solid wood furniture, also known as log furniture, refers to furniture made of pure wood, that is, all wood is natural wood that has not been reprocessed, and furniture made of wood-based panels is divided into pure wood furniture and imitation wood furniture. Pay attention when buying.

the commonly used Furniture wood are Fraxinus mandshurica, Ulmus northeast, eucalyptus globulus, camphor wood, basswood, birch, colored wood, teak, beech, cherry wood, rosewood, cypress, yew, Korean pine, oak, pineapple, walnut, Schima superba, rosewood, mahogany, etc.

Generally, the real texture of wood can be seen on the surface of solid wood furniture, which is simple and calm. Occasionally, the surface with tree knots also reflects fresh and natural materials, which are natural and free from chemical pollution. Solid wood furniture is not only fashionable but also healthy, and it is the first choice for modern urbanites to advocate nature. Don't praise the top ten brands of solid wood furniture too much. There are many business doorways, so you won't miss it as long as you learn how to distinguish between various solid wood and furniture technologies. < P > = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = In home decoration, many owners are concerned about the cost of decoration. Therefore, before the renovation, we must plan well, and only good planning can reduce the cost. Here, Xiaobian specially synthesizes the warmest home improvement information this winter for you, so that you can dress up the most beautiful home

1. Verify that solid wood

One of the mysteries of judging whether it is solid wood furniture is: wood grain and knot scar.

if the appearance of a cupboard door looks like a pattern, then look at the corresponding pattern on the back of the cupboard door corresponding to the position where the pattern changes. If it corresponds well, it is a pure solid wood cupboard door.

In addition, it is also a good way to identify solid wood by looking at the knots: look at the location of the scarred side, and then look for the corresponding patterns on the other side.

second, judge the tree species

this is a factor that directly affects the price and quality.

common solid wood furniture usually uses beech, white oak, Fraxinus mandshurica, elm, beech, rubber and oak, while expensive mahogany furniture mainly uses rosewood, chicken wing and rosewood.

The market of solid wood furniture is quite chaotic, and there are often things like shoddy and confusing tree species. It is best to buy brand-name products. At the same time, it should be noted that the price of wood is rising day by day, and it is absolutely cheating if it is too cheap.

Third, observe the wood

Open the furniture doors and drawers to observe whether the wood is dry and white, and whether the texture is tight and delicate. If there is furniture made of particleboard, density board and primary molding board, open the cupboard door or drawer and smell it to see if it has irritating smell.

iv. finding defects

there should be no big knots or cracks in the main stress-bearing parts of furniture, such as columns and load-bearing bars near the ground between connecting columns. The structure is firm, the frame shall not be loose, and tenons and materials are not allowed to be broken.

All the components of wood-based panels used in furniture should be edge-sealed, and all kinds of accessories should be installed without missing nails or penetrating nails.

V. Inspection strength

The strength of the board surface can be pressed with your fingers to feel the firmness of the board surface. One side of the material should be fixed with a well-shaped skeleton. If the skeleton is sparse, it will feel empty and unreal when you press the surface, and the panel will vibrate greatly. Drawer bottom plate should be pressed by hand to test the strength. Generally, the bottom of partition plate is multi-layered, and the partition plate with large area should be made of five layers.

VI. Safety performance

Observe whether the drawer or door frame is tilted, and whether the tenon eye position is crooked or the eye hole is too large, and the tenon is not strict and other parts are skewed.

Wooden furniture should be safe and stable. When two cupboard doors are opened at 9 degrees, gently pull them forward by hand, and the cabinets should not automatically turn forward. The glass of the bookcase door should be edged; The mirror and dresser should be equipped with a back plate, and the glass surface should be fixed by layering. Individual parts of furniture (such as legs and feet, drawers, doors or brackets, etc.) must have sufficient supporting force. You can nudge the upper corner of the furniture or sit aside to see if the furniture is firm.

VII. Inspection interface

Heavy furniture should be screwed with protective blocks at the corners and glued well. As for the back plate, it must also be checked whether it is inlaid and screwed.

VIII. Test slideway

Drawers should be solid and firm, and screws should be tightened inside. You might as well open drawers, movable desktops, cupboard doors and other parts to see if they can be used freely and connected correctly.

IX. Touch the surface

Put your hand on the surface of the furniture and carefully check whether the polished surface is smooth, especially to see whether the parts such as the foot of the table are rough, whether the paint is painted with streaks, whether the paint at the corner is painted too thick, and whether there are cracks or bubbles.

when the panel is covered with veneer and other materials, it should be similar to the color of the complete set of products, and the paint film on the surface of the product is not allowed to wrinkle, stick and leak paint.

ten, "handstand" test

Turn the chair and upholstered furniture upside down and see how they are made.

as for the table, check it from the bottom. See if the joints are reinforced with screws and wedges, and whether the slats are tightly buckled with the crosspieces? Are there any extra glue and fillers in the joints?

= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = > Brand recommendation:

Connected Meijia, montes, etc.

In 29, the top ten brands of solid wood furniture were 1 Huafeng (China famous trademark, China famous brand, top ten brands of solid wood furniture)

2 Federated (China famous trademark, China famous brand, first-line brand/brand, top ten brands of solid wood furniture)

3 Nanyang Hushi (top ten brands of solid wood furniture, Tianjin leading brand of solid wood furniture in 1993)

4 Huari (. Top ten brands of solid wood furniture)

5 Shuang Ye (China famous brand, top ten brands of solid wood furniture, Heilongjiang famous trademark)

6 Guangming (top ten brands of solid wood furniture, listed companies, Guangming Group furniture)

7 Huahe (China famous brand, first-line brand/brand, top ten brands of solid wood furniture)

8 Ximengbao (top ten brands of children's furniture, pine furniture brand). Xiamen Ximengbao)

September Star (a famous brand in China, the top ten brands of solid wood furniture, the largest household and circulation brand in East China)

1 Temple of Heaven (a well-known trademark in China, a famous brand in China, and the top ten brands of solid wood furniture).