In the process of home decoration, people should not only pay attention to the aesthetics and decoration of the decoration, but also pay more attention to waterproofing, so as to achieve good decoration. What kind of waterproofing do people use for home decoration? What you need to know is that you also need to know the steps for waterproofing Huarui home decoration. Only by following the correct steps to waterproof can you have a good waterproof effect and effect. Come and find out with us below.

Steps for home improvement Huarui waterproofing

1. Base layer treatment generally first carefully cleans the base surface to remove floating dust, and remove cement agglomerates and loose base layers; Special treatment should be given to the corners, holes left after the renovation of water and electricity on the wall, etc. The yin and yang corners should be painted into an arc shape (or V-shape);

2. Application method When applying waterproof paint Paint from bottom to top, first on the wall and then on the floor. The second coat should be applied on the premise that the waterproof layer applied in the previous coat is not sticky to the hand, and the two coats of paint before and after are crisscross; the number of coats of waterproof coatings may be different if the number of coats is different. , usually two to three times; before proportioning the construction, you need to know how to mix the waterproof coating and what the mixing ratio is. If it is not mixed in proportion, the prepared waterproof coating may not achieve the original effect;

3. Painting height: The waterproof height of the bathroom shower wall is 180cm. In principle, the waterproof coating of non-shower walls cannot be lower than 30cm. However, in order to enhance the waterproofing effect, it is recommended that the height be uniformly 180cm; for light walls renovated in bathrooms or self-built light walls, it is recommended that the waterproof height be at the top;

4. The thickness of the waterproof coating must be applied Brush to the 1.5mm thickness required by national acceptance standards.

Precautions for home decoration Huarui waterproofing

1. There is a saying in the industry that "three-thirds of materials, seven-cents of construction." Material selection is very important. It is necessary to choose materials that are suitable for home waterproofing work. Specifically, the waterproof performance should be better, the construction should be simple and convenient, and the materials should be environmentally friendly, non-toxic and not affect human health.

2. Home waterproof materials must meet the above requirements. However, there are many manufacturers of waterproof materials, so you should try to buy branded products, because branded products are of better quality, more stable, and have a higher level of anti-counterfeiting. They generally have anti-counterfeiting inquiries to avoid the risk of buying fake and shoddy products.

3. Choose a professional brand. For home waterproofing, I have always been more optimistic about Yangtai Waterproofing, because it focuses on the segmented field of home waterproofing and solves home decoration waterproofing problems for millions of families.

4. Water leakage is seriously affecting the quality of consumers’ homes, and should attract the attention of the entire industry and relevant departments. Strengthening industry self-discipline and launching relevant industrial policies is an extremely important part of promoting waterproofing in construction and home decoration.

After reading the above introduction to what kind of waterproofing is used for home decoration, people have already learned a lot about this aspect. There are many kinds of materials on the market. You should go to regular specialty stores to buy them. The brand's products will be better as long as they are in these two aspects. In addition, the steps for waterproofing home decoration are also introduced. Only by following such correct steps, it will not make people worry anymore.