The practical class hours of subject 2 * * are 16 class hours. As far as C1 and C2 driver's licenses are concerned, the training time of subject 2 is 16 hours and 14 hours respectively. One class hour is one hour, and the training time stipulated by the coach of each driving school is different. ? The examination items of subject 2 include reversing into the warehouse, side parking, fixed-point ramp, right-angle turning and curve driving, and 5 items are required.

there are five items in the examination (five items are common in China, and some areas have added items), including reversing into the warehouse, parking and starting at a fixed point on the ramp, side parking, curve driving and right-angle turning. Out of 1 points, 8 points or more are qualified. According to the basic requirements of class hours, it is allowed to increase the class hours, but it cannot be reduced. Each student's classroom and practical learning time shall not exceed 4 class hours per day.

Choose a reference point for Subject 2

If you want to keep a proper distance between the car body and the right line in fixed-point parking, you must know the position of the right front wheel. Because the driver can't see the right front wheel in the car, he can only find a certain point in the car for reference. For the ordinary Santana car, after sitting in the seat, the ground seen from the middle of the front of the car is probably where the left edge of the right wheel is about to arrive.

some cars have a trademark ornament in the center of the car head, and the root of this ornament just marks the center of the car head. But most cars don't have this ornament on the front of the car. You can stick a piece of colored tape or tape paper in the middle of the front of the car first, and then tear it off after you are proficient. Alternatively, you can choose a reference point at the appropriate position of the wiper and use it instead of the point in the middle of the car.