1. The washing machine cannot be started.
Reason for failure:
—— The socket is dead.
-The power switch is not turned on
-Power supply line failure
-Power switch or control panel failure
Solution:
-Check whether there is electricity in the socket.
-Make sure the power switch is turned on.
-Check whether the power supply line is normal.
-If all the above are normal, you may need to contact the after-sales service center for maintenance.
2. The washing machine can't feed water or drain water smoothly.
Reason for failure:
-The tap is not turned on.
-There is something wrong with the water inlet pipe.
-Water inlet solenoid valve failure
-Clogged drain pipe
Solution:
-Check that the tap is turned on.
-Check the water inlet pipe for problems.
-Check the water inlet solenoid valve for problems.
-Clean the drain pipe.
3. The washing machine is difficult to start or has abnormal noise or vibration.
Reason for failure:
-Internal imbalance or load imbalance of the washing machine
-The washing machine base is unstable.
-The drive belt is worn or loose
-Motor failure
Solution:
-Make sure the load of clothes is balanced.
-Adjust the base to make it more stable.
-Replace the drive belt or adjust its tightness.
-If necessary, contact the after-sales service center to replace the motor.
4. The washing machine cannot be dried or the drying effect is not good.
Reason for failure:
-There is dust or small sundries in the dryer.
-The heating element of the dryer is faulty.
-Cooling fan failure
-Dryer control panel failure
Solution:
-Clean the dust and sundries in the dryer.
-Replace the damaged heating element.
-Replace the damaged hot fan.
-If necessary, please contact the after-sales service center to replace the control panel.
In short, if your Sakura washing machine encounters any fault, please try to check whether your equipment has the above problems and repair it according to the corresponding solutions. If the problem has not been solved, you can contact the Sakura brand after-sales service center for help.