This brand is still good, and it is very environmentally friendly. You can learn about the skills of choosing wooden doors, which will be very helpful to you. 1. Do you want to buy a good wooden door and see the paint? 1. Look at and feel the fullness of the paint film. This will be seen after a few more comparisons. The plump paint film shows that the paint has good quality, strong cohesion and good sealing to wood. At the same time, it shows that the painting process is relatively perfect and there is no suspicion of cutting corners. ? 2. Stand on the oblique side of the door to find the reflective angle of the facade, and see if the paint film on the surface is flat, whether the orange peel phenomenon is obvious, and whether there are any protruding fine particles. If the orange peel phenomenon is obvious, it means that the baking process of paint film is not enough; ? 3, fancy door, depends on the edge of the line that produces the shape, especially the internal corner (that is, the corner that can be seen but can't be touched). ? 4. Ask about the type of paint, and the basic answer will be PU paint. Please note that the advantage of PU paint is that it is easy to polish, and the processing process is time-saving and labor-saving. The disadvantage is that the paint film is soft, and it is easy to produce white dent when slightly bumped. If at least one of the paint layers is PE paint, this possibility will be greatly reduced. PE paint (polyester paint) has the advantages of hard paint film, strong hiding power and good transparency, which can better express the wood skin texture. However, it is difficult to polish and the processing process is time-consuming and laborious, so most manufacturers are reluctant to adopt PE coating. ? Second, buy a good wooden door to see if it matches? The shape of wooden door should be consistent with the decoration style of the room. The decoration style of furniture is mainly divided into Chinese, European, simple, mixed and classic, etc. If the decoration of the room is European, it is best to choose European-style wooden door, for example, carved wooden door and European mirror take photos with each other. As the wooden door is closely related to the decoration style, it is suggested that the owner should have a clear plan in advance for which room to use which door before decoration. ? Our practical functions can be roughly divided into: main entrance door, bedroom door, study door, living room door, kitchen door, bathroom door, balcony door and so on. The entrance door is also the facade. From the perspective of aesthetics and practicality, most people will choose a strong and heavy security door with decorative effect; The warm and heavy wooden door used as the bedroom door can also bring the owner a sense of peace and security; The bathroom door can be glass door, and if the area permits, it can also be wooden door or wooden door with glass lattice. ? Third, buy a good wooden door to see environmental protection? 1. Smell the smell, that is, it is especially important to smell the smell when purchasing. First, open the closed door, probe in and smell it, and see if there is any irritating smell. If it makes people cry and sneeze, it means that the formaldehyde emission is relatively high, and there may be problems. Don't buy it. ? 2. Look at the report, that is, the consumer asks the dealer for the quality inspection report to see if the release of various harmful substances in the wooden door is within the scope allowed by the standard. ? 3. Most wooden doors with excessive release of harmful substances use cheap artificial plates, so the price of a whole set of wooden doors is often "ultra-low". Because cheap artificial boards use a lot of inferior glue, the release of various harmful substances is seriously exceeded. Therefore, be wary of falling into the low price trap. ? Fourth, buy a good wooden door to see the flatness of the surface? 1. The foaming of the wood veneer indicates that the wood veneer is unevenly heated in the process of attaching, or the gluing is uneven. The flat hot press can solve the problem of uneven heating when attaching the skin of the flat door; ? 2, the wooden door surface roughness is not enough, indicating that the plate selection is relatively cheap, and the flatness of the plate is not enough. It is conceivable that the environmental protection performance is also difficult to meet the standard, which means a little rather critical; ? 3. Look at whether the process joints are even and small: Look at whether the process joints are even and small, which is almost the same as the car, which directly reflects the comprehensive process level of the enterprise; ? Five, good wooden door to buy to see the quality? 1. Look at the appearance, depending on the color, details and texture. The color of high-grade paint should feel transparent, bright and soft compared with the "positive" light paint, while the dark paint should be dark but not black, matte and not dark, with delicate and smooth hand feel, and the overall visual effect should be uniform, clean and beautiful. Looking at the details, it mainly depends on whether the hidden bolt holes of keyhole and hinge hole are neat, whether the joints of door leaf structure and door cover structure are detailed, and whether the gaps between door leaf and door cover are even. Judging from the texture, generally speaking, if there are natural wood holes on the surface of wooden doors, the materials and technology are relatively better, which not only retains the sound insulation characteristics of natural wood, but also reflects the excellent materials, avoiding the totally enclosed effect to cover up the defects of materials and shoddy them. ? 2. According to the report, high-grade wooden doors should have a detailed description of materials, structure, quality and performance issued by the state to help us understand their various properties. ? Sixth, good wooden doors to buy hardware? Hardware is a very easy thing for wooden door manufacturers to argue with customers in judging the quality of door products. It is suggested that customers try not to buy other hardware parts themselves. If manufacturers really can't provide satisfactory hardware products, they must choose the hardware products of famous brand manufacturers. Such products are generally guaranteed for life. ? Seven, finally look at after-sales service? More and more enterprises find the importance of after-sales service, especially some large well-known brand enterprises provide one-stop after-sales service, but some small brands still do not provide this service.