Where is the best place to put the light cat? First, the light cat is placed in a multimedia box.
If you want to save trouble, it is more appropriate to put the light cat in the multimedia box, because the optical cable reserved after fttp will not save much. The space reserved by the developer in the multimedia box is enough for the optical cat and a router (or switch), but putting the optical cat in the multimedia box does not affect the Internet access. In fact, what really affects the whole house WIFI signal is the choice and location of the router. On the contrary, it will be more beautiful to hide the light cat in the multimedia box, so it is more appropriate to put the light cat in the multimedia box.
As for the "no dead angle" and "stable network speed" of the whole house WIFI signal you want, you don't need to worry at all now. Even a 200~300-flat large flat floor, or even a villa with 2~4 floors, can easily achieve full network coverage and seamless switching. You can do this easily by choosing a mesh router. Even if your room doesn't have a network cable, you can fully cover "black technology" with a suitable large-sized apartment and multi-layer WIIF.
Second, the light cat is placed in the TV cabinet in the living room.
Putting the light cat in the TV cabinet in the living room is actually the best choice, because the living room is the center of the home, and the coverage of WIFI signal is much smaller than the multimedia box at the door. However, it is necessary to solve the problem of optical cable extension. The easiest way is to contact the internet service provider and ask them to extend the optical cable to the TV cabinet in the living room for you. If you extend it yourself, you can buy an optical fiber extension cable online.
Note: When purchasing TV cabinets, the placement of light cats, switches and routers should be considered in the style selection. In addition to routers, light cats and switches should be hidden in cabinets to avoid being messy. Merchants are also required to open holes in the back of TV cabinets for easy access.
Third, how to make the WIFI signal at home have no dead ends?
I believe many people have upgraded their home routers, replacing two antennas with three antennas and three antennas with four antennas, but the effect will not be very good. As long as the WIFI signal is separated by two walls, it will become very poor, the network speed is very slow, the game is stuck, and the video is buffered. How to make WIFI signal cover the whole house?
It is recommended to use a mesh router for networking. For example, your home has three floors. In the past, optical cats and routers were placed on the first floor, and the signals on the second and third floors were poor or there was no WIFI signal at all. Even if the second and third layers of wiring route relay, it is too much trouble to manually switch grids every time.
After using the Mesh router, you put the Mesh parent router on the first floor, and the child routers A and B are placed on the second and third floors respectively. When you walk from the first floor to the second floor with your mobile phone, you will automatically connect to the A sub-router on the second floor seamlessly, and when you walk to the third floor, you will automatically connect to the C sub-router. These three routers can be connected by wire, wireless or power line, and you can transmit the network by plugging them into the socket.
Conclusion How to release light cats after fttp? It is actually the best choice to put the light cat in the TV cabinet in the living room, but for the sake of simplicity and convenience, it is more suitable to put the light cat in the multimedia box. For owners with high network requirements or large family population, it is recommended to choose Huawei's mother-daughter router, which is simple and convenient. The mother-child router can be used for three rooms and two halls, which saves a lot of money compared with AC+AP scheme.