Can be pasted on stationery, cups and bowls, furniture, electrical appliances, metal products, porcelain, motor vehicles or non-motor vehicles, mobile phones, notebooks, game machines, advertising trademarks, industrial indicators and other multi-element series products, which are widely used and are also a major product in the printing industry. Also printed with various cartoon characters and other patterns. You can paste at will, most of them are disposable.

How to use the mask:

Tools used in the dry bonding step: clean rag, scraper, credit card.

1. Clean the pasting position of the car body. If possible, you can use a cloth that can't use fiber, and scrub it with 50% alcohol, isopropanol or acetone, or soapy water; The surface cleaned with solvent can only be pasted after the solvent is completely volatilized.

2, under normal circumstances, slowly stick, while scraping with tools, while uncovering the backing paper.

3. If the length and width of the car sticker are less than 10 cm, you can tear off all the stickers and stick them again. However, care must be taken to avoid accidentally sticking or falling to the ground and sticking up dust.

4. Use a clean rag or scraper [such as a phone card or credit card] to repeatedly scrape or scrape the film; Until there is no bubble on the car sticker, it is recommended not to expose to the sun or wash the car within 24 hours.