Don't use a cleaning ball brush to avoid scratching, just soak it in water and gently circle it with your nails.
2. Some surfaces can be removed by repeatedly sticking and tearing with transparent adhesive.
3. scald with hot water, blow with a hair dryer, and slowly tear it off while it is hot.
You can blow dry with a hair dryer, and then just scrape it gently.
5. Apply some wind oil essence to the glue, wipe it off with a cloth, and there will be no offset printing. It is very easy to use. Just try it.
6, soak in vinegar, baking soda water, put on toothpaste, put on sesame sauce, and it will be easy after soaking.
7. It's smooth and non-sticky when coated with kerosene. Apply a few drops of edible vegetable oil, such as linseed oil, salad oil and blended oil.
Wipe it hard with a rag, it will fall off soon, then drop a few drops of detergent (except for the greasy one just now), wipe it with a rag a few times, and then rinse it with water!
Any area will do, just add a lot! It works every time! Oil can be solved! Oil can dissolve paint!
8. Use cotton swab dipped in alcohol, nail polish remover, rosin water, banana oil, sodium chloride solution and acetone to scrub, or use paint thinner.
Note: most of the alcohol in plastic products can be used, and there are no other corrosive substances that will turn white and corrode.
7. Wipe with special cleaner or sports shoes decontamination cream.
8. A little hard eraser is also very effective. It's best to use 4b eraser. It's soft and of good quality. Wash with water when wiping.
9. Soap with a little mixture of ammonia and turpentine can remove a lot of dirt and make the glass surface more shiny (this article is suitable for tiles, ceramics, glass, etc. ).
The above tips are all from the network.