Including:

Cutting machine, peeling machine, folding machine 4, roller car (needle car), computer car (applicable to large factories), hemming machine 7, hammering machine Flat machine (applicable to large factories), universal truck, glue spraying machine (applicable to large factories).

Process: sampling - proofing - cutting - running and binding - binding - shaping - buckling - shoe polishing - spray polishing - packing.

Specifically:

1. First, it must be developed by the development department. After the shoe shape is designed, the pattern is made, and then the last shape and the overall structure of the shoe are determined. These determined data A development bill of materials will be formed and then flowed to the cutting and marking departments.

2. In the process of making shoes, some leather materials are used, and some are leather materials. Irregular leather materials need to be cut piece by piece by hand.

3. After cutting the material, you need to cut the bag, combine the upper and the inside of the shoe, and then carry out stitching after compounding - use a sewing machine to shape the combined materials as a whole, and use thread to handle them. Sew it up.

4. After the sewing machine is the bagging process. The bagging process requires the use of a shoe last, covering the upper leather on the shoe last to shape the bagging.

5. Some shoe-making companies have mechanized this process, but they still need to nail a few nails by hand to nail the rough position, and then the machine will automatically perform high-pressure shaping.

6. Then apply glue on the sole, use a hydraulic machine to combine the upper and sole, and then polish them.

7. After polishing the upper, spray paint and polish it. Finally, the shoes will become very bright after drying.