When we walk on the street, we can often find facilities under construction everywhere, but project construction cannot be invited for bidding casually. You must have certain qualifications for project contracting, otherwise you will not be competent. . So, what qualifications are needed for general project contracting? We have compiled the relevant legal content for you, and you are welcome to read it.

1. What qualifications are required for general project contracting? my country does not have special qualifications for general project contracting. Any enterprise with engineering survey, design or construction general contracting qualifications can engage in construction project general contracting business at the corresponding level within the scope of qualifications in accordance with the law. However, those who undertake general construction contracting business must be enterprises that have obtained general construction contracting qualifications. Engineering survey, design, and construction companies can also form a consortium to carry out joint general contracting of engineering projects. General project contracting refers to the whole process or several stages of contracting by enterprises engaged in general project contracting, entrusted by the owner, to carry out the feasibility study, survey, design, procurement, construction, trial operation (completion acceptance), etc. of the project in accordance with the contract. The general engineering contracting company is fully responsible for the quality, safety, construction period, and cost of the contracted project. The general project contracting model can be divided into two methods: process content and financing operation. 1. EPC model (design, procurement and construction)/turnkey general contracting. Design, procurement and construction general contracting: that is, the combination of design, procurement, and construction means that the general contracting enterprise undertakes the design, procurement, construction, and trial operation of the project in accordance with the contract. It provides services and other work, and is fully responsible for the quality, safety, construction period, and cost of the contracted project. It is the most important general contracting model currently implemented in our country. Turnkey general contracting is an extension of the design, procurement and construction general contracting business and responsibilities, and ultimately submits a project to the owner that meets the functions and conditions for use. 2. E P CM model Design, procurement and construction management The combination of general contracting design, procurement, and construction management is one of the more popular project payment and management models in the international construction market, and it is also one of the general contracting models currently implemented in my country. The EPCM contractor is determined through the owner's entrustment or bidding. The contractor signs a contract directly with the owner and is fully responsible for the design, material and equipment supply, and construction management of the project. According to the investment intention and requirements put forward by the owner, we will select and recommend the most suitable subcontractors for the owner through bidding to complete the design, procurement and construction tasks. The design and procurement subcontractors are responsible for the EPCM contractor, while the construction subcontractors do not sign a contract with the EPCM contractor, but they accept the management of the EPCM contractor. The construction subcontractors have a direct contractual relationship with the owner. Therefore, EPCM contractors do not need to bear construction contract risks and economic risks. When the EPCM general contracting model implements a one-time total quotation method for payment, the economic risks of the EPCM contractor are controlled within a certain range. The economic risks borne by the contractor are relatively small and the profits are relatively stable. 3. Design and construction general contracting (D B) Design-construction general contracting means that the general engineering contracting company undertakes the design and construction of the project in accordance with the contract and is fully responsible for the quality, safety, construction period, and cost of the contracted project. 4. According to the different scales, types and owner requirements of engineering projects, general engineering contracting can also adopt engineering-procurement general contracting (E-P), procurement-construction general contracting (P-C) and other methods.

2. The difference between general engineering contracting and general construction contracting 1. Difference in definition: General engineering contracting refers to the survey and design of engineering projects entrusted by the enterprise engaged in general engineering contracting in accordance with the contract. , procurement, construction, trial operation (completion acceptance), etc., to implement the whole process or several stages of contracting. The general engineering contracting company is fully responsible for the quality, safety, construction period, and cost of the contracted project. General construction contracting means that the construction project contractor outsources all construction tasks to a general construction contractor with corresponding qualifications. 2. The scope of contracting is different. (1) General project contracting: the widest scope of contracting: from project fund management, survey, design, construction (including various projects and various disciplines), requesting construction supervision, handling project completion acceptance procedures, and submitting various project materials. Finally, the keys are handed over to the owner, and the owner is directly responsible.

The owner can entrust another party to do the general contracting of the project, or he can manage it himself and subcontract the project. (2) Construction general contracting: accept investment and construction drawings from the owner or the general project contractor, and be responsible for all sub-items of the entire project; all construction tasks in each specialty are subject to the supervision of the owner and the supervision and quality supervision departments entrusted by the owner. Handle project completion acceptance procedures and submit various project documents. Finally, the key is handed over to the owner, and he is directly responsible for the owner or the general contractor of the project entrusted by the owner. The general construction contracting unit may subcontract some sub-items and sub-professional projects to other construction units, but it must manage and supervise the work quality of the subcontracting unit and be responsible to the owner or the general project contractor for the construction quality of the subcontracting unit. .

3. Project Contracting Contract Sample Project Contracting Contract Sample (Simple) Contract-issuing unit: (hereinafter referred to as Party A) Contractor: (hereinafter referred to as Party B) In accordance with the "Contract Law of the People's Republic of China" and other relevant laws and regulations, following the principles of equality, voluntariness, fairness and good faith, both parties reached consensus on the project contracting matters and signed this contract. Article 1: Project Overview The lakeside slope protection project contracting project is awarded to Party B, and the labor and materials are contracted for construction. The total length of the lakeside slope protection is calculated in meters. Article 2: Construction plan 1. Slope protection (1). The base is meters wide and meters thick. It slowly shrinks from bottom to top to a height of meters. The stressed part requires cold-drawn brick strips, and the outer wall is made of sand (the cement label is 42.5, the bricks should be good quality green bricks or red bricks). (2) Demolish three houses next to the toilet to make way in and out. (3) After completion, make a fence of about 10 meters. (4) The gap between the wall and the bank should be compacted with soil, and an appropriate amount of leaking pipes should be added to the wall. Article 3: Contract Duration 1. The project period is determined by negotiation between the two parties, and is tentatively scheduled to start from day, month, and end on day, month, and year. The specific start time will be determined by Party A’s issuance of a start order before construction can begin. 2. If force majeure occurs during the construction process, or Party A requires Party B to suspend work, the construction period will be postponed accordingly. Article 4: Price and payment method 1. The general contracting price of the project is yuan. 2. The above general contract price is a lump sum price, which includes all the work content of this contract, labor and materials, and all other expenses (including house demolition and fencing). Party A does not need to pay any fees to Party B. 3. Payment method: Yuan will be paid after completion acceptance. In addition to 5% of the total amount of the warranty deposit, the remaining part will be paid. The warranty deposit will be paid in full after one year (the time is calculated from the date of passing the acceptance). Article 5: Obligations of Party A 1. Allocate project funds to Party B according to the contract. 2. Help coordinate temporary water and electricity use at the construction site. Article 6: Obligations of Party B 1. The contractor is responsible for supervising and inspecting the quality, progress, safety, etc. of the project, handling daily related matters, and ensuring the safety and stability of the construction of this project. 2. The contractor must complete the project of this contract by himself and shall not subcontract to others. Article 7: Construction Safety The contractor shall abide by the relevant management regulations on safety production in engineering construction, organize construction in strict accordance with safety standards, and take necessary safety protection measures to eliminate hidden dangers of accidents. Any liability for accidents caused during the construction process and the resulting expenses shall be borne by Party B. Article 8: Acceptance The completion acceptance of the project shall be based on the "Construction Plan" and "Quality Acceptance Standards". If the inspection fails, Party B shall be responsible for free rework. Article 9: Liability for breach of contract 1. Party A shall pay the project payment in a timely manner as stipulated in this contract. If it is overdue, Party A shall pay liquidated damages to Party B (interest shall be calculated based on the bank loan interest rate for the same period on the amount payable). 2. If Party B fails to complete the project on time due to reasons not caused by Party A or force majeure, Party B shall pay Party A a penalty of 1% of the total amount of the project for each day overdue; if the overdue period exceeds ten days, Party A shall Party has the right to unilaterally terminate the contract. Article 10: Others This contract was signed by both parties on the day of year, month, and will come into effect upon signature or seal of both parties. It is made in duplicate, with each person above holding one copy and handing over the copy.

Contract-issuing unit (Party A) (seal) Authorized agent (signature or seal): Contact number: Contractor (signature or seal): Contact number: Year, month, day or above. We will sort out what you need for general project contracting. Legal knowledge related to qualifications. I believe that after reading this, everyone will have a certain understanding of the above content. To contract a project, you must obtain a qualification certificate and a project contracting license, so that you can contract the overall project.