Auto Parts Sales Contract 4s Store 1 Party A: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Party B: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Through friendly negotiation, Party A and Party B, based on the principle of voluntariness, agree to sell _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
1. Party A shall, from the date of signing this contract. Party A shall mark _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
2. The goods sold by Party A to Party B shall be produced by _ _ _ _ _ _ _ _ _ original factory or cooperative company (accessories shall be designated by Party B).
3. Party B will provide Party A with the required parts according to the list of automobile parts ordered by Party A by telephone, fax, QQ or email.
4. Party B chooses the mode of transportation by itself, entrusts the transportation company to handle the transportation of goods, and pays the transportation fee and insurance premium to the transportation company. Because of the safety of the goods, the goods must be insured.
If there is any problem with the insured goods, Party B shall immediately communicate and coordinate the goods with the transportation company and notify Party A. ..
5. After the acceptance, Party B shall pay the payment for the goods delivered by Party A this month before 10 of the following month. If the payment is overdue, Party A shall pay a penalty of 0.5 ‰ per day. The liquidated damages shall be paid together with the current payment. If the payment is overdue, Party A will stop the delivery to Party B. If the payment and liquidated damages are not paid for more than fifteen days, the performance of this contract will be terminated.
When the performance of this contract is terminated due to Party B's failure to pay for the goods, if Party B has faxed the order for the next batch of goods to Party A before paying for the goods, Party B shall pay a penalty of 30% of the order amount to Party A separately.
7. Any dispute arising from the execution of this contract shall be settled by both parties through consultation. If negotiation fails, either party may bring a lawsuit to the people's court with jurisdiction in the place where this contract is signed.
Eight. The modification of this contract must be made in writing and come into effect after being signed by both parties.
Nine, about the quality assurance issues are as follows:
1. Party A guarantees that the spare parts provided are original accessories and factory auxiliary supplies (within the scope specified by Party B), so all the goods sent by Party A to Party B are certified by Party A's label, and Party A will not recognize those without labels. If Party A is found to confuse the fake with the real, Party A will compensate Party B for the fake.
2. Under the following circumstances, Party A will not return the goods.
(1) Express and futures confirmed by Party B. ..
(2) Party B did not raise any objection on the day of receiving the goods.
(3) Electrical appliances and lamps do not leave home.
(4) Installed, lost or damaged parts in the package will not be returned.
X. Party A's liability for breach of contract
When Party B orders the required goods from Party A, Party A will fax the order to Party B, and Party B will sign for it after reviewing it. If Party A fails to supply the goods to Party B at the agreed time (provided that the manufacturer has the goods), it shall compensate Party B at 0.5 ‰ of the total daily price. Until the goods arrive at Party B. ..
XI。 When signing this agreement, Party B shall provide Party A with a true and valid copy of business license and legal person ID card.
Twelve. For matters not covered in this contract, Party A shall sign a supplementary agreement on the basis of equal consultation between both parties.
This contract shall come into effect as of the date of signature by both parties.
Party A:
Party B:
Address:
Address:
Legal representative:
Authorized Agent: Authorized Agent:
Date of Signing: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Auto Parts Sales Contract 4s Store 2 Buyer: (hereinafter referred to as Party A)
Supplier: (hereinafter referred to as Party B)
Through friendly negotiation, Party A and Party B have reached the following agreement on Party B's provision of spare parts for routine maintenance of Party A's existing buses:
I. Responsibilities and obligations of Party A
1. Party A must list the detailed files of the existing coach car, such as car number, model, engine model and chassis model, and inform Party B in detail, so that Party B can adjust the goods in time and inform the price.
2. At the beginning of the next month, Party A will feed back to Party B the daily use, quality and abnormal phenomena of the accessories purchased last month, so that Party B can contact the manufacturer for replacement.
3. Large items (such as tires and batteries). ) In the assembly, the assembly, pure parts and horizontal products purchased by Party A from Party B shall be marked that Party B will replace them within the warranty period.
4. Spare parts and emergency spare parts required by Party A in case of emergency shall be submitted to Party B together with core parts for stocking before 8: 00 that evening.
5. Party A shall check the purchase list with Party B in the form of monthly statement at the end of each month, and then transfer the payment to the company within 10 days of the following month.
Two. Responsibilities and obligations of Party B
1. Party B shall provide 24-hour service for spare parts required by Party A's existing vehicles, be responsible for delivering them to Party A, and bear all three guarantees for the quality of the spare parts provided.
2. Party B is responsible for providing Party A with the large parts in the assembly, components, pure parts and horizontal products ... and marking them separately for confirmation. Replace it within the scope of the three guarantees stipulated by the state and the three guarantees promised by the manufacturer.
3. Party B shall contact Party A regularly to track the daily use of spare parts sold to Party A to ensure the normal operation of Party A's vehicles.
4. All kinds of spare parts sold by Party B to Party A are settled with Party A at the wholesale market price.
5. At the end of each month, after checking with Party A that the variety, quantity and unit price of spare parts purchased by Party A in that month are correct, Party B will issue a formal invoice to Party A according to tax requirements, and Party A will pay. In addition, the accessories purchased by Party B for emergency maintenance shall be settled at the end of the month with reference to this clause.
6. Party B has the obligation to help Party A purchase emergency spare parts, and is responsible for the quality of three guarantees.
Third, dispute settlement.
1. Matters not covered in this Agreement or unclear provisions shall be settled by both parties through friendly negotiation. Any dispute arising from violation of this Agreement shall be settled through friendly negotiation. If negotiation fails, bring a lawsuit to the people's court under the jurisdiction of Party A. ..
2. Except for the disputed matters, both parties shall continue to perform the rest of this agreement as far as possible.
Four. any other business
1. The term of this agreement is one year, starting from April 20xx? 20xx April? Yes, the supply is overdue. If the contract needs to be renewed, both parties shall negotiate and sign an agreement separately.
2. When signing this agreement, Party B shall provide Party A with a true and valid business license, a copy of legal person ID card and enterprise account information.
3. For matters not covered, Party A shall sign a supplementary agreement on the basis of equal consultation between both parties.
4. This Agreement shall be made in duplicate, one for each party, and shall come into effect after being signed and sealed by both parties.
Party A (seal): Party B (seal): Authorized agent:? Authorized agent:
Tel: Tel:
Date: Date:
Auto Parts Sales Contract 4s Store 3 Party A: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Address: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Postal code: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Phone number: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Fax: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Party B: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Address: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Postal code: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Phone number: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Fax: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Based on the principle of equality and mutual benefit, Party A and Party B agree on _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
Article 1 Agency and scope of authorization
1. 1 Party B sells Party A's series of cars as an agent, including: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
1.2 The agency area of Party B is _ _ _ _ _ _ _ _ _ _ _. Party A authorizes Party B to be the exclusive distributor of the above _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Both parties agree that each vehicle will be fined RMB _ _ _ _ _ _ _ _ _, and at the same time, Party A shall explicitly prohibit authorized dealers in other regions from selling in the above _ _ _ _ _ _ _ _ _ _ _ _.
1.3 party b promises to order no less than _ _ _ _ _ _ cars from party a every month, and party b is responsible for ensuring that the annual sales volume is not less than _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
1.4 The term of Party B's general agent right is _ _ _ _ _ _ _ (from _ _ _ _ _ _ _ _ _ _ _ _ _ _).
1.5 For the sales area represented by Party B, Party B may formulate the sales policy according to the actual situation. In principle, Party A will not interfere, but Party B shall be jointly and severally liable for the distribution behavior of itself and its subordinate distributors.
1.6 "Trademark" is the trademark of automobile products owned by Party A. ..
Article 2 Ordering and Payment
2. 1 The settlement price of Party A and Party B is shown in the annex to this contract, which consists of specific distribution agreement and purchase order and is an integral part of this contract.
2.2 When Party B needs goods, it shall send a written order to Party A. Generally, it shall send an order for the next month to Party A before _ _ _ of each month, and pay off all the car payment before taking delivery.
2.3 Party B is solely responsible for the sales of _ _ _ _ _ _ _ _ _ products in the authorized area. Party B shall sell products according to or with reference to the market guidance price determined by Party A, and it is strictly forbidden to sell products below the lowest market price determined by Party A. ..
2.4 The expenses of various activities organized by Party B for selling _ _ _ _ _ _ _ _ products shall be borne by Party B, but Party A shall actively cooperate and provide technical and personnel support.
2.5 This contract stipulates that payment shall be made by cash or bank acceptance bill.
Article 3 Mode of transportation
According to Party A's requirements, Party B will pick up the goods by itself after going through the relevant outbound procedures and bear the relevant transportation expenses. Party A's warehouse is the place of delivery.
Article 4 Special Provisions in Bidding
When Party B participates in the bidding process, Party A is obliged to issue relevant authorization documents according to the requirements of the tenderee, but Party B must abide by Party A's price regulations as appropriate.
As an annex to this contract, this agreement has the same effect.
Party A (seal): _ _ _ _ Party B (seal): _ _ _ _ _ _
Legal representative or entrusted agent Legal representative or entrusted agent (signature): _ _ _ _ _ _ _ (signature): _ _ _ _ _ _ _ _ _ _ _ _ _
Auto Parts Sales Contract 4s StoreNo. _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
The Buyer _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
The Seller _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
According to (People's Republic of China (PRC) Contract Law), (People's Republic of China (PRC) Product Quality Law) and other relevant laws and regulations, on the basis of voluntariness and equality, the Buyer and the Seller have reached the following agreement on the purchase and sale of auto parts products through consultation:
Article 1 Product name, variety, specification, price and quality
1. Product name, variety, specifications and price _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
() Attach a product purchase and sale list (signed by the legal representative or his entrusted agent or stamped with the official seal of the company, which has the same legal effect as this contract).
2. Technical quality standards of products: (1) according to national standards, (2) according to industry standards and (3) according to production enterprise standards.
If the technical and quality standards of the products are not clear, the standards that can achieve the purpose of the contract and the use of the products shall be implemented.
3. The quality guarantee period is _ _ _ _ _ _ years, starting from _ _ _ _ _ _ _ _.
Article 2 Quantity and unit of measurement of products
The number of products is _ _ _ _ _ _. The unit of measurement of the product is _ _ _ _ _ _ _.
Model auto parts purchase and sale contract
Article 3 Brand
The trademarks of the products supplied by the Seller are: (1) supporting trademarks of the whole vehicle factory, and (2) independent trademarks of the manufacturers. Other agreements _ _ _ _ _ _ _ _ _ _ _ _.
The seller guarantees that the products supplied do not constitute any infringement of industrial property rights and intellectual property rights; The buyer guarantees that the purchased products will not be used for any purpose of infringing industrial property rights and intellectual property rights. Violators should bear all the tort liability caused by this.
Article 4 Product packaging standards and their disposal
1. According to national regulations, the product packages provided by the seller are () wooden cases, () cartons, () bare parts and (). Packaging should be safe, reliable and clearly marked. () The attachment is a packing list.
2. If the product is illegal, broken, damaged or lost due to improper packaging or non-compliance with national regulations or agreement between the two parties, the seller shall be responsible.
3. Others _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
Article 5 Delivery and Risk of Products
1. Delivery method: (1) delivery by the seller, (2) delivery by the seller, (3) delivery by the buyer, and (3) delivery by a third party designated by the buyer.
2. Mode of transportation _ _ _ _ _ _ _ _ _ _ _.
3. The freight burden () shall be borne by the buyer, () shall be borne by the seller, and () other _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
4. Arrival location _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
5. The risk liability of the product is transferred at the time of delivery without special agreement. Product insurance shall be handled by the risk-bearing party and bear the expenses.
6. Other _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
Article 6 Time and time limit for product delivery (delivery)
Product delivery (delivery) time:
() Both parties agree that: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
() The actual delivery date is the date when the carrier issues the waybill for the products entrusted by the seller for delivery or consignment.
() Other _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
Article 7 Product Price and Payment Method
1. The price of the product is _ _ _ _ _ _ _ _ _ _ _.
2. Other expenses _ _ _ _ _ _ _ _ _ _.
3. Payment method: (1) cash on hand, (2) installment payment and (3) payment by (cash), (check), (credit certificate, (credit card) and (3) other means.
4. Payment date: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
The second installment payment is _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Third installment _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
Article 8 Method of product acceptance
1. The buyer's acceptance time for this batch of products is _ _ _ _ _ days from the date of receipt by the buyer.
2. If the buyer finds that the quantity, variety, model, specification, appearance and other observable quality conditions of the products do not conform to the agreement during the acceptance period, he shall properly keep the products and raise a written objection to the seller during the acceptance period. The buyer has the right to refuse to pay for the unqualified products. If the buyer fails to raise a written objection to the seller within the acceptance time, the product acceptance shall be deemed as conforming to the agreement.
3. If the disputed product is lost, the loss is enlarged or the quality is degraded due to the custody of the buyer, the buyer shall bear the corresponding liability for compensation.
4. If the seller fails to deal with the written objection of the buyer within _ _ _ _ _ days after receiving it, it shall be deemed as the buyer's default objection and handling opinion.
5. In view of product characteristics and trading habits, both parties do not adopt the above product acceptance method. Both parties agree that _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
Article 9 Liability for breach of contract
1. If the buyer fails to pay the purchase price or expenses as agreed in this contract:
() Pay liquidated damages at the rate of _ _ _ _ _ _ _ _ _.
() Pay the liquidated damages of RMB _ _ _ _ _ _ yuan to the seller.
() Other _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
2. If the contract is terminated or returned due to the buyer's reasons, the buyer shall pay the seller a penalty of _ _ _ _% of the product price involved.
3. If the seller fails to deliver the goods as agreed or the delivery is delayed due to the buyer's reasons, if the seller meets the following conditions, the buyer shall pay the seller _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
4. If the products provided by the seller have quality problems, they should be exchanged or returned, and bear the actual losses of the buyer. The buyer may require the seller to deal with it according to the "three guarantees" provisions. In case of disputes between the two parties on product quality, they can submit: (expert appraisal by xx Automobile Parts Circulation Industry Association), () manufacturer appraisal, and () other _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
If either party fails to perform this contract within the agreed performance period due to legal force majeure, it shall promptly notify the other party and actively take remedial measures.
Article 10 Dispute settlement methods
Any dispute arising from the performance of this contract shall be settled by both parties through consultation in time. If negotiation fails, you can ask the relevant units for mediation. If mediation fails, the following () methods shall be adopted:
1. Submit to xx Arbitration Commission.
2. Bring a lawsuit to the people's court according to law.
Article 11 Other agreements
____________________________________________
This contract is signed in the form of _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Buyer: _ _ _ _ _ _ _ _ _ _ _ _ _ Seller: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Legal representative: _ _ _ _ _ _ _ _ _ _ _ _ _ _ Legal representative: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Authorized Agent: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Tel: _ _ _ _ _ _ _ _ _ _ Tel: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Contact address: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
Position: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Bank account number: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
Tax number: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.