How to choose customized furniture panels:

1. Look at the craftsmanship: panel furniture is often drilled to install connectors, wooden tenons, laminate supports and other accessories. You can Observe from the drilling hole whether the material of the board is uniform, the arrangement is neat, and the color is uniform.

2. Look at the color and gloss: The surface of a good plate should be shiny, and it should reflect light to a certain extent, giving it a metallic texture.

3. Look at the flatness: The surface treatment of a good plate is also quite good. The surface of the plate is flat and smooth, and it feels smooth to the touch without feeling particles, dents or thorns on the fingers. feeling.

4. Look at the hardness: The hardness and strength of a good plate are also very good. If you scratch it with gravity or sharp objects, there will be no scratches, and the surface of the plate will be as smooth as ever.

5. Look at the trademark: Well-known panel manufacturers will put their own logos on the panels they produce. Some are embossed and some are gravure printed. Take a closer look to see if there are any marks on the furniture panels to identify the panels. of origin.

6. Look at the density of the material: You can look at the core of the board from the incision of the board. The interior of a good board should be uniform and dense without any gaps. No matter where it is cut from, the incision is full, with no seams or holes. It cannot be pinched with a fingernail, and it is impossible to leave nail marks on it.

7. Look at the edge sealing: the most basic treatment is to seal the edges on both sides. It is better to adopt four-sided edge sealing. The four-sided edge sealing is the most environmentally friendly. The edge banding strip must be thick enough and tightly integrated with the core of the board to avoid degumming.

8. Formaldehyde content: smell. Get close to the board veneer and smell if there is any pungent odor. If there is, and it is irritating to the point of tears, the formaldehyde content may have greatly exceeded the standard value. This kind of board is not a good board, and it will cause great harm to human health if left in the room for a long time. Colleagues and consumers can also check the relevant quality inspection report certificates of the merchants for an extra layer of protection.

9. Plate thickness: The standard cabinet body plate thickness is 18mm, and the back panel and door panel are generally 9mm. Some small manufacturers will advertise their 16mm plates as 18mm, so be sure to check this carefully.

10. Weigh the weight of the board: A good board has uniform wood, few or no impurities, and a relatively high density, so it is relatively heavy and feels heavy when held in the hand.