Look at the window grilles above the door handles in the car for specific views on right-angle turns. The operation methods are as follows:

1. Before entering the right-angle project, drive the body closer to the right in advance. Be prepared to straighten the right edge of the project. If you move closer to the right after entering the project, it will be too late!

2. Two meters before entering the project is the satellite positioning card reading area. When the vehicle drives here, the prompt tone "Right Angle Turn" will be announced in the car. After hearing this prompt tone, you have already Enter the system evaluation right-angle project state, and parking is not allowed at this time.

3. After entering the project, visually check that the right third of the front of the car is covered with the right edge line of the right-angled project. At this time, the distance between the car body and the right edge line is about 30 centimeters.

4. At this time, the distance between the cars should be kept at about 30 centimeters. If the right line is pressed, 100 points will be deducted. If the distance is too wide, the point position will be inaccurate, which may lead to corner rolling or line pressure.

5. Next is the important point one. Look at the window grille on the triangular glass above the left door. When the window grille is aligned with the corner, quickly hit the direction. It should be noted that if the distance between the car body and the sideline is about 30 centimeters, the direction is fast. If the distance is wider, the direction is slow.

6. Point 2: You can also look at the front of the car when turning. When the front of the car covers the solid line in front, quickly turn to the left. It should be noted that at this point, the sooner or later you need to turn in the direction depends on your height. If you are taller, you should turn in the direction quickly when the front of the car just touches the solid line. If you are shorter, you have to wait until the front of the car is just on the solid line, that is, you can quickly turn the direction when you can't see the solid line.

7. When the vehicle does not roll over corners or lines after turning, do not think that it is over. You must continue to drive forward and wait until the vehicle has completely exited the right-angle area before it can stop. In addition, when doing right-angle projects, it is okay if the front of the car sweeps the line. The judging criterion is whether the wheels roll over the line, and no pause or stop is allowed in the middle.