Before opening a small clothing processing factory, we first classify the small clothing processing factories:

1. Pure sewing production and processing

Pure sewing production and processing types A clothing processing factory can be started with as little as 30,000 yuan. If you are just setting up a sewing garment processing factory, you only need to understand the sewing process, and you can also accept cutting pieces from nearby manufacturers that outsource processing. There are some very small garment processing factories near Humen that follow this model. They are small workshops without cutting machines and finishing and packaging.

So, the investment only lies in one assembly line or one group of equipment in the workshop. Employees are all on a piece-rate basis. If necessary, hire a master to manage. At the beginning, the boss will be the salesperson, so please work harder. If there are 15 workers with working capital of about 50,000 yuan, it will be fine. In general, you can start a small clothing processing factory with only 80,000 yuan.

2. OEM finished garment processing

OEM finished garment processing, or FOB garment processing factory. We can produce finished products to foreign investors by accepting orders and delivering finished products to corresponding brands, or by completely leaving the country for finished products. Still small.

Extended information:

Cutting technical requirements:

Before cutting, a layout drawing must be drawn based on the template. "Complete, reasonable and economical" is the key to layout. basic principles. The main process requirements in the cutting process are as follows:

(1) Count the quantity when hauling materials, and be careful to avoid defects.

(2) Different batches of dyed or sand-washed fabrics should be cut in batches to prevent color difference on the same piece of clothing. If there is color difference in a piece of fabric, color difference layout should be carried out.

(3) When laying out materials, pay attention to whether the silk strands of the fabric are straight and the direction of the strands of the garment parts meets the process requirements. For pile fabrics (such as velvet, velvet, corduroy, etc.), do not lay them in reverse order. material, otherwise it will affect the color of the clothing.

(4) For striped fabrics, pay attention to the alignment and positioning of the strips in each layer when dragging the material to ensure the continuity and symmetry of the strips on the garment.

(5) Cutting requires accurate cutting and straight and smooth lines. The paving pattern should not be too thick, and the upper and lower layers of fabric should not be uneven.

(6) Cut the knife edge according to the template alignment mark.

(7) When using tapered hole markings, care should be taken not to affect the appearance of the garment. After cutting, the quantity must be counted and the pieces inspected, and the garments must be bundled into piles according to the specifications of the garments, and a ticket must be attached to indicate the style number, part, specification, etc.

Baidu Encyclopedia-Garment Processing