Article Sales Contract (Selected 5 articles)
If the debtor of the contract transfers the debt, the new debtor can of course assert the defenses of the original debtor against the creditor. I am here to share with you some item sales contracts, I hope it will be helpful to you, thank you!
Article Sales Contract Part 1
Car seller (Party A):
Car buyer (Party B):
1. The owner of Party A transfers the electric vehicle, license plate number: , frame number: to Party B. Both parties agree that the total transaction amount is (currency: uppercase: , lowercase ￥ yuan).
2. Party A is responsible for all traffic accidents and economic disputes that occurred in the car before year month day and has nothing to do with Party B. Party B will be responsible for any traffic accidents, economic disputes and illegal activities that occur from the date of delivery of the vehicle, i.e. year, month, day, and have nothing to do with Party A.
3. Due to the difficulty in transfer procedures, the car will not be transferred. From the date of delivery of the car, Party B will be responsible for all subsequent costs of purchasing the car.
4. This agreement is made in two copies, with Party A and Party B each holding one copy. It will take effect after being signed and sealed by both parties. If there are any unsettled matters, they can be resolved through negotiation between the two parties.
Party A: Telephone:
Party B: Telephone:
Signing time: Article Sales Contract Part 2
Rights holder: _______________ ( (Hereinafter referred to as Party A)
Address:
Risk warning:
Review of the cooperation partners before signing will help to Adopt corresponding countermeasures on supply and payment terms to avoid risks.
Note: Understand the basic information of the partner and keep a copy of its business license. If the partner is an individual, record his or her ID number, home address, and phone number in detail. Understanding this information will help us better perform the contract. At the same time, when a dispute arises, it will help our litigation and court enforcement.
Authorized party: _______________ (hereinafter referred to as Party B)
Address:
In order to give full play to their respective advantages, Party A and Party B jointly develop Party A’s _______ _Liquor sales market, in accordance with the "Contract Law of the People's Republic of China", the two parties have reached an agreement as follows based on the principles of good faith, market development, mutual benefit and common development:
1. Sales relationship
1. Party A and Party B establish a sales relationship based on this contract. Without special written authorization from Party A, Party B only has the right to sell Party A’s products, and Party B has no right to make any commitments or commitments on behalf of Party A. Incur any debt.
2. The nature of the cooperation between Party B and Party A is ________ dealers.
2. Sales area and period
1. Party B’s sales of Party A’s products are limited to sales within ________ (divided by administrative region), and sales beyond this area are not allowed without authorization .
2. If Party B needs to open up other regional markets, it must obtain the written consent and authorization of Party A.
3. Sales period: from _________year________month________ to _________year________month________day.
3. Products for sale
1. The products for sale are Party A’s existing ________ and other series of products (hereinafter referred to as products). The quality and packaging standards are subject to the standards of the product manufacturer. .
2. If Party A develops other new products, Party B will be notified of the specific sales policy separately. With the agreement of both parties, Party A and Party B can sign another contract or this contract shall prevail.
3. Party B agrees to sell products according to the price system agreed by both parties.
4. Sales Target
1. Party B’s purchase amount during the validity period of this contract shall not be less than ____________ ten thousand yuan per year.
2. Party B must complete the sales target. If Party B’s purchases for three consecutive months are less than _______ of the sales target amount, or when the accumulated target amount for that month is _______, Party A has the right to unilaterally Termination of contract.
Risk warning:
The reconciliation method, confirmation form, payment time, invoice issuance and other matters should be agreed upon to prevent the two parties from having disagreements or even litigation disputes during the actual performance process. .
As a supplier, special attention should be paid to clearly stipulating in the sales contract the payment time and amount of the buyer's payment (it should be clear whether the price includes tax). It is recommended to stipulate in the contract that the demand party is required to pay a certain amount of advance payment or deposit (which cannot exceed 20% of the total contract amount) before the supplier can ship the goods, or it is stipulated in the contract that the supplier will ship the goods after receiving the full payment from the demand party. .
5. Payment method
When Party B orders products from Party A, the full payment of the total order amount must be transferred in advance to Party A's designated account in cash or money order.
6. Delivery and freight methods
Risk warning:
Generally, the risk of damage or loss of goods is transferred with the transfer of ownership of the goods. Goods that are movables are subject to ownership. Transferred upon delivery. For example, if it is agreed in the contract that the delivery location is the supplier's warehouse, it means that once the goods leave the warehouse, the risk of damage or loss will be transferred to the demander. Therefore, when signing the contract, the choice of delivery location must be , should be treated with caution.
If the goods are sent to the local area, the delivery location should be clearly agreed upon, which is related to the jurisdiction of the court when handling disputes; if the goods are sent to other places, try not to specify it, but try to agree that the jurisdiction of the local court will be .
In addition, the name of the person in charge of the consignee (sample signature) should be listed in the contract. The purpose of this is to prevent the other party from not recognizing the fact of receipt of the goods after the person in charge leaves, which would cause difficulty in producing evidence in the lawsuit.
1. Delivery time: Party A will ship the goods within ten days after confirmation of payment. If Party B orders more than ___________ pieces, Party A will ship the goods in batches and installments on the principle of not affecting Party B's sales.
2. Means of transportation: Both parties agree to use economical and safe means of transportation. The choice of means and means of transportation is decided by Party A, but long-distance means of transportation lasting more than one day are mainly train transportation.
3. Expenses: The settlement price between the two parties listed in this contract includes the freight for the goods to be transported to the nearest railway station where Party B is located, freight insurance, and post-arrival expenses, such as transfer fees, unpacking fees, and loading and unloading fees. , short-distance transportation fees, etc. shall be borne by Party B.
Risk warning:
Delivery, signature and acceptance matters should be agreed upon, especially when the consignor or consignee is a third party designated by one party, be sure to keep them Invoices, receipts, and other transaction vouchers should be recorded with notes in case the other party does not acknowledge the existence of the aforementioned transactions during settlement, payment, or quality problems.
In order to protect the reasonable interests of the supplier, the sales contract should generally limit the time for the purchaser to conduct product inspection. That is, if the purchaser does not raise quality issues within the limited time, it will be deemed to be an inspection. qualified. At the same time, in the sale of mechanical equipment, it is also recommended that the buyer agree not to use the product until it passes the quality inspection (acceptance). Otherwise, it will be deemed to have passed the acceptance, and the supplier will no longer be responsible for subsequent quality problems.
4. Picking up the goods for inspection: When Party B picks up the goods, if the damage to the goods is less than ________‰, it is normal transportation damage, and Party B shall bear the loss. If the damage to the goods exceeds ________‰, Party B shall claim the damage to the goods by the railway department and insurance The company's valid certification documents shall be notified in writing to Party A within ________ days, and Party A will assist Party B in making a claim. Party B will be deemed to have no objection if it exceeds ________ days.
5. After Party B signs the receipt of the goods, the ownership of the product will be transferred from Party A to Party B.
No personnel of Party A may transfer or borrow goods at will without the written permission of Party A. Party B shall be responsible for all risks arising from distribution of goods and payment recovery during the operation process.
6. After receiving Party A’s goods, Party B must issue a receipt confirmation (fax or mail) stamped with Party B’s official seal to Party A, and list in detail the items, quantity and amount of the goods received; If Party A is not notified within three days after receiving the goods, Party A will be deemed to have delivered the goods correctly.
7. Rights and Obligations of Party A
1. Rights
(1) The right to enforce Party B’s operating conditions, price execution, and flow of goods Supervision and management.
(2) Provide guidance to Party B in its operation and management. If Party B is found to be irregular or ineffective in its market operations, it has the right to make reasonable suggestions to Party B until the contract is terminated.
(3) If Party B violates the terms of this contract, Party A may notify Party B in writing to terminate the contract and hold Party B liable for breach of contract.
(4) Party A may adjust product prices based on market conditions and costs. Party A does not need to obtain Party B's prior consent to adjust product prices, and is not responsible for any claims made by Party B regarding product price adjustments.
2. Obligations
(1) The products provided by Party A must comply with the product quality production standards of the People's Republic of China and the National Liquor Industry, and ensure long-term and stable product quality.
(2) Assist Party B in marketing work.
(3) Fulfill all kinds of support promised in writing, including compensation, rewards, promotional items, advertising and marketing support to Party B. Oral promises are invalid.
(4) According to Party B’s ordering requirements (after the payment is credited to Party A’s account), the goods will be shipped to the delivery location agreed upon by both parties.
(5) If the product is unsaleable due to delay in Party A’s supply or early termination of the contract by Party A according to the contract, Party B’s remaining products shall be paid by Party A at the original CIF price (according to the price issued by Party A at the time of supply) All documents, goods numbers and batch determination) are fully recovered so that Party B can truly achieve zero-risk operations, but the packaging must be intact (in units of pieces)
(6) When Party A adjusts product prices, it must do so in advance Party B shall be notified formally in writing within one month. The written notice shall be kept as an attachment to the contract for review.
8. Rights and Obligations of Party B
1. Rights
(1) If due to the quality of Party A’s products, Party B may submit a return request to Party A in writing , it can be returned after confirmation by the national quality inspection department.
(2) Have the right to put forward business suggestions that are beneficial to market promotion.
(3) If Party A violates the terms of this contract, Party B shall notify Party A in writing, and Party A shall provide a written reply based on specific matters within ____________ days. If Party A fails to do so within the agreed time, After making a written reply, Party B may notify Party A in writing to terminate this contract.
2. Obligations
(1) Party B must assign a dedicated person to be responsible for the sales of Party A’s products. Within ________ days after the contract is signed, a marketing team of more than ________ people shall be established to distribute the products. Tools should be put in place immediately, and various management rules and regulations should be formulated and improved to quickly improve service terminal capabilities.
(2) Party B shall pay a certain amount of market management deposit and sell within the sales and distribution area agreed by both parties at the price specified by Party A, and shall not sell across regions or sell at low prices without authorization.
(3) Product sales should strictly implement the product channel price signed by both parties. If the price needs to be adjusted, Party A’s formal written notification shall prevail. Vicious dumping at low prices or deliberately high-price sales are strictly prohibited.
(4) Party B shall not sell counterfeit Party A products or any infringing products of Genghis Khan series product trademarks or patents. If any counterfeit and shoddy products are found, Party B shall promptly notify Party A in writing (fax or letter) ), and assist Party A in anti-counterfeiting activities.
(5) Party B should actively and proactively do a good job in marketing and strive to complete the group purchase and sales tasks determined by both parties.
(6) Coordinate and cooperate with promotional activities, including coordination between various functional departments and terminals, and assist in the management of event gifts, wine tastings, and image ladies.
(7) Strictly implement the task volume and monthly ordering plan determined by both parties, and make market sales forecasts to ensure sufficient product inventory and prevent market outages.
(8) Distribute goods strictly in accordance with the number of terminals and targets determined in the contract.
(9) Party B shall provide product sales reports, inventory and information required for Party B’s assessment on a monthly basis.
(10) When signing a sales agreement with the terminal, Party B must make it clear that the liquor products distributed to the terminal should include _______ all series of wines, and actively assist in the sales of the Genghis Khan series of wines.
(11) Party B shall collect or cooperate with Party A’s personnel to collect local market dynamics, competitive product information and materials and transmit them to Party A.
9. Market Management Security Deposit and Security Deposit Management
1. Party B promises to pay Party A a market management security deposit of _______ ten thousand yuan within _______ days after signing the contract. Upon payment of the deposit, this contract will automatically terminate.
2. Deduction of deposit
(1) Party B is not allowed to sell products to the wholesale market. If this happens, Party A has the right to deduct _______ of Party B’s deposit for the first time and for the second time. The right to deduct _______, and the third time the right to deduct the full amount and terminate the sales agreement.
(2) Party B shall sell products to customers at all levels at prices agreed upon by both parties. If the price is lower than the price, Party A has the right to deduct _______ from Party B’s deposit for the first time and _ for the second time. ______, the third time has the right to deduct the full amount and terminate the sales agreement, product authorization sales contract, product authorization sales contract.
(3) Party B is not allowed to sell products to markets outside the agreed area. If this happens, Party A has the right to deduct _______ from Party B’s deposit for the first time, _______ for the second time, and _______ for the third time. shall be entitled to deduct _______ and terminate the sales agreement between both parties.
(4) If Party B mixes and sells Party A’s products with counterfeit or fake products, or maliciously sells at low prices to impact Party A’s key markets, Party A has the right to deduct Party B’s full deposit in one go and terminate the contract between both parties. Sales Agreement.
3. The deduction of Party B’s market management deposit will not affect Party A’s right to pursue legal liability for losses caused by Party B’s breach of contract and infringement.
4. Market management margin does not accrue interest.
5. Market management deposit refund: If Party B does not commit the above-mentioned breach of contract during the contract period, Party A shall return the deposit to Party B in full within _______ days after the termination of the contract; otherwise, both parties will_ The remaining deposit shall be settled within ______days.
10. Trademarks and other intellectual property rights
Party A’s registered trademarks, patents, company names and other intellectual property rights belong to Party A. Although this contract is signed, Party B does not authorize Party B to use Party A’s registered trademarks, patents, company names and other intellectual property rights owned by Party A. Party B may not use them without authorization except with Party A’s written permission. Otherwise, Party B will be held accountable for infringement in accordance with the law.
11. Signature and seal
1. This contract or the supplementary agreement (or attachment) to this contract and the new rights and obligations of both parties reached during the performance of this contract Agreements should be in writing and signed by the legal representatives of Party A and Party B or their authorized persons, and stamped with the contract seal or official seal; otherwise, the contract or document will be invalid.
2. The behavior of all Party A’s regional business personnel or other personnel stationed in Party B must be based on this contract. Party A will not be responsible for the consequences of any behavior that exceeds the provisions of this contract and is not specifically authorized by Party A. Bear corresponding legal responsibilities; neither Party A nor Party B shall use the oral commitments of the other party's business personnel or employees of other companies as the basis for changing the matters agreed by the company. If it is really necessary to add content, it must be agreed by both parties and supplemented in writing. The official seal serves as an attachment to the contract.
3. Without the consent of Party A in a written and sealed official document, any lending behavior of Party A’s personnel to Party B shall be deemed as personal behavior, and Party A shall not be responsible for any consequences and responsibilities arising therefrom. , Party B has the right to pursue personal debts owed by the individual.
4. Within _______ days from the date of signing this contract, Party B remits the first batch of purchase payment to Party A. If it exceeds the time limit, it will be deemed to be automatically abandoned. This contract will terminate automatically. The first batch of goods will be determined after negotiation between both parties. The purchase amount shall not be less than _______ million yuan.
Risk warning:
As a supplier, the demander’s liability for breach of contract for delayed payment should be clearly stated in the contract. At the same time, the payment process and deadline of the demander’s payment should also be determined based on the supply situation. etc. to carry out necessary controls. If the demander is delayed in payment or difference in payment, etc., he/she shall be held accountable for breach of contract according to the circumstances to reduce risks.
In addition, the amount of liquidated damages should not be too high or too low. If it is too high, there may be a risk of being changed by the arbitration institution or the court, and if it is too low, it will not be conducive to binding the buyer. Therefore, it is recommended to leave it to a professional lawyer to assist you.
12. Liability for breach of contract
1. If Party B violates the agreement on price and area in this contract, it can be dealt with according to the agreement in Article 9.
2. If the behavior of either party constitutes a breach of contract, the other party may be held liable for breach of contract in accordance with the law.
3. The contract is terminated when the written notice of termination of the contract reaches the other party. If the contract needs to be terminated for reasons other than those agreed upon, both parties must reach an agreement through negotiation, otherwise it will be deemed a breach of contract and the other party will be compensated for the losses suffered thereby.
4. Other liability for breach of contract shall be implemented in accordance with the relevant provisions of the Contract Law.
13. Others
1. This contract will take effect after being signed by the legal representatives or authorized persons of both parties and stamped with the contract seal or official seal. After this contract takes effect, it will replace all negotiation agreements between the two parties before the contract takes effect, as well as various contracts and agreements signed by Party A and Party B before.
2. For matters not covered in this contract, the two parties will negotiate to form a contract attachment, which will have the same legal effect after being signed and sealed by both parties.
3. If any disputes arise between Party A and Party B during the business cooperation process, they should be resolved through friendly negotiation. If negotiation fails, both parties agree that the dispute shall be under the jurisdiction of the court where Party A is located.
4. This contract (together with the attachments) is made in _______ copies. Party A and Party B each hold _______ copies, which have the same legal effect.
Risk warning:
For some supply and marketing companies that cooperate with each other all year round, it is very cumbersome to sign a contract for each supply. Both parties can sign a year-round sales contract to eliminate the aforementioned worries.
However, even if a perennial sales contract is signed, considering that the product specifications, prices, and quantities of each purchase and sale are different, the specific matters of each transaction are based on the order signed and confirmed by both parties. Therefore, , special attention should be paid to retaining transaction vouchers and payment settlement vouchers and keeping them properly.
Party A:
Legal representative:
Contact information:
Contract signing time: _________year_______month______ _Day
Party B:
Legal representative:
Contact information:
Signing time: _________year_______month_ ______ Daily Goods Sales Contract Part 3
Party A (full name):
Party B (full name):
In accordance with the "Contract Law" and "Construction Law" and other relevant laws and administrative regulations, and following the principles of equality, voluntariness, fairness and good faith, both parties reach consensus on the construction matters of this professional subcontracted project and enter into this construction contract.
Article 1 Project Overview
1.1 Project Name:
1.2 Project Address:
1.3 Project Content :
Article 2 Project Construction Scope and Method
2. 1. Project practices and construction preparations: The base wall must meet the quality standards after project acceptance. Before construction, the base wall shall be Dust, dirt, oil stains, etc. are cleaned and the surface is smoothed.
2. 2 Construction points: Quality inspection The construction of the base wall and insulation layer must meet relevant standards. The structural layers must be firmly bonded without delamination, hollowing, cracks, etc.
2. 3 Construction process: exterior wall insulation or exterior wall interior insulation paint finish and tile facing process: base treatment (concrete and other smooth walls need to use conventional interface mortar) → set of formulas , hanging vertically, elastic control lines, punching bars, making openings, re-inspection → Approval and application of Yintong products → Elastic grid lines, open grid grooves, embedded drip channels → Paint (face tile) finishes.
Methods 2 and 4: Party B only supplies YT inorganic active wall thermal insulation system materials, excluding construction.
2.5 On-site materials: Party B shall submit relevant material samples and inspection reports in a timely manner. Party B's entry materials must be consistent with the samples and information description. Both parties agreed that Party B's entry materials are Nanyang Yintong Class A non-combustible YT inorganic active wall thermal insulation system.
Article 3 Contract Price`
Contract unit price: calculated at 475 yuan per ton (including freight, excluding taxes).
Article 4 Payment Method
Party A will deposit the project payment for the required materials into the account of the company or the person in charge of the project ten days before construction. The required Nanyang YT brand thermal insulation materials are calculated. 1,030 tons, totaling 489,250 yuan. The company will organize staff to deliver the goods within ten days after receiving the payment, and company technicians will enter the construction site to provide guidance when the project starts.
Article 5 Liability for breach of contract
5. 1. If one party fails to perform its contractual obligations as agreed and causes losses to the other party, it shall bear liability for compensation; if it is punished for violating relevant legal provisions, The ultimate responsibility rests with the responsible party.
5. 2. If one party is unable to continue to perform the contract, it shall promptly notify the other party, and the responsible party shall bear the losses caused by the termination of the contract.
5. 3 If Party A’s representative fails to give necessary instructions, confirmations, and approvals in a timely manner, fails to perform his various obligations and make payments as stipulated in the contract, or takes other actions that make it impossible to perform the contract, he shall be liable for breach of contract. Responsibility, the construction period will be postponed accordingly.
Article 6 Methods for resolving contract disputes:
1. Party A and Party B conduct mediation;
2. If mediation fails, the dispute shall be submitted to the Qingdao Municipal People’s Court in accordance with the law. Prosecution.
Article 7 After the signing of this contract, if Party A and Party B need to propose modifications, they can sign a supplementary agreement as a supplementary contract to this contract after both parties reach consensus through negotiation.
This contract is made in two copies, with Party A and Party B each holding one copy. The contract will take effect from the date of signature by both parties.
Article 8 Supplementary Clauses Date and year of conclusion of this contract (effective from today)
Party A:
Party B:
Address:
Address:
Legal representative:
Legal representative:
Authorized agent:
Authorized agent:
Telephone:
Telephone: Article Sales Contract Part 4
Supplier: ________(Party A)
Buyer: ________(Party B)
Place of contract signing: ________
1. Product name, trademark, model, quantity, amount, delivery time and quantity
2. Quality requirements and technical standards: DAP: refer to the national standard __________; NPK: refer to the national standard ________.
3. Place of delivery (pick-up), mode of transportation, arrival station and cost burden: Delivery by Party A’s wholesale department;
4. Party B’s response to the quality and quantity of Party A’s products: Any objections should be submitted in writing to Party A within ten days after receipt of the goods, and relevant written materials such as shipping records should be provided.
5. Reasonable loss calculation method: Party A and Party B coordinate and handle according to the "National Uniform Fertilizer Distribution and Handover Method".
6. Packaging standard: 50Kg/bag or 40Kg/bag, plastic inside and braided outside, double-layer packaging.
7. Price: If the unit price is stipulated in the first article of this contract, it shall be implemented as agreed; if there is no unit price agreed or the unit price is unclear, the price in the order confirmation letter shall be implemented.
8. Payment time and method: Payment will be made in a bank-approved manner upon payment and delivery. If Party B fails to pay the payment in accordance with the provisions of this article, Party A has the right to unilaterally terminate the contract or postpone delivery.
9. Party B shall declare the delivery flow plan to Party A in writing so that Party A can declare the delivery plan.
10. Party B’s target sales volume in the designated area in _________ year should reach more than 1,000 tons, and fulfill its obligation to store Party A’s products during the winter storage period. Party B enjoys the exclusive distribution rights of the brand in the area agreed by Party A.
11. In Party B’s sales area, if there are inspections by industry and commerce, technical supervision, agriculture and other relevant market law enforcement departments and local anti-counterfeiting activities, Party B will be responsible for coordinating and straightening out relations and organizing personnel to cooperate with local functional departments. Carry out anti-counterfeiting activities. Party A shall be responsible for any losses and liabilities caused to Party B due to the unqualified quality of Party A's products.
12. During the cooperation period (the contract is signed once a year, from the effective date of the contract to _________year________month________), if Party B fails to perform in accordance with the terms of this contract Party A has the right to notify Party B to terminate the cooperative relationship at any time.
13. If a dispute occurs during the performance of the contract, it shall be resolved by negotiation between the two parties performing the contract. If negotiation fails and a lawsuit occurs, it shall be under the jurisdiction of the People's Court where the plaintiff is located.
14. This contract will take effect after it is signed and sealed by representatives of Party A and Party B. Faxed copies have the same legal effect.
15. Other agreed matters: The prices agreed in the first clause of the ________ contract are all tentative prices, and the specific settlement price will be implemented in accordance with the relevant price policies agreed in the order confirmation letter.
16. Matters not covered in this contract shall be resolved through negotiation between the two parties.
17. This contract is made in one copy, with Party A and Party B each holding one copy.
Party A (signature and seal): ________ Party B (signature and seal): ________
_________year________month________day Article Sales Contract Chapter 5
p>
Procurement unit (Party A):
Supplier (Party B):
According to the "Government Procurement Law of the People's Republic of China" and other laws and regulations and procurement Document, Party A and Party B have negotiated and reached the following terms:
Article 1 Equipment brand, specifications and models, quantity, price and others
Equipment name:
Quantity:
Amount:
Total contract price (RMB in lowercase letters): _________yuan
Total contract price (in RMB in uppercase letters): _________yuan
Article 2 Quality Assurance
The equipment provided by Party B is a qualified product that complies with national technical specifications and quality standards, has been certified by the national "Three Cs" or inspected by relevant national departments, and has not been developed. The use of the box shall be consistent with the model and configuration stipulated in the contract, and can be connected normally with the user's existing equipment; after the equipment is installed and debugged, it can ensure the security of Party A's system within the functional scope of the equipment and operate stably. The equipment supplied shall comply with Party A’s procurement requirements. The software product is the original product package or the license agreement provided by the original manufacturer. If the equipment supplied does not comply with the contract, Party A has the right to refuse or return the goods, and Party B shall bear all responsibilities and consequences arising therefrom.
Article 3 Delivery Time and Place
1. Party B shall deliver the supplied equipment ( Factory original packaging) shipped to the designated location for unpacking, responsible for installation, debugging and equipment integration, installing other related software according to Party A's requirements (the software copyright is the responsibility of Party A), and submitting it to Party A for acceptance after normal operation.
2. When the supplied equipment is delivered for use, Party B must provide Party A with product instruction manual, quality guarantee certificate, three-guarantee certificate and other relevant information and original accessories.
Article 4 Acceptance
After Party B transports the equipment supplied to the delivery location for unpacking, installation and debugging, Party A will inspect and accept it on the spot. The product models provided by Party B will be unified and consistent. The description is consistent.
Article 5 Liability for breach of contract
1. If Party B fails to perform the contract within the time limit, Party B shall pay Party A a daily liquidated damages of the total contract price of _________ from the date of overdue; If delivery cannot be made 10 days overdue, Party A shall pay liquidated damages equal to the total contract price of _________.
2. If Party A overdues the payment for goods, it shall pay to Party B a daily liquidated damages of _________ of the total contract price from the date of overdue; if Party A refuses to pay the payment for goods without justifiable reasons, Party A shall pay Party B Liquidated damages to pay _________ of the total contract price.
Article 6 Dispute Resolution
If a dispute arises in this contract, the supplier and the buyer shall negotiate and resolve it in a timely manner. If the negotiation fails, the Government Procurement Law of the People's Republic of China shall be followed. stipulated processing.
Article 7 Effectiveness of the Contract
1. During the performance period of the contract, neither Party A nor Party B may change or terminate the contract at will. If there are any unsatisfied matters in the contract, Party A and Party B must first negotiate and enter into a supplementary agreement. The supplementary agreement shall have the same legal effect as this contract.
2. This contract is made in two copies, with Party A and Party B each holding one copy.
Party A (official seal): _________ Party B (official seal): _________
Legal representative (signature): _________ Legal representative (signature): _________
_________year____month____day_______year____month____day