The main product categories are: JDEL series bucket elevator, JDMS series scraper conveyor, JDMC series arc scraper conveyor, JDSC series screw conveyor, JDJBC series single-drum belt conveyor, JDBC series single-drum belt conveyor, JDBSU series three-drum belt conveyor, JDDQ series bridge stacker, JDBSD series belt conveyor and other conveying equipment. JDEL series bucket elevator;

1. The head wheel adopts rubber coating technology, which increases the friction series, prevents the belt from slipping and running off, and improves the transmission efficiency.

2. The frame adopts gravity tension, and the tail wheel adopts spoke self-cleaning structure, which effectively prevents the material from sticking to the wheel surface and affecting the lifting effect.

3. The machine head is equipped with a non-return device, which can prevent the blocking phenomenon caused by the reversal of the lifting belt due to the emergency stop.

4. The cabinets are made of high-strength plastic cabinets, which have the advantages of high strength and large filling coefficient.

5. All parts impacted by materials are equipped with detachable polymer wear-resistant lining plates.

6. Provide safety protection devices such as access door, observation window, dust suction port, incidental speed, deviation, anti-blocking and shaft temperature detection.

7. The whole machine has beautiful appearance, large lifting capacity, good sealing performance, long service life, low energy consumption and low material crushing rate.

8. Widely used for vertical transportation of large tonnage, ultra-high granular and powdery materials such as ports, docks and silos. JDMS series scraper conveyor:

1, the chain adopts high-strength welded bent plate chain, and the shaft pin, chain plate and scraper are specially treated, which has the characteristics of high cloth strength and good wear resistance.

2. The scraper is made of special ultra-high polymer wear-resistant materials to avoid direct friction between the conveyor chain and the scraper shell, effectively reducing the running noise and prolonging the service life of the equipment.

3. The cover plate, bottom plate and side plate of the equipment are of detachable structure, which is convenient for maintenance and replacement.

4. The tail is equipped with a fixed guide rail tensioner, which has less failure rate, good sealing performance, convenient operation, easy maintenance and replacement.

5, simple structure, flexible process arrangement, multi-point feeding or discharging.

6, configuration channel, observation window, dust, belt speed, anti-blocking and shaft temperature detection and other safety protection devices.

7. The whole machine has beautiful appearance, large conveying capacity, good sealing performance, long service life, low energy consumption and low material crushing rate.

8. Widely used for large-tonnage and long-distance transportation of various granular, flaky and powdery materials in ports, docks and silos with horizontal or inclined angles less than15. JDMC series curved scraper conveyor;

1, the chain adopts high-strength welded bent plate chain, and the shaft pin, chain plate and scraper are specially treated, which has the characteristics of high strength and good wear resistance.

2. The scraper is equipped with special super-strong polymer wear-resistant materials to avoid direct friction between the conveyor chain and the scraper shell, effectively reduce the running noise and prolong the service life of the equipment.

3. The tail is provided with a fixed guide rail tensioning device, which has small fault, good sealing performance and convenient operation.

4, simple structure, flexible process arrangement, multi-point feeding at the head and single-point discharging.

5. Equipped with manhole, observation window, dustproof air inlet, and safety protection devices such as speed measurement, anti-blocking and shaft temperature detection.

6. The whole machine has beautiful appearance, large conveying capacity, good sealing performance, long service life, low energy consumption and low material crushing rate.

7. It is widely used for conveying various granular, flaky and powdery materials with an inclination angle of 0 ~ 90. JDSC series screw conveyor (auger);

1. Screw conveyors are divided into two series, one is a "semicircle" type, that is, a common screw conveyor, and the other is a "full circle" type, that is, a tubular screw conveyor. Spiral blades can be divided into left-handed, right-handed, equal pitch and variable pitch.

2. The shell is integrally formed and the blades are integrally pressed, which fully ensures the equality of pitch and the consistency of concentric angle.

3. The middle suspension structure is made of ultra-high molecular wear-resistant materials, which can reach 7 times of the wear resistance of steel materials, and there is no need for oiling and lubrication during operation to avoid material pollution.

4. It is equipped with access port, observation window and dustproof air inlet, and can be equipped with auxiliary structures such as anti-blocking door and bottom cleaning door according to user's requirements, and equipped with safety protection devices such as speed measurement, anti-blocking and shaft temperature detection.

5. The whole machine has beautiful appearance, good sealing performance, long service life, flexible process layout and multi-point feeding and discharging.

6. Widely used for horizontal, inclined or vertical transportation of various granular, flaky and powdery materials. JDJBC series air cushion belt conveyor;

This series of products have few fault points, good sealing effect, long service life, large conveying capacity, stable and reliable operation and low energy consumption. The whole process of the equipment is sealed, which is especially suitable for logistics places with high requirements for transportation environment. The transmission part is all external, which is convenient for maintenance. The specific features are as follows:

1. The head wheel is coated with rubber to increase the friction coefficient, prevent the belt from slipping and running off, and improve the transmission efficiency. The driving roller, the driven roller and the tensioning roller are all checked by static balance and dynamic balance.

2. The machine head is equipped with a special scraper cleaning device to ensure that all conveyed materials can be discharged into the nose funnel; At the position where the headband enters the driving drum from the air chamber, in order to prevent the material from overflowing, a logistics guide device is arranged at an appropriate position; A V-shaped sweeper is arranged above the tail return belt to clean the materials in the no-load section of the conveyor belt.

3. Both the bearing (material) layer and the return (empty) layer adopt unique air cushion structure. Because the upper and lower structural forms are basically the same, the operation flexibility of the equipment is relatively large, and the upper and lower conveyor belts are in a closed state, it is especially suitable for cold, high humidity and rainy areas in the south, effectively preventing condensation.

4. The tail adopts a sealed self-cleaning material returning device, which fundamentally solves the problem of material accumulation at the tail, thus achieving the overall sealing effect of the equipment.

5. The feed inlet is provided with a centering adjustable buffer baffle, so that the materials can be centered and accumulated when falling on the conveyor belt, and the impact of the materials on the belt is reduced. Adjustable rubber baffles are arranged on both sides of the feed tank to prevent material leakage.

6. Set an independent air supply section in the whole length of the conveyor to reduce the impact between airflow and avoid pressure loss caused by long conveying distance. An air leakage valve is set at the proper position of each air supply section to discharge excess gas and ensure that the conveyor belt does not float; Two adjacent air chambers are connected by inserting, so as to reduce the height error of the contour surface at the joint of the air chambers.

7. The head and tail of the conveyor are equipped with special built-in (conveyor belt) elastic deviation prevention devices; The tail is equipped with a proprietary pressure balance structure.

8. According to the length and service conditions of the equipment, the unique closed telescopic screw tensioning mode, fixed guide rail gravity tensioning mode and slide rail trolley gravity tensioning mode can be adopted, and a tensioning limit device is provided.

9, equipped with access, observation window, dust suction, belt speed, deviation, anti-blocking and shaft temperature detection and other safety protection devices.

10, which is widely used to transport various granular, flaky and powdery materials with large tonnage, long distance or inclination less than15, such as ports, docks and silos. It can be used alone, or it can be a horizontal or inclined conveying system composed of multiple or other conveying devices. JDBC series single idler belt conveyor;

This series of products has the advantages of few operation failure points, low operation noise, long service life, stable and reliable operation, multi-point feeding or unloading, low energy consumption and so on. The whole process of the equipment is sealed, which is especially suitable for logistics places with high requirements for transportation environment. The transmission part is all external, which is convenient for maintenance. The specific features are as follows:

1. The head wheel adopts rubber coating technology to increase the friction coefficient, prevent the belt from slipping and running off, and improve the transmission efficiency. The driving roller, the driven roller and the tensioning roller are all checked by static balance and dynamic balance. A special "plow" cleaning device is installed at the exit to ensure that all conveyed materials can be discharged into the nose funnel, and a "V"-shaped sweeper is installed above the tail feeding belt to clean the materials in the conveyor belt section.

2. The bearing layer adopts dumbbell-shaped single idler structure, and the transmission parts are external, which is convenient for maintenance; The return journey adopts the structural scheme without idler, and the upper and lower conveyor belts are isolated from the outside, which has good dustproof effect.

3. The tail adopts a sealed self-cleaning material returning device, which fundamentally solves the problem of material accumulation at the tail, thus achieving the dust-proof effect of the whole equipment.

4. The feed inlet is provided with a street buffer baffle with adjustable centering, so that the materials can be centered and accumulated when falling on the conveyor belt, and the impact of the materials on the adhesive tape is reduced. Rubber baffles are arranged on both sides of the feed tank to prevent material leakage.

5. The contact parts between the bottom plate and the side plate and the conveyor belt are provided with ultra-high polymer antistatic and wear-resistant linings, which effectively prolongs the service life of the equipment.

6. The head and tail of the conveyor are equipped with special built-in (conveyor belt) elastic deviation prevention devices.

7. According to the length and service conditions of the equipment, the unique closed telescopic screw tensioning mode, fixed track gravity tensioning mode and slide rail trolley gravity tensioning mode can be adopted, and a tensioning limit device is provided.

8. Equipped with safety protection devices such as access port, observation window, dust suction port, belt speed, anti-blocking and shaft temperature detection.

9. Widely used in ports, docks, silos and other large-tonnage long-distance transportation of various granular, flaky and powdery materials, with the horizontal or inclination less than 15. It can be used by single machine, multi-machine, or form a horizontal or inclined conveying system with other conveying equipment. JDBSU series three-roller belt conveyor;

This series of products is divided into two structural forms, one is "open" structure and the other is "semi-closed" structure. The equipment has the advantages of simple structure, good sealing effect, large conveying capacity, long conveying distance, multi-point feeding or discharging, stable and reliable operation, low energy consumption and low cost, and the specific features are as follows:

1. The head wheel is coated with rubber to increase the friction coefficient, prevent the belt from slipping and running off, and improve the transmission efficiency. The driving roller, the driven roller and the tensioning roller are all checked by static balance and dynamic balance.

2. A special "plow" type cleaning device is installed at the exit of the machine head to ensure that all conveyed materials can be discharged into the funnel of the machine head, and a "V" type sweeper is installed above the tail feed belt to clean the materials in the no-load section of the conveyor belt.

3. The load-bearing layer adopts a grooved three-idler structure, and the groove angles are 30, 35 and 45. The larger the slot angle, the higher the conveying output. The feeding place adopts three rollers, which are called interval buffer grooves. In order to prevent the conveyor belt from running off, three idlers with self-aligning grooves and parallel lower idlers are arranged in each 10 group in the middle section.

4. The feed inlet is provided with a street buffer baffle with adjustable centering, so that the materials can be centered and accumulated when falling on the conveyor belt, and the impact of the materials on the adhesive tape is reduced. Rubber baffles are arranged on both sides of the feed tank to prevent material leakage.

5. According to the length and service conditions of the equipment, spiral tension mode, fixed guide rail gravity tension mode and slide rail trolley gravity tension mode can be adopted, and there is no tension limit device.

6, equipped with access, observation window, dustproof air inlet, equipped with speed measuring, anti-blocking, shaft temperature detection and other safety protection devices.

7. Widely used in ports, docks, silos and other large-tonnage long-distance transportation of various granular, flaky and powdery materials, with the horizontal or inclination less than 15. It can be used alone, or it can be a horizontal or inclined conveying system composed of multiple or other conveying devices. JDDQ series bridge stacker;

This product is a new generation of conveying equipment designed, developed and researched by our company. After the bulk finished products are metered and packaged, they are transported to the corresponding gathering conveyor through the seam bag conveyor. Through the function of bag stacking unit, the whole process of mechanized transportation and stacking of finished products is realized. The whole machine has beautiful appearance, stable operation, simple operation, low failure rate and convenient maintenance. The specific features are as follows:

1. The crane of the stacker can walk along the length direction of the warehouse, and the stacker trolley can walk along the width direction of the warehouse. The sliding trolley can be lifted up and down, and can rotate around the trolley by 270 (the actual rotation angle is 360, and the positioning is 270 when the equipment is actually installed). Therefore, the finished products entering the stacker through the main conveyor can be specified at any point in the whole warehouse. storehouse

2, driving in line with national quality standards, no collapse, trembling, motion jitter phenomenon, no deformation phenomenon after use.

3. The lifting trolley is controlled by Jiangda's exclusive hydraulic brake to avoid the control delay caused by the gravity of the trolley.

4.JDDQ long-span stacker (double beam) is heavy and starts frequently. Jiangda's exclusive starting walking mechanism is specially set, which effectively reduces the instantaneous noise during starting and effectively prolongs the service life of the equipment.

5. The steering structure is specially treated. When the bag passes through the turnover mechanism, it is naturally smooth, and there is no hanging, blocking, detention and other phenomena. The whole conveying line runs stably, safely and reliably.

6. The whole mechanized operation can be completed by electrical control system and computer control system.

7. It is widely used for transportation and stacking of finished product packaging in grain, mining, metallurgy and other industries.