Required materials: colored paper, glue and scissors. Specific steps: 1. Prepare two square colored papers.
2. Fold the colored paper into creases as shown below. 3. Fold according to the crease.
4. Fold into a small square. 5. Turn a corner as shown in the figure.
6. Fold it in. 7. Each side is like this. 8. Fold it in as shown in the figure. 9. Fold it in as shown in each side. 1. Cut it along the yellow line in the figure. 11. Cut it as shown in Figure 12. Take out another piece of paper and cut it along the black line in the figure. 13. Open it. 14. Press the middle down. 15. Glue the red paper. 16. Glue the yellow paper. 17. Rub the colored paper into a paper stick. 18. Cut a small hole at the top and bottom, and pass the paper stick through. 19. Stick a note on it.
2. Apply glue (note: don't apply it on cardboard). 21. Stick a note on it.
it's done with a small umbrella.
How to make an origami umbrella
Method 1: Take three pieces of red paper and staple one corner with a stapler.
fold the paper in half and draw half of the small umbrella on the paper. Cut out the model with scissors.
cut an umbrella handle from the rest of the paper. Sew three models from bottom to top along the center line of the umbrella by single-thread needle return method.
then close the needle at the top, and leave a surplus line to stick the umbrella handle on the umbrella, and then open the small umbrella. In this way, the small umbrella is ready.
take three blank sheets of paper and staple them together. Fold the white paper in half, draw half of the clouds and cut them out.
sew the clouds with thread, and leave the remaining thread, and then spread them into three-dimensional clouds. Make another cloud and several colorful raindrops in the same way.
spread the finished parts and tie them to the hanger at random. In this way, the small umbrella of paper wind chimes is finished.
A complete manual of making small umbrellas
Tools/raw materials
Two square pieces of paper (one large and one small)
One rectangular piece of paper
Making umbrellas
1
As shown in the figure, prepare three pieces of paper. Large square paper is used to make the umbrella cover, and small square and rectangular paper is used to make the umbrella handle.
2
Take a large square paper, fold it in half along the edges, then restore it, and then fold the four corners to the center.
3
As shown in the figure, fold the creases backwards respectively, and then make a mountain fold along one of the diagonal lines.
4
As shown in the figure, fold inward along the crease.
5
As shown in the figure, both sides are folded to the middle, and the back is folded in the same way. The upper triangle is folded down. Note: There are four small triangles * * *, which can be folded by turning to other faces, and the folding method is the same.
6
Open the paper and fold it as shown.
7
As shown in the figure, the bottom corner is folded and restored. The other side is folded in the same way.
8
As shown in the figure, the other diagonal is folded in the same way.
9
After completion, as shown in the figure below.
1
As shown in the figure, make a section fold at the dotted line, and then fold the paper corner downwards. The other paper corner folding methods are the same.
11
As shown in the figure, switch to the double paper corner and repeat step 1. Complete the production of the umbrella cover.
END
making umbrella handle
1
Take small square paper and repeat steps 2-4 of "making umbrella cover".
2
Turn the upper triangle to the right, and then fold it to the upper left as shown.
3
As shown in the figure, fold the top corner of the upper left corner to the top corner of the lower right corner, so that the marked points overlap and flatten the paper. The back folding method is the same.
4
Fold back the protruding part above.
5
Open the paper to complete the manufacture of the "connecting assembly" between the umbrella cover and the umbrella handle.
6
Take rectangular paper and roll it into a thin tube.
7
Cut a small hole in the center of the "connecting assembly" and pass the cylindrical paper through the center to complete the manufacture of the umbrella handle.
A complete manual of small umbrellas
Tools/raw materials: Two square pieces of paper (one large and one small) and one rectangular piece of paper to make an umbrella cover. As shown in the figure, prepare three pieces of paper.
large square paper is used to make the umbrella cover, and small square and rectangular paper is used to make the umbrella handle. 2 take a large square paper, fold it in half along the edge respectively, then restore it, and then fold the four corners to the center point.
3 as shown in the figure, fold the creases backwards respectively, and then make a mountain fold along one of the diagonal lines. 4 Fold inward along the crease as shown in the figure.
5 As shown in the figure, both sides are folded to the middle, and the back is folded in the same way. The upper triangle is folded down.
note: there are four small triangles * * *, which can be folded by flipping to other faces, and the folding method is the same. 6 Open the paper and fold it as shown.
7 as shown in the figure, the bottom corner is folded and then restored. The other side is folded in the same way.
8 as shown in the figure, the other diagonal line is folded in the same way. 9 After completion, as shown in the figure below.
1 as shown in the figure, make a section fold at the dotted line, and then fold the paper corner downwards. The other paper corner folding methods are the same. 11 as shown in the figure, switch to the double-layer paper corner and repeat step 1.
finish making the umbrella cover. END Take small square paper for making umbrella handle 1, and repeat steps 2-4 of "making umbrella cover".
2 turn the upper triangle to the right, and then fold it to the upper left as shown. 3 As shown in the figure, fold the top corner of the upper left corner to the top corner of the lower right corner, so that the marked points overlap and flatten the paper.
the back folding method is the same. 4 Fold back the protruding part above.
5. Open the paper and complete the manufacture of the "connecting assembly" between the umbrella cover and the umbrella handle. 6 Take rectangular paper and roll it into a thin tube.
7 cut a small hole in the center of the "connecting assembly" and pass the cylindrical paper through the center to complete the manufacture of the umbrella handle.
How many types of folding umbrellas are there?
(1) Advantages of the two-fold umbrella: the two-fold umbrella combines the windproof function of the long-handled umbrella, and is easier to carry than the straight-handled umbrella. Many manufacturers develop the two-fold umbrella as a high-grade sunshade umbrella or rain umbrella. Disadvantages of the two-fold umbrella are: when using the umbrella, the ribs should be broken off one by one, which is relatively long and inconvenient to carry.
(2) Tri-fold umbrella has been widely loved by people since it was invented. The advantages of Tri-fold umbrella are small and convenient to use and carry. The disadvantages of Tri-fold umbrella are much worse than those of long-handled umbrella or two-fold umbrella. (3) Advantages of a 5% fold umbrella: it is smaller and easier to carry than a 3% fold umbrella. Disadvantages of a 5% fold umbrella: it is difficult to fold when stored, and the umbrella surface is relatively small.
(4) There are also rare 4-fold and 6-fold umbrellas, 4-fold and 6-fold umbrellas: it is mainly because people on business trips are convenient to carry and relatively small. (5) Advantages of straight handle umbrella: Good windproof effect, especially for straight handle umbrella with more ribs.