1. first, lay the object flat on the console and wait for the drip. 2. According to the dosage, take a cup, accurately weigh out glue A and glue B, and mix and stir evenly according to the ratio of 3: 1. 3. Take a clean syringe, suck the prepared glue into the syringe and drip it evenly on the surfaces such as signs and trademarks. 4, 3 to 5 minutes after the drip of crystal glue, observe whether there are bubbles or dust particles on the rubber surface, if there are small bubbles, you can use a small needle to pick it out.

The poured glue drops are cured at room temperature of 2℃ to 22℃ for 1 hours and hardened to become crystal glue drops without touching hands. After dropping plastic, the containers should be cleaned. After the glue hardens, it is insoluble in any solvent. Before it hardens, the machines and containers should be cleaned.

generally, the storage period of crystal drops is 6 months, and they can still be used after 6 months. When using the configured crystal glue, do not pour it back into the original unconfigured package to avoid reaction and jelly phenomenon.

crystal drops should be sealed in a ventilated, cool and dry place, and the shelf life of good quality can reach 36 days.