Grey cloth, embroidery thread, ink, hand embroidery machine, cellophane, scissors, iron, etc.

Methods/steps

& gt0 1

1. pattern: a pattern designed by a designer.

2. Pattern: Draw a pattern on the pattern paper according to the ratio of 1: 1.

3. Typing: Typing the pattern into a needle draft.

& gt02

4. Positioning: place the needle draft on the fabric, and the pattern corresponds to the embroidered cloth. 5. Printing: The faded powder mixed with kerosene is printed on the drawing.

& gt03

6. Wiring: It is also the most critical step. Use all kinds of silk threads to match the color of flowers and the color effect of patterns.

The more complete the silk thread segmentation, the more natural the gradient, the richer the color and the more vivid the embroidered pattern. 7. Stretching: Use a piece of cloth to tighten, and gradually embroider one color, one color at a time. Fix the cloth on the circular frame, put the cloth fixed on the frame under the hand embroidery machine and embroider it bit by bit. The continuous and flexible transfer of hands and the speed control of feet are used to ensure the fine workmanship quality.

8. Ironing: After the embroidery is finished, cut off the redundant thread, iron it with a steam iron and finalize the design, and the embroidery is finished.

Matters needing attention

When printing, the pinhole should not be too big or too small, and the stitch should be kept as uniform as possible. If the pinhole is too large, the paper will be damaged easily, and the pinhole will be blocked by the small hole ink.