First, skillfully remove the label of the plastic cup.
1, with degreasing agent. Such as synthetic engine oil, nail polish remover (acetone) and lighter oil (those fuels used in lighters such as Naphtha ZIPPO). Test whether these degreasers are safe for your plastic products first-some degreasers will damage your plastic products. Choose an inconspicuous spot on the plastic product, dip a cotton swab in the degreasing agent of your choice and wait for at least 20 minutes. If there is no response, it proves that the degreasing agent you choose is safe for your plastic products.
2. Dip it with a rag or pour the degreasing agent directly on the label, or tear the label and pour it on the rubber residue.
3. Wipe in circles from the middle to the outside until there is no trace.
Tip:
1, if you don't like to use these chemicals, you can also use an eraser.
Although it will leave some stains on the box after wiping, it can be washed off with soapy water. 2. Usually, before tearing these labels, it is best to blow dry them with a hair dryer or cover them with hot water, so that the glue and labels can be loosened by heat before tearing them.
3. If you have peanut butter at home, you can try it. The grease in peanut butter will melt the glue, and finally the peanut butter can be wiped off with a paper towel.
4, solid car wax is also very easy to use, apply a layer on the surface of the label, and it can be removed after three minutes.
5, vinegar will do, wet it, wait a minute, wipe it off.
Second, cleverly remove the label of the glass cup.
Self-adhesive labels on newly bought glasses and other products are particularly difficult to tear. How to remove the label quickly and perfectly, leaving no trace? Today, I will share with you the method I have explored ~ It is also applicable to the removal of sticky trademark labels on other commodities (iron products and so on). ) ~ it makes the surface temperature of the label paste rise.
1. When hot water is poured into the glass, the label is not attached. At this time, the cured adhesive restores its viscosity, so that the label can be easily torn off completely.
2. The label has been completely torn off, but there is glue on the glass surface; Apply hand cream where there is glue, similar to the principle of compatibility, wait a minute ~ now the glue is very clean,
3. Wipe it off with a rag/toilet paper.
Success! Take one from the side, clean and smooth, without any glue residue, perfect ~ Similarly, this method is also effective for ceramics and bone China cups. The above is the introduction of how to remove the label from the cup. In life, we often encounter the problem that the labels of glass products and plastic products such as cups, water bottles, bowls and basins are difficult to remove. The above methods are also applicable.
Let's learn quickly.