The basis for the fine for blocking vehicle logos is Article 90 of the "Road Traffic Safety Law of the People's Republic of China" and Article 4.1.1 of the "Technical Conditions for Motor Vehicle Operation Safety". ?

According to the "Technical Conditions for Safety in Motor Vehicle Operations": ?

4.1.1 A motor vehicle should be equipped with at least one permanent safety device on an easily visible part of the outer surface of the front body of the vehicle body. trademark or factory logo that is appropriate to the vehicle brand. ?

4.1.2 Motor vehicles should be equipped with at least one product sign that can be permanently maintained. The fixation, position and type of the sign should comply with the provisions of GB/T18411; if the product sign is marked with a label, the label It should comply with the general performance, anti-tampering performance and anti-counterfeiting performance requirements of labels specified in GB/T25978. Modified vehicles should have both the modified vehicle product label and the pre-modified vehicle (or chassis) product label. ?

According to the "Road Traffic Safety Law of the People's Republic of China": ?

Article 90 Motor vehicle drivers violate road traffic safety laws and regulations on road traffic regulations , a warning or a fine of not less than 20 yuan but not more than 200 yuan will be imposed. If this law provides otherwise, punishment shall be in accordance with the provisions.

Extended information?

The "Motor Vehicle Registration Regulations" stipulates:?

Article 10: A registered motor vehicle has one of the following circumstances: , the owner of the motor vehicle shall apply to the vehicle management office at the place of registration for change registration:?

(1) To change the color of the body;?

(2) To replace the engine;?

p>

(3) Replacement of body or frame. ?

The "Road Traffic Safety Law of the People's Republic of China" stipulates: ?

Article 103: The national motor vehicle product authority fails to comply with the national motor vehicle regulations. If safety technical standards are strictly reviewed and unqualified motor vehicles are allowed to be put into production, the responsible person in charge and other directly responsible personnel will be given administrative sanctions of demotion or dismissal. ?

The motor vehicle models produced by the motor vehicle manufacturer with the permission of the national motor vehicle product department do not implement the national safety technical standards for motor vehicles or do not strictly conduct quality inspection of finished motor vehicles, resulting in motor vehicles with unqualified quality. If the product is sold out of the factory, the quality and technical supervision department will impose penalties in accordance with the relevant provisions of the "People's Republic of China and Domestic Product Quality Law". ?

Zhejiang Government Service Network-Road Traffic Safety Law of the People's Republic of China?

Beijing Municipal Public Security Bureau Public Security Traffic Management Bureau-Motor Vehicle Operation Safety Technical Conditions