It is necessary to fill in the shipping mark to facilitate the consignee to pick up the goods at the port of destination. Are the goods loaded directly into the container at the factory? Or is it just sent to the freight forwarder's warehouse? If the former is the case, there is nothing you can do. The container will be sealed with lead strips after it is loaded. If the latter is the case, you can go to the warehouse. The most convenient thing is to print the shipping mark. Print 4 for each box and stick them on the 4 sides. Originally, it should be divided into 2 for the side and 2 for the front. The content is a little different. The front one is relatively complete, while the side one is relatively simple. But for your convenience, just print 4 identical ones. The content reference is as follows: The customer's company name abbreviation or product trademark can be DESC: followed by the name of the goods QTY: followed by the number of products in the box MEAS: fill in the length, width and height of the wooden box X how many X how many (CM) G.W.: Fill in the gross weight KGSN.W.: Fill in the net weight KGSC/NO. Fill in which box 1- is this? For example, if there are 100 boxes per box, it would be 1-100, 2-100, 3-100 and so on, which is easier to find. It's enough to write these basics. If your product is more complex, such as different colors in each box, then you need to add COLOR: The color is better, but I guess you don't know what color you put in after sealing the box. .