Hardware environment: Pentium III CPU or above, memory 128M or above is recommended;
Operating system: Windows 2000 or Windows XP or above;
Browser version: Windows IE 6.0 Windows IE 7.0; Users must prepare the following hardware devices and programs
1) Digital certificate driver: Usb-KeyDriver20111019.rar
2) Digital certificate (KEY) (digital certificate Drivers and security application control programs can be downloaded from the Chinese trademark website);
3) User PC terminal equipment.
1. Before installation, close other applications, such as IE browser, Windows Firewall, 360 anti-virus software, etc.
2. If the KEY driver has been installed on the terminal before, you must uninstall it first and then reinstall the new version (use the automatic uninstallation function of the digital certificate driver to uninstall and restart the computer before reinstalling) .
3. Since this digital certificate driver conflicts with other digital certificate drivers, please check whether there are other digital certificate drivers in the operating system (for example: online banking digital certificate driver, etc.), such as If it already exists, please uninstall, restart and start installing this program.
4. Precautions for verification after installation
The installation process of KEY driver and application control program is very simple. As long as you follow the installation steps correctly, you will be successful. For installation steps, please refer to the relevant content in the "Digital Certificate (KEY) Installation Guide". After installing the digital certificate driver and inserting the digital certificate, the system will prompt:
Use "Device Manager" to check whether the digital certificate driver is installed normally. If not, it will be displayed in 'General The problematic device is marked under 'Serial Bus Controller'. Normally, as shown below, the recognized devices are listed: HID-compliant device.
After installing the digital certificate security application control, there is a newly generated 'Password Control' directory group in 'Start' - 'All Programs'.
After inserting the digital certificate, select the 'Test Tool Application Control' pop-up page.
Click on the active content and select ‘Allow blocked content’, and the following ‘security warning’ prompt will pop up.
Click ‘Yes’, enter the KEY PIN password, and click ‘Login’. The prompt as shown below will pop up for the first time.
Select 'Yes' and a successful login prompt will pop up
The above is a normal installation situation. If the security application control is not installed correctly, the login here will not be successful. After the installation is normal, you can apply online on the China Trademark Network. The default password for the digital certificate is: 123456; Correctly uninstall and reinstall the driver and control:
How to correctly uninstall and reinstall the driver and control ?
If you want to uninstall and reinstall the digital certificate driver and security application control, you can uninstall it through the relevant uninstall options in 'Start' - 'All Programs'.
To uninstall the digital certificate driver, click 'Uninstall'. It is recommended to double-click the digital certificate driver to uninstall as shown in the figure:
To uninstall the security application control, click 'Uninstall' as shown below '
After uninstalling, it is best to use some system cleaning tools (optimization master, etc.) to clean the registry and junk files, and be sure to restart the system. Before reinstalling, close other applications, such as IE browser, Windows Firewall, 360 anti-virus software, etc., and then install the digital certificate driver and security application control.
During the installation process, the digital certificate USB-key cannot be plugged into the computer; at the same time, the control test page cannot be opened.
In the win7 operating system, if you insert the Key into the computer after installation.
You can check it in "Device Manager" to confirm the type of Key. If it is of "WatchData" type (as shown in the picture),
Please follow the steps below to manually Operation:
1) Insert the USB KEY into the computer, open "Computer" - right-click and select - "Device Manager",
2) Right-click "WIN" -FISHNSAF2AP" - click "Scan for hardware changes (A)"
3) After scanning, right-click "Unknown Device" and select "Update Driver Software"
4 ) Click "Browse my computer for driver software (R)",
5) Click: "Select from a list of device drivers on your computer (L)"
6 ) Double-click "Use Serial Bus Controller",
7) Double-click "WatchData USB KeyPro(st)" to install.
8) Click the "Close" button and the installation is successful. As shown in the figure below: and display WatchData USB Key Pro(st) in the universal serial bus controller Note 1:
Security application control does not play its due role in the use of digital certificates (KEY) , but all passed when performing functional tests on application controls.
Answer:
Cause 1: Some files in the system may be damaged. First, determine the installed version of the security application controls. If the installed version is correct, uninstall the installed security application control and then reinstall it.
Cause 2: There are other versions of security application controls on the system. If it exists, please uninstall and then reinstall the currently required version of the security application control.
Note 2:
Digital certificates cannot be used normally, and errors are often reported when testing application controls.
Answer:
Enter the application control test webpage to test whether the data of the digital certificate (KEY) is lost. If the test fails, the digital certificate (KEY) needs to be handed over to the issuing agency for re-issuance.
Note 3:
The security application control is successfully installed, but cannot be used. The system prompts "Key cannot be recognized".
Answer:
You need to make sure you selected the correct driver version and installation path during the installation process. It is recommended to use the default path when installing the driver, and reinstall the driver if necessary.
During the installation process, do not insert the Key into the USB port of the computer. After the installation is complete, please restart the machine.
Note 4:
Several error prompts will appear when entering the PIG code 123456 for official login. This indicates that the digital certificate has not been recognized by the operating system.
Answer:
1. Please check whether the digital certificate is properly inserted into the computer;
2. Please check whether the digital certificate driver is installed successfully ( Check My Computer>Properties>Hardware>Device Manager>WatchDate usbkey in the Universal Serial Bus Manager (there are 4), if the number displayed after plugging in the digital certificate is incorrect, please uninstall the original driver and try again Install. Refer to the content in 4.3 of this article.