1
Blow a hair dryer Find a hair dryer and start blowing hot air at the offset printing position you want to remove, so that these offset printing will soon become soft and sticky, and then you can scrape it off directly.
2
Find a art knife with a knife. Blow clean the oil offset printing clothes with a hair dryer, and then gently scrape the offset printing with a knife. If you are worried about scratching your clothes, just find a small file.
three
After the first two methods of tape are finished, there will definitely be some offset printing on the clothes. At this time, stick the tape on it, press it hard with your fingers and tear it off quickly. These residual offset printing will also be removed.
four
Here comes the electric iron. At this time, the electric iron has made a grand appearance. If the above three methods can't be removed, offset printing will soon be ironed by an electric iron. Remember, iron the reverse side.
Friction: When cleaning the printed T-shirt, rub the pattern part to be removed, and the printing group will naturally fall off with the rubbing action.
Ironing: Use an ironing machine to iron the printed pattern to be removed. Under the action of high temperature, the printed pattern will also fall off.
Banana oil: When cleaning printed T-shirts, drop a few drops of banana oil on the printed pattern you want to remove. During normal cleaning, the printed pattern will fall off.
The Logo print on clothes can be soaked in banana oil and washed with white vinegar.
1. Drop banana oil on the glue stain and keep stirring with an old toothbrush. When the glue stains become soft and fall off, rinse them with clear water and brush them repeatedly until they are clean. Stick absorbent cloth on the back of the clothes with glue marks, then coat some white vinegar on the glue marks, and finally scrub them with cotton dipped in water.
2. Blow it for a while with the hair dryer of the household hair dryer, tear it off when it is soft, and then dip it in baking soda water+dry cloth for cleaning.
3. Wipe it with a paper towel dipped in alcohol (preferably with industrial alcohol, or without medical alcohol), and then rub it a few times to clean it.