The models of indoor and outdoor units of split air conditioners are inconsistent.

When air-conditioning manufacturers design and produce the indoor and outdoor units of split-type air conditioners, they are done separately. Each has its own model, code and bar code. After being produced in the warehouse, it is shipped in complete sets. Shipping on the market.

However, the product nameplate of the air conditioner indoor unit will have the model of the complete unit, the indoor unit model and the corresponding outdoor unit model, while the product nameplate of the outdoor unit will have the model of the outdoor unit. As long as If the product model on the nameplate of the indoor and outdoor unit corresponds to the complete set, it can be determined that it is a complete set of air conditioning products. Installation location:

The air conditioner should be installed away from heat sources, and hot air removal and noise interference should not affect neighbors. The installation height of the outdoor unit should be lower than the indoor unit, which is beneficial to the circulation of refrigeration oil.

The outdoor unit should be installed without hot air short-circuit circulation to avoid affecting heat dissipation: the installation location should be conducive to maintenance, easy to drain and not affect passers-by. It should avoid or stay away from high-voltage lines, places with radiation and flammable places. Explosive places.

There should be no obstructions in front of the indoor unit, and the jet distance of the cold air should be ensured to make the indoor temperature more uniform.