains a lot of water (generally above 70%) and a certain amount of surfactant. Surfactant has good wetting, penetrating and dissolving ability, and can quickly penetrate between the adhesive and the surface of the object, thus achieving the purpose of cleaning. You can also find some similar products, such as face cream, facial cleanser and detergent, which have the same effect.
For the stubborn adhesive on the carpet, the best way is to carefully trim the adhesive traces on the top of the carpet fluff.
Introduction of other methods:
1. Soap with a little mixture of ammonia and turpentine can remove a lot of dirt and make the glass surface more shiny (this article is suitable for tiles, ceramics, glass, etc. ).
2. Some surfaces can be removed by repeatedly sticking and tearing with transparent adhesive.
3. Wipe it off with a little sodium chloride, or use paint thinner.
You can blow dry with a hair dryer, and then just scrape it gently.
5. Wipe with a cotton swab dipped in nail polish remover.
6, wind oil fine rub.
7. Wipe with special cleaner or sports shoes decontamination cream.
8. You can erase it with 4b eraser for painting, which is a very soft Korean eraser.
9. If the marks left for a long time have hardened, you can soften them with a hot towel and then wipe them.
Can a glass bowl with a glass lock enter the microwave oven?
You can use the microwave, so I use the glass lock, but I can't use it in the oven.
Can the lid of the glass lunch box with Lok button be heated by microwave oven?
It can be put into a microwave oven, but it can't be sealed and heated, otherwise the air pressure in the box is too high, which will lead to the deformation of rice. Lekou has a lunch box that can be heated by microwave oven. You can look at the label. There will be instructions at the bottom of the lunch box. But if it is heated, it is best to open the lid of the lunch box, otherwise it is easy to deform and explode.