The concept of film cutting machine:
Die Cutting Machine is also called beer machine and CNC stamping machine. It is mainly used for corresponding non-metallic materials and self-adhesive materials. , EVA, double-sided tape, electronics, mobile phone rubber pads, etc. die cutting (full break, half break), indentation and hot stamping operations, lamination, automatic waste removal, the die cutting machine uses steel knives, hardware molds, steel wires ( Or a template carved from a steel plate), a certain amount of pressure is exerted through the embossing plate to cut the printed matter or cardboard into a certain shape. It is an important equipment for post-printing packaging processing and molding.
The working principle of the film cutting machine:
The working principle of the die-cutting machine is to use steel knives, hardware molds, steel wires (or templates carved from steel plates), and pass through the embossing plate. Apply a certain amount of pressure to cut the printed matter or cardboard into a certain shape. If the entire printed matter is pressed into a single graphic product, it is called die cutting; if a steel wire is used to press out marks or bent grooves on the printed matter, it is called indentation; if two templates, yin and yang, are used, the mold is Heating to a certain temperature and hot-printing a pattern or font with a three-dimensional effect on the surface of the printed product is called hot stamping; if one base material is used to laminate on another base material, it is called lamination; excluding the remaining parts other than the genuine product is called hot stamping. To eliminate waste; the above can be collectively referred to as die-cutting technology.
Die-cutting machine process:
Die-cutting process is the most commonly used process for packaging printed matter. It uses a die-cutting knife to form a die-cut plate according to the pattern required by the product design. A forming process in which printed matter or other ring-bound blanks are cut into desired shapes or cuts under the action of pressure. The creasing process uses a creasing knife or creasing die to press out line marks on the sheet through the action of pressure, or uses a roller to bend the sheet at a predetermined position. Usually the die-cutting and creasing process is a process in which the die-cutting knife and the creasing knife are combined in the same template, and die-cutting and creasing are performed simultaneously on the die-cutting machine, which is referred to as die-cutting. Process introduction The main process of die-cutting and creasing is: loading → adjusting pressure → determining rules → pasting base materials and auxiliary materials → trial pressure die-cutting → formal die-cutting and creasing → scrap removal → finished product winding or cutting into sheets → counting Package.
Application scope of die-cutting machine:
1. Adhesive products: for various electronics: special electrical pads, silicone stickers, Velcro, conductive adhesive, strong double-sided tape , 3M, Sony special adhesives, backlight screens and other adhesive products used in the electronics industry, IT industry membrane switches, and automobile manufacturing. 2. Dust-proof materials: cosmetic cotton, camera cotton, high-density sponge, filter cotton, dust-proof net, non-woven fabric. 3. Shockproof products: pull-back rubber pads, rubber, transparent foot pads, PORON pads, 3M, flame-retardant EVA, high foaming. 4. Insulation EMI: arson paper, aluminum foil, copper foil, PVC, PET, kraft paper, sponge sheath, pearl sheath. 5. Heat-resistant insulation materials: silicone sheets, transparent mica sheets, fiber cloth, insulation cotton (cloth).
For more information about engineering/service/purchasing tender document writing and production to improve the bid winning rate, you can click on the official website customer service at the bottom for free consultation: /#/?source=bdzd