First of all, you need to observe whether your picture on X 1 shows a machine tool or a workpiece, that is, it is very important to determine the coordinate system of the machine tool or the workpiece. If it is a machine tool coordinate system, the display of 385. 136 is the value of $AA_IM[ax 1]; Otherwise, the value of $AA_IW[ax 1] will be displayed. If you can't see which coordinate system it is, it will have the effect of changing the world. The source of this value is actually the value fed back from the encoder, specifically, the encoder where the position loop works.

The driving values are all in the driving r parameter, such as r63. The corresponding NC system variables can be found through the NCVAR software, and then these values can be easily read in the NC program or HMI interface.

WinSCP can access CF card under linux system. Host name should be filled in with the IP address of the visited NCU, which is generally192.168.214.1(x127). Port access can also be192.168. User name, use manufact. The password uses Siemens standard password. Because of the limitation of forum rules, you can't say it. In fact, everyone knows that passwords should be capitalized. Ok, you can connect now, just click login.