1. First of all, in terms of product trademarks and origins

The Wrigley trademark is the English letters ARROW. Some merchants will modify the details of the trademark, such as adjusting the alphabetical order and using similar words. The letters 'instantly enter' etc.

In addition, Wrigley is a brand under Lehua Sanitary Ware Group. It is headquartered in Foshan, Guangdong. It has production bases in Lecong, Foshan, Sihui, Guangdong, Shaoguan, Guangdong, Jingdezhen, Jiangxi, and Dezhou, Shandong, so it is on the market. The so-called Wrigley brands from other places are not genuine.

2. Look at the craftsmanship

From a product perspective, the main body of the toilet is printed with the brand's trademark before it is fired. It cannot be buckled off or washed off. Obvious concave and convex feeling.

Since all accessories are produced by Wrigley itself, in addition to the main body, all original water parts are printed with English LOGO. Even when you open the water tank, there is Wrigley's trademark on the cover of the water inlet valve inside. There are certificates of conformity and anti-counterfeiting barcodes affixed to the sides and back of the water tank. The model number is printed on the inside of the water tank cover. The anti-counterfeiting details are very good.

The fake Wrigley sanitary ware is not so particular about workmanship and does not pay attention to details.

3. Look at the texture of the glaze

The glaze of Wrigley products is very smooth, delicate, bright in color, and easy to rinse. Compared with other products on the market, the color is whiter and more shiny. It is also smoother, and the wall of the water tank is also very thick. You can tell it by touching it. This appearance and feel are also one of the important ways to distinguish genuine products from fakes.

Extended information:

Pay attention to the following two points to purchase the Wrigley toilet correctly

1. Weight is the key point in judging the quality of a toilet

The heavier the toilet, the better. An ordinary toilet weighs about 50 kilograms, and a good toilet weighs about 100 kilograms. Toilets that are heavier have greater density, and their quality is also relatively acceptable. A simple way to test the weight of the toilet is to pick up the water tank cover with both hands and try its weight.

2. The water outlet is also an important point when we buy a toilet.

There is only one drain hole at the bottom of the toilet. Now many brands have 2-3 drain holes, but the drain holes are The more it will affect the momentum. Bathroom water outlets are divided into down drainage and horizontal drainage. You need to measure the distance from the center of the water outlet to the wall behind the water tank, and buy a toilet of the same model so that you can sit at the right distance. Otherwise, the toilet cannot be installed.

The water outlet of the horizontal drainage toilet should be equal to the height of the horizontal drainage outlet, preferably slightly higher, to ensure smooth flow of sewage. 30 cm is the middle drain toilet: 20 to 25 cm is the rear drain toilet; the distance Those above 40 cm are front flush toilets. If the model is bad, it will not be good in the water.