How to clean and maintain the range hood (I) How to clean the range hood is a headache. We have to clean the range hood by using it. Before use, sprinkle a thin layer of soap powder on two oil storage boxes, and then inject about one third of water, so that the recovered oil floats on the water surface, and then do the same thing after dumping. Or you can put a small disposable oil box in the oil storage box, and take out the waste oil and throw it away after it is collected slowly. In addition to the first time we cleaned the range hood, the waste oil filtered out the top layer of grease, and it can also be used as a detergent to wipe the fuselage.
(2) How to clean the body of the range hood. The range hood mainly consists of casing, air duct, fan, check valve, oil collecting and discharging device, lighting device, power switch and power cord. It is necessary to distinguish between what can be cleaned and what can't be cleaned. First of all, cut off the power supply of the smoking machine to ensure the most basic life safety. Unscrew the screws on the casing with a screwdriver, and remove the casing and the oil net. If the oil stain on the oil net is thick, first scrape off the excess oil stain with a tool, then put it in warm water mixed with neutral detergent, soak it for three minutes, and then wipe it with a clean rag.
(3) How to clean the fan blades of the range hood? In addition to oil fume cleaning, you can also clean the fan blades with a mixture of detergent and vinegar, which is pollution-free to human body. There is also a high-pressure steam method. The specific method is to put half a pot of cold water in the pressure cooker and heat it. When steam is continuously discharged, take the lower limit pressure valve, turn on the range hood and aim the steam water column at the rotating fan blades, and the oily sewage will flow into the waste oil box along the oil drain tank. The turbine of the range hood is treated in the same way.
Misunderstanding in purchasing range hoods 1. It is really completely free of disassembly and washing
Generally speaking, the range hoods should be disassembled and washed after one year of use, otherwise the smoke exhaust effect will be affected due to the attachment of the turbine and the inner cavity lampblack. Therefore, after all, the lampblack is pervasive, even if it is completely sealed, as long as there is a gap of .1mm, the lampblack will enter the inner cavity. Although the lampblack machine can operate normally, the suction will be greatly affected, and the noise will become louder and louder, which will also shorten the life of the lampblack machine. The so-called no-disassembly and washing range hood does not mean that you don't need to clean the range hood. Now most range hoods can separate the fume, but not cleaning the range hood at all will still affect the smoke exhaust effect, so it is still necessary to clean the fuselage, oil net and oil cup regularly.
2. The greater the power, the greater the suction.
Although increasing the power can increase the air volume and air pressure, the exhaust air volume and the soot suction rate are not equal. And the greater the power, the more noise will be generated, and it will consume more electricity. Generally speaking, there are two factors that determine the suction efficiency of the range hood: one is the exhaust air volume, and the other is the distance between the air inlet of the range hood and the pan surface. Among them, the latter is the most important for the pumping effect, and the closer the distance, the cleaner the pumping. On the other hand, if the installation distance of the hood is too high from the pan surface, most of the air sucked into the hood is the surrounding air, and the exhaust air that really acts on the lampblack is very few, and no matter how much power is used, it is just useless. Therefore, the greater the power, the better. In addition, it also depends on the internal cavity structure, turbine and motor quality and other factors. If only the power is high and other items are not up to standard, it will only consume more power.
3. The material of the panel doesn't matter
The material of the fuselage panel often makes consumers confused. In fact, the fuselage of the range hood is exposed to the corrosion of all kinds of oil fumes every day, and the material requirements are very important. The panel of the range hood is made of cold-rolled steel plate sprayed with plastic, stainless steel, plastic and ceramics. The better materials in China are generally imported M-Cr fine steel material, which has oxidation resistance and corrosion resistance. To distinguish the difference between this kind of material and general alloy material, you just need to try it directly with a magnet. What can be absorbed is general alloy or iron, and what can't be absorbed is fine steel material.
4. Inner cavity design doesn't care
The inner cavity is one of the important factors that determine the smoke exhaust ability. On the one hand, it should be seamless and easy to clean, and at the same time, it should be able to protect the lines so that all kinds of lines can work normally under the condition of strong corrosion such as oil smoke. The seamless design should not only be seamless in the cavity, but also be seamless with the surface parallel to the stove, so that there is really no clean dead angle.
Top list of range hoods: Fangtai Fotile
Fangtai is one of the 5 most valuable brands in China, a leading brand in high-end kitchen appliances industry and a well-known trademark in China, and many consumers like Fangtai cabinet products very much. Fangtai attaches great importance to brand building. After years of image building, Fangtai has become a well-known brand in the industry and established a good brand image.
2: Robam, the boss
The boss range hood is well-known as a household name. As one of the most influential brands in the kitchen appliance industry in China, the boss brand has grown into one of the top 5 brands in Asia and has strong brand competitiveness.
3: Sakura Sakura
Sakura range hood is also a very good brand. It was founded in Taiwan Province, China in 1978. In China, Sakura Kitchen & Bathroom (China) Co., Ltd. holds this brand. As a famous trademark in Jiangsu Province, Sakura has grown into a well-known brand in the market and consumers' minds.
Four: Shuaikang
Shuaikang is one of the top 5 companies in Asia, and its strength can be imagined. It is a well-known brand in China range hoods. After years of development, Shuaikang household appliances brand has now grown into one of the largest kitchen and bathroom appliance manufacturing bases in China, with a huge annual production capacity.
v: vantage Vatti
vantage is an influential brand in the kitchen and bathroom industry, a famous trademark in Guangdong province, which belongs to Zhongshan vantage gas appliance co., ltd. its products have high added value and scientific and technological content, and it can be regarded as the industry leader in the whole kitchen and bathroom market. Six: Six: Midea
This household appliance brand of Midea must be very familiar to everyone! Midea range hood was founded in 1981. It is a well-known listed company with very strong enterprise strength, and Midea brand is also one of the most competitive brands. Midea Group Co., Ltd. is one of the top 5 Chinese enterprises, a large household appliance group and an advanced enterprise in the industry.
seven: Germany and Italy Dandy
German and Italian household appliances are also very popular. Under the background of advocating green kitchen in society, Germany and Italy have also upgraded their products, and new technology products have made outstanding performance in environmental protection.
Eight: Haier
Haier's household appliances are widely known in China. Haier not only has a high market share, but also the market popularity of Haier products is very high. Now Haier Group is one of the top 2 Asian enterprises, and Haier has also become the first brand of white goods in the world.
IX: Siemens
Siemens is a German brand and an internationally renowned brand, which is very competitive in the market. Siemens not only occupies a large market in China, but also has strong competitiveness in other countries and regions around the world.
1: Wanhe Vanward
Guangdong Wanhe New Electric Appliance Co., Ltd. is a national key high-tech enterprise, a famous trademark in Guangdong Province and a famous brand in China. Although the competition in the range hood market is fierce, Wanhe can still get a slice of it, which has already shown that Wanhe is different.
Guess what you are interested in:
1. How to clean and maintain the dirty shoes
2. Cleaning methods and maintenance measures of dirty shoes
3. What are the classification methods and skills of cleaning machines
4. Cleaning methods and skills of air conditioners.