Question 1: How to add ink to the color ink tank of HP printer? For most HP ink cartridges (such as 817, 6656, 816, 28, etc.), you can see the ink filling hole by removing the label on the top of the cartridge, but there are also individual models (such as 51, 45, etc.) that have ink filling underneath.

Question 2: How to add ink to Canon printer color ink cartridges? Buy a set of special ink for Canon printers, four colors of CMYK, use the drill bit provided to enlarge the pores visible on the ink cartridge after peeling off the label, and then it can be recharged. There is one black hole and three colored holes. The top is red, the left is blue, and the right is yellow. If you are afraid of making a mistake, insert a toothpick into the hole to see which color it is, and then add about 5ml. Finally wrap it with tape and it’s OK.

Question 3: How to refill ink for a color inkjet printer. If you need the ink refilling method for various types of ink cartridges with pictures and text, please contact me and I will provide it free of charge.

The above is for reference only. It is hard to type. If it can help you, please adopt it and give some points.

If you have any other questions, you can come to me at any time, I am happy to help you, please note my name:) - you can find me at any time.

Ink refilling method:

Canon PIXMA-IP1180, IP1200, IP1600, IP1880, IP2200, IP2580, IP6210D, IP6220D, MP140, MP145, MP150, MP160, MP170, MP180, MP450 , MP460, MX308, MX318, etc. all use PG-40, CL-41 (or PG-50/CL-51, PG-830/CL-831, the ink refilling method is the same) ink cartridges, you can follow the following ink refilling method .

1. For the black ink cartridge, there is a hole after lifting the sticker on it.

2. For color ink cartridges, there are three holes after lifting the sticker.

3. Use a small drill to enlarge the ink filling hole, whichever can fit the needle tube. We will provide you with a small drill.

4. Add 6-8ML each time for black and about 3-4ML each time for color. Please be careful not to cross colors.

5. Please control your strength when drilling. The hole is not particularly easy to drill, but when you really need to drill, don't use too much force.

6. Please try not to touch the ink cartridge chip and nozzle when drilling or adding ink.

Note: Do not add ink too quickly to avoid overflow. In addition, the amount should be moderate. If you add too much ink, it will not only cause ink leakage, but also the overflowing ink is likely to wet the machine parts, affecting the appearance. . If you add too much ink, lightly dip the ink cartridge and print head with a soft tissue to absorb the excess ink.

There is a sponge inside the ink cartridge. After adding ink, please leave it for 1 hour before printing to allow the ink to fully rinse. It is best to use the printer's own cleaning program to clean it 2-3 times before printing.

Picture description of the ink refilling steps:

1. Follow the correct steps to take out the ink cartridge

Picture

2. Lift the label on the ink cartridge , exposing the ink filling hole

Picture

3. Use a tool to expand the ink filling hole, and add ink according to the color. If there is any ink remaining in the earthworm-like groove, please use a paper towel to absorb it. Clean

Picture

4. Put the label back as it is, install it on the printer, leave it for 1 hour and then print the test

Be careful not to cover the air guide hole. In addition, if there is any ink left in the earthworm-like groove, please use a tissue to absorb it, otherwise you will not be able to print.

Picture

Carbon-zero technology raw ink allows your printer to receive meticulous care

What is "carbon-zero" technology: a German technology, developed by Germany Scientist Professor Aierson first proposed that it allows the ink to pass through multiple layers of filtration instead of the currently common three-stage filtration technology, and uses a unique chemical method to increase the solubility of the solute itself, successfully reducing the size of the solid particles of the ink. Controlled below 0.1μm, its fineness approaches zero.

This means that the color base is basically completely dissolved in the solvent, which can more effectively avoid the phenomenon of "clogging" of the printer ink cartridge during use, while making the printing effect clearer and more realistic, and the color reproduction performance is excellent.

Question 4: How to add color ink to a color printer. There are three small holes on it, the size of a needle tip. You need to find a small drill to enlarge the hole. The one on the top is red, the one on the left is blue, and the one on the right is yellow. It is recommended to switch to continuous ink supply for this machine. This machine has been modified to have a continuous supply of ink cartridges with a very long life, and even if the quantity is small, it can be used for three or four years without any problems.

Question 5: How to add ink to HP color inkjet printer? You need to buy 3 kinds of ink. You need to tear off the trademark on the ink cartridge first, and then add the corresponding color. If you can’t see it, If you know what color it is, you can take a toothpick and insert it into the hole first. Just add the color you can see clearly. Also, pay special attention to the fact that the ink cartridge is relatively small. If you add color ink, be sure to add less. If you add too much, it is easy to leak ink and burn the ink cartridge!

Question 6: How to add ink to HP 1112 color inkjet printer? You can use a syringe to add ink. After tearing off the standard paper, you can see 5 holes, the black one is in the middle; the color one is at the top. It is red, the upper left is yellow, and the upper right is blue.

Question 7: How to add ink to an Epson color inkjet printer? Epson inkjet printers cannot use a single ink cartridge (it does not matter whether your ink cartridge actually contains ink, as long as the ink cartridge counting chip still has ink display)

It’s very simple to just print black

Find your printer icon in the fax machine printer, select "Advanced"--"Continue" in the printing preferences, and then click on the left Just tick the grayscale on the middle side and that’s it!

Question 8: Canon MP236 printer, the color one has three holes, how to add colored ink, how to add the red on the top, the blue on the left, and the yellow on the right, use a drill bit not exceeding 3.5 mm to remove the ink cartridge itself When drilling the original hole, do not use too much force during the drilling process, even if you clean up the debris generated during the drilling process. Then use a syringe to extract the ink and add the matching ink separately. Do not add too much ink at one time. Generally, each color is about 3ml. Don’t add it too fast. It is best to prepare paper towels. If there is ink overflow, wipe it in time to avoid flowing to other holes and causing color mixing. After adding, follow the label on the original ink cartridge according to the original color. There is a place to post it back.

Question 9: How to refill HP original color ink cartridges and what should I pay attention to? Regardless of color or black, it is not recommended that you add ink yourself before using it. Adding ink is very troublesome, especially for colored ones. If you accidentally overflow the ink, the colors will be mixed. Moreover, most of the inks nowadays are fake. Not to mention the poor material, it is easy to clog the nozzle, and the printing effect is subpar. , so it is recommended that you still use the original box, the quality is guaranteed, the effect is the best, and it will not damage the printer.

Question 10: How to add ink to HP printer? It is recommended that you do not add colors because it has three modules, which are the three primary colors of red, yellow and blue. If you add the wrong one, the colors will be mixed when typing. How can I be satisfied?