In the society where people's legal awareness is increasing, there are more and more occasions where contracts can be used, and contracts are a very important factor in the development of enterprises. I believe everyone is worried about writing another contract. Here are five sales contracts for doors and windows that I have carefully sorted out (selected), hoping to help you.
Door and Window Sales Agreement 1 Supplier: _ _ _ _ _ _ _
Demand side: _ _ _ _ _ _
Signing place:
Signing time:?
1. Product name, trademark, model, manufacturer, quantity, amount, delivery time and quantity: product specification, unit quantity, unit price, total amount, delivery time and quantity?
Total?
Total amount of RMB (in words)
Two, the quality requirements and technical standards, the conditions and time limit for the supplier to be responsible for the quality.
Three. Place and method of delivery (delivery)
Four, the mode of transportation and arrival at the port and the cost burden.
Five, reasonable loss and calculation method
Six, packaging standards, packaging supply and recycling
Seven. Acceptance criteria, methods and time limit for raising objections. Quantity and supply mode of random spare parts, accessories and tools
Nine. Settlement method and time limit
Ten, if you need to provide a guarantee, a separate contract guarantee, as an annex to this contract.
XI。 responsibility for breach of contract
Twelve. Ways to resolve contract disputes: Any disputes arising during the execution of this contract shall be settled by both parties through consultation. If negotiation fails, both parties agree to arbitrate by Changzhou Arbitration Commission (if both parties have not agreed on an arbitration institution in this contract and have not reached a written arbitration agreement afterwards, they may bring a lawsuit to the people's court).
Thirteen. Other agreed matters.
The seal of the supplier and the seal of the buyer.
Signature of legal representative or entrusted agent
Bank of deposit: Bank of deposit:
Account number: Account number:
Address: Address:
Postal code:
Telegraph registration: telegraph registration:
Tel: Tel: Beijing? Do it. Personnel:
Identity (Public) Certification Body (Seal)
Door and window sale agreement 2
Seller: (Party A) _ _ _ _ _ _ _ Coal Company
Buyer: (Party B) _ _ _ _ _ _ _ _ _ _ _
1. Name, destination, specifications, quality, delivery time and quantity of the consignee.
Consignee's name: _ _ _ _ _ _ _ _ _ _ _ _ _
Originating station: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Arrival time: _ _ _ _ _ _ _ _ _ _ _ _ _
Variety specification: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Quality: _ _ _ _ _ _ _ _ _ _ _ _ _
Delivery (delivery) time: _ _ _ _ _ _ _ _ _ _ _ _
Quantity (ton): _ _ _ _ _ _ _ _ _ _ _ _
Total for the whole year: _ _ _ _ _ _ _ _ _ _ _ _
Section 1: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Section II: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Section III: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Section IV: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Total moisture
2. Delivery (pick-up) method: delivery is made on the pallet of the departure station.
3. Quality and quantity acceptance criteria and methods: the quality is the same as above, and the quantity is subject to the railway receipt.
Four. Unit price of coal and implementation period: the car board price is _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
Verb (abbreviation of verb), method and time limit for settlement of transportation and miscellaneous fees: after signing this contract, Party B shall pay a deposit of RMB _ _ _ _ _ _ _ _ _. After the scheme is passed, Party B will remit all the payment to Party A's account, and Party A will start renting a car. If the goods cannot be delivered due to Party A's reasons, Party A shall promptly return the payment to Party B; If the deposit cannot be shipped due to Party B's reasons, the deposit shall be owned by Party A, and the interest shall be borne by Party B when it is paid by acceptance bill.
Liability for breach of contract of intransitive verbs: application of contract law. However, the contract cannot be performed due to railway transportation and force majeure.
Seven. Ways to resolve contract disputes: through negotiation; If negotiation fails, the people's court of the observant party shall make a ruling.
Eight. Other agreed matters: This contract shall come into effect after being sealed by both parties. The validity period is _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
Seller: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Seller's name (seal): _ _ _ _ _ _ _
Legal Representative: _ _ _ _ _ _ _ _ _
Authorized Agent: _ _ _ _ _ _ _ _
Tel: _ _ _ _ _ _ _ _ _ _ _
Fax: _ _ _ _ _ _ _ _ _ _ _
Bank of deposit: _ _ _ _ _ _ _ _ _ _ _
Company address: _ _ _ _ _ _ _ _ _ _ _
Postal code: _ _ _ _ _ _ _ _
Taxpayer registration number: _ _ _ _ _ _
Buyer: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Name of the Buyer (seal): _ _ _ _ _
Legal Representative: _ _ _ _ _ _ _ _ _
Authorized Agent: _ _ _ _ _ _ _ _ _ _
Tel: _ _ _ _ _ _ _ _ _ _ _
Fax: _ _ _ _ _ _ _ _ _ _ _
Bank of deposit: _ _ _ _ _ _ _ _ _ _ _
Company address: _ _ _ _ _ _ _ _ _ _ _
Postal code: _ _ _ _ _ _ _ _
Taxpayer registration number: _ _ _ _ _ _
Appraisal opinion: _ _ _ _ _ _ _
Handler: _ _ _ _ _ _ _ _ _ _ _ _
Certification body (seal) _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
(Note: Unless otherwise stipulated by the state, certification (public certificate) is voluntary. )
Producer: State Administration for Industry and Commerce
Door and window sale agreement 3
Demander: (hereinafter referred to as Party A)
Supplier: (hereinafter referred to as Party B)
Party A hereby entrusts Party B to process, manufacture and install the engineering security door and fire-proof security door, and Party B will undertake the construction. In order to clarify the responsibilities and obligations of both parties, this agreement is hereby concluded for * * * to abide by.
I. Project name:
Second, the scope of contracting:
Responsible for the manufacture and installation of security doors.
Three, security doors and fire doors engineering costs
Fourth, the product and installation quality
1. The product acceptance is subject to the quality acceptance of the samples provided by the supplier and the installation samples. The warranty period of product quality is one year, counting from the date of completion and acceptance of this project (except for human factors).
2. The quality of Party B's products is as follows:
① The materials used for the quality of Party B's products must meet the agreed conditions, and the configuration of locks and spare parts should meet the requirements of the buyer. Before installation, the qualification certificates of relevant departments should be issued to Party A for the record.
(2) The installation quality must meet the requirements of the current national quality acceptance standards.
(3) If the project quality and products are unqualified, Party B must unconditionally rework or return them, and Party B shall be responsible for the materials and other losses arising therefrom.
Verb (abbreviation for verb) delivery time and requirements
1. Party B's installation time shall conform to Party A's construction plan and deliver the door to the construction site.
2. Party B shall recycle the product packaging materials by itself.
The responsibilities of intransitive verbs Party A and Party B:
1. Provide Party B with the construction site and water and electricity needed for construction.
2. Party A is responsible for painting and grouting.
Party B's responsibilities:
1. Accept the management of Party A and clean up the site according to Party A's requirements for safe, civilized and standardized construction.
2. Install tools, measuring tools, materials and workers' daily necessities at their own expense.
3. Be responsible for the finished product protection in the construction process before the installation of this project is completed.
4. Party B shall be responsible for the safe construction of construction personnel, and Party B shall be responsible for any safety accidents.
Seven, acceptance criteria, methods and time limit for raising objections.
The quality acceptance of the model door and the items approved by both parties shall prevail. After Party B completes the installation, Party A will organize the acceptance. No quality objection is raised within 15 days after the completion acceptance, and the product quality is considered as qualified. (Remarks: This product is not responsible for packaging acceptance, but is responsible for providing valid certificates and qualified products. )
Eight. terms of payment
1. The down payment shall be paid on the effective date of signing the contract, after the products arrive at the construction site, after the internal acceptance of installation is completed, and the balance shall be paid in one lump sum within three months.
2. The project payment shall be paid by Party A to Party B by remittance according to the official invoice amount of Party B for settlement.
Nine. responsibility for breach of contract
1. If Party B fails to fulfill the obligation of supply or installation as required by Party A, Party A has the right to refuse to pay the payment for goods to Party B, and require Party B to pay liquidated damages 500 yuan for each breach.
2. If Party A fails to pay on time, Party B has the right to require Party A to pay 0.2% of the payable amount as liquidated damages.
3. Any dispute between Party A and Party B during the execution of the contract shall be settled through friendly negotiation. If negotiation fails, both parties may apply to the local people's court for a ruling.
X. Other agreed matters
After Party B completes the contract delivery and passes the buyer's acceptance, but before receiving all the money agreed in the contract, Party B continues to own the delivered products. During this period, the supplier will not provide after-sales service.
XI。 This contract is made in duplicate, one for each party, and shall come into effect after being signed and sealed by both parties. After the contract project payment is paid in full, it will automatically become invalid.
Party A (official seal): _ _ _ _ _ _
Party B (official seal): _ _ _ _ _ _
Legal representative (signature): _ _ _ _ _ _
Legal representative (signature): _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Door and window sale agreement 4
Supplier: _ _ _ _ _ _ ContractNo.:
Buyer: _ _ _ _ _ _ Signing place: Changzhou, Jiangsu.
Signature time:
1. Product name, trademark, model, manufacturer, quantity, amount, delivery time and quantity:
Product specification, size, unit quantity, unit price, total amount, delivery time and quantity
total
Total amount of RMB (in words)
Two, the quality requirements and technical standards, the conditions and time limit for the supplier to be responsible for the quality.
Three. Place and method of delivery (delivery)
Four, the mode of transportation and arrival at the port and the cost burden.
Five, reasonable loss and calculation method
Six, packaging standards, packaging supply and recycling
Seven, acceptance criteria, methods and time limit for raising objections.
Eight, random spare parts, accessories and tools quantity and supply mode
Nine. Settlement method and time limit
Ten, if you need to provide a guarantee, a separate contract guarantee, as an annex to this contract.
XI。 responsibility for breach of contract
Twelve. Ways to resolve contract disputes: Any disputes arising during the execution of this contract shall be settled by both parties through consultation. If negotiation fails, both parties agree to arbitrate by Changzhou Arbitration Commission (if both parties have not agreed on an arbitration institution in this contract and have not reached a written arbitration agreement afterwards, they may bring a lawsuit to the people's court).
Thirteen. Other agreed matters.
provider
Name of unit (seal)
Unit address:
Legal representative:
Entrusted agent:
Telephone message:
Telegraph registration:
Bank of deposit:
Account number:
Postal code: demander
Name of unit (seal)
Unit address:
Legal representative:
Entrusted agent:
Telephone message:
Telegraph registration:
Bank of deposit:
Account number:
Postal code: certificate (public certificate) comments:
Agent:
Certification body (seal)
date month year
(Note: Unless otherwise stipulated by the state, certification (public certificate) is voluntary. )
Validity period: year month day to year month day.
Door and window sale agreement
Demander: _ _ _ _ _ _ _ _ _ _ _ _ _ _ (hereinafter referred to as Party A)
Supplier: _ _ _ _ _ _ _ _ _ _ _ _ _ (hereinafter referred to as Party B)
Article 1 Commodity name
Please read the following contents carefully and confirm the brand, specification, model, color and quantity of the goods you choose before signing. If you have any questions, please ask them in person to avoid disputes. (Unit: _ _ _ _ _ _/Yuan)
Article 2 Quality standards
《________》
Article 3 delivery
(Delivery) Time: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Article 4 Replenishment:
Within _ _ _ days after delivery, the same batch of bricks will be provided to the buyer for the first time free of charge, and the buyer's freight will be charged for more than _ _ _ times, with cash on delivery.
Article 5 Payment Method and Time
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
When signing this contract, the buyer has no advance payment, and will pay the balance in one lump sum within _ _ days after the acceptance of the goods;
Article 6 Liability for breach of contract
(1) If one party delays delivery or delivery, it shall pay% of the delayed price to the other party as liquidated damages for each day of delay;
(2) If the seller fails to make payment on the second day after receiving the goods, the seller has the right to tow away the goods without returning the buyer's deposit.
(3) If the buyer unilaterally terminates the contract without justifiable reasons, it shall compensate the seller for the losses suffered as a result, and the paid deposit has no right to demand the return.
Article 7 Method of dispute settlement
Disputes arising under this contract shall be settled by both parties through consultation, or apply to the market organizer or consumer association for mediation, or appeal to the administrative organ; If negotiation, mediation or appeal cannot be settled, a lawsuit or application for arbitration shall be filed in a court in accordance with the arbitration clause or arbitration agreement reached separately.
Article 8 Other agreed matters
Article 9 Both parties may modify or supplement this contract in written form, but if the modification or supplement unreasonably reduces or exempts the responsibilities of the seller under this contract, this contract shall continue to be implemented.
Party A (signature): _ _ _ _ _ _ _ _ _ _ _
Party B (signature): _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _