Killer trick, PUMA Puma shoes are different, the biggest feature is that she has anti-counterfeiting labels, which are sent to its designated factories from Puma Germany. Each label corresponds to a pair of shoes, and as many as you place orders, the labels are marked with four colors: black, red, blue and green. Different combinations represent different countries and regions, with watermarks and silver lines. Similarly, try to identify PUMA's clothes. Authentic clothes also have four-color anti-counterfeiting labels, while imitations don't.
puma PUMA's puma shoes are most concerned about his logo. There are two signs of Puma. One is the familiar leopard, which is usually embroidered by electricity. Authentic leopards are smooth and robust, and they are lifelike in a running posture. And fake shoes are generally embroidered like dogs, either too thin or too fat, and embroidered in Mao Mao, sometimes a bit like hedgehogs; The second is the side strip, which is called ham. His three-part requirement is very strict. The three-part requirement must be very uniform, and the side strip is very smooth, straight and symmetrical. The uneven side strip is generally B-quality, but it is difficult to do this if it is fake.
PUMA's workmanship is very particular, with uniform sewing machine margin of 1.5MM, double needle spacing of 1.2MM, and needle spacing of 9 stitches per inch. There will be no money breakage, thread floating and needle skipping. Employees who are genuine products have to be trained for half a year before they can take up their posts. And fake puma puma shoes can't do it.
the materials of puma puma shoes are inspected, and no bad materials will be used, so there are no signs of bad materials on the shoes, such as broken materials, long hair, burrs and color difference. PUMA shoes are generally made of PU leather. The genuine shoes require foam to stick 3MM high to make the shoes smooth. Generally, the fake shoes are smooth and the foam falls off.
puma PUMA shoes have strict control over the glue opening. Every batch of shoes has a test tension, which is required to be 6KG/CM, while NIKE's tension is only 3KG/CM, so Puma shoes are generally durable, and there is no glue line, which pollutes the vamp. Fake can't do this.
materials of puma puma shoes have been tested for yellow resistance, and the vamps generally do not turn yellow. If they do, they may be fake shoes.
PUMA's outsole, generally the outsole of sports shoes and casual shoes, is made of rubber. If you press it with your fingers, it will immediately change back to its original state, which is true. If you press it down, it won't get up, it will be fake. There is also the fact that the outsole of puma puma shoes has been wet-aged, and there is no possibility of frosting on the outsole, that is, the black outsole will become white, and if you wipe it with your hands, it will become whiter and whiter.
PUMA puma shoe last is very close to the foot. When you wear puma shoes, you feel that all aspects of the contact between shoes and feet are stressed the same, and every place is very close to the foot, unlike NIKE shoes, there are several kinds, some are loose and some are tight. PUMA's is the same, so what doesn't match this feeling may be fake.
puma Puma shoes are made by climbing all sides. The shoes made in this way will not wrinkle inside, nor will they hurt feet, nor will the uppers wrinkle, nor will they deform and be unstable on the table. If there is a wrinkle or deformation, it must be fake.
puma Puma's toe joint tongue is a half-moon sewing line, which is computer-driven. The heavy needle of this sewing line is in the original position and will never look rough. The eyelets are generally placed vertically in the middle, and will not be biased or skewed. If not, they are fake.
= = = = = = =
Identification of authenticity
Adidas sports series-the authenticity of three bars is very easy to identify! The most obvious thing is to look at the embroidery and hot stamping signs on clothes or trousers. The dots on the I letter in adidas are really connected with the three bar signs on the top, while the fakes are all separated! There are also genuine products, and the embroidery of adidas is very clear. If there are threads and they are connected together, then you can buy fakes! Of course, the most important thing is to look at the tag and workmanship, as well as packaging! Generally, there are two small labels inside genuine clothes, one is the fabric and origin and washing instructions, and the other is the item number! The workmanship on the outside is very good, and the workmanship on the inside is also good, and there won't be many threads! There are also tags that are generally black, of course, the printed fonts are very clear; Special note: the original series, that is, the clover retro series, is generally blue! One more thing to add: Generally, the standard of genuine Adineri not only writes the size, such as M L XL, but also writes the height, such as: top 185/14A
This is some details of Adi's three bars-－Performance
1. Fabric
ADIDAS' summer dress, from the perspective of fabric, Mainly ClimaCool and ClimaLite
ClimaCool keep cool and comfortable for a long time. Climacool has excellent ventilation and temperature regulation functions, which can make the air circulate, accelerate sweat discharge, avoid clothes sticking to your body and keep you dry.
ClimaLite's lightweight, breathable fabric, which is close to the skin surface, can take heat and sweat away from your body and keep you cool and dry even in the hottest conditions. It also provides UV sun protection function to filter out harmful components in the sun.
CLIMALITE and CLIMACOOL have similar functions, both of which are rapid perspiration systems. However, the fiber structure of the two is not the same. I feel that CLIMACOOL uses finer fibers, so it is tougher and softer than LIMALITE. So some players' jerseys are made of CLIMACOOL, while fans' jerseys are CLIMALITE.
☆ identification method: authentic fabrics are always soft and tough, and the texture is very detailed. In fact, the feeling is hard to describe. You will know when you have a chance to feel it. It is also possible to test the perspiration effect by testing the fabric.
2. Main logo/washing logo/tag /ID logo
Main logo
At present, most ADIDAS clothes with functional fabrics use offset printing as the main logo. Just carefully observe the smoothness and clarity of the main logo. If it is the version of the specified region, only the size of the specified region will be marked on it. If it is a multinational version, it will be marked with eight countries.
washing label (i.e. washing and ingredient description at a height of 1CM from the foot of the shirt on the left side of the clothes)
1. The most common one: front and back, with the national flag of eight countries on the front, ingredient description and washing description in the sales country text on the back, and the factory code will be marked below. (consistent with the ID label)
2. The washing label of the version sold only in Europe: one * * is three pages, without the national flag of eight countries, and the description of ingredients and washing instructions are in (Germany, Britain, France, Spain, Portugal, Italy, Netherlands, Greece, Denmark, Sweden, Finland, Russia, Czech Republic, Poland, Hungary). It shows the company address of ADIDAS in the Netherlands: Adidas International Trading B.V, and the factory code will be marked below.
3. washing label of the specified version in Europe (sold in the specified country): here is a single sheet for Spain, with only one page. The description of size/origin/ingredients and washing instructions are expressed in Spanish, without factory code.
☆ Identification method: Look at the material of washing label. Authentic materials are smooth and silky, with clear printing and smooth edges. Most water washes will be marked with the factory code at the bottom of the last page. Please compare it with the factory code marked on the ID, and the two should be consistent.
Tag
AD's tag color and paper requirements are very strict. Generally, a piece of clothing needs 2-4 tags strung together, depending on what style it is. At least there must be two. One is the main tag, usually black. There is also a certificate. There's a money number on it or something. It's very detailed. And if it is a special fabric, he will have a separate tag to explain it. They all use strict uniform color numbers and fonts to print, and the paper is also very good and scratch! There will be no wrinkles!
the three slashes on the trademark are connected with the upper corners of the two d's, and the genuine embroidery is more delicate, without thread ends, and the spacing is proportional. (However, some anti-edition people have noticed this.)
The three lines on the clothes with trademark significance are fine in workmanship and well-proportioned in size. Moreover, the distance between the three lines is consistent with the size of the lines themselves. The number of stitches between one inch is about 1 stitches. This is the foundation of foreign inspection.
the following information can be read from the bar code label on the tag
1. Product name, color and article number
The article number will be marked in the upper right corner of the bar code label (which should be consistent with the article number on the ID label), and the product name and color will be displayed on the left
2. Eight-country size
Eight-country size is marked below the bar code label
ID label
ADIDAS each different style of clothes has a different ID.
three rows of information are displayed on the p>ID label.
A row of six digits indicates the product number.
A row of two letters plus four digits indicates the factory code (or six digits).
A row of four digits indicates the date of manufacture: expressed in month/year.
The three rows of information will have some changes depending on the product version.
1. * * Version: From top to bottom, it is the product number, factory code and production date
3. European version: the production date, product number and factory code are on the front, and the anti-counterfeiting bar code is on the back
3. Other details
mainly look at the LOGO and zipper
1. The LOGO of adidas: the logo of offset printing is smooth and smooth, very delicate. If it is embroidery, there is no line between letters, only two letters D and one point at the top of the letter I are connected with three slashes.
2. Zippers: provided by the famous zipper production company "YKK", so YKK English letters can be found on zipper locks with zippers.
If you have a zipper, you should look at it. The zipper used in AD is provided by YKK, a world-class manufacturer, with the word YKK on the back and adidas on the front.
write down some shoes, not many, sorry ...
adidas shoes, AD shoes-first, see the size area below the origin of the shoe label, there is a JP at the end of this line, and the following line should correspond to the length unit of this shoe in millimeters. Look at the numbers below this number. The key point is that the last number in the third line should be aligned with the third last number in the second line. This number should be. Most of the misaligned ones are fake.
Also, the sizes of AD are marked like this: the cardinal numbers are all integers followed by 1/3, and you can't just write integers. For example, if you write 41 yards, you won't write 41, but if you write 41 1/3 43, you won't write 43, you can write 43 1/3. If you write even numbers, you can write integers, and if you have scores, you will definitely write 2/3, but you won't. For example, size 42, size 42/3, size 44, size 44 2/3, that is to say, the size of AD is calculated by adding 2/3, otherwise it must be fake.
Fake point 1: The adidas classic series clover logo on the tongue of the shoe, please pay attention to a small black dot on the upper right of the shoe. If you are not mistaken, you should add an R and a circle. The genuine product will never have this usual logo.
counterfeit point 2: adidas letters on the side and back of shoes are obviously unevenly spaced. Adi's shoes are expensive, but there is no problem with his workmanship. Generally, the letters are clearly marked and evenly spaced.
Note: There are usually three types of Adi series. One is the common three-bar logo in the market, which can be said to be the symbol of Adi's modern style. The second is the classic series, which is the clover logo. This series is not made by agents in Xiamen. Because of its retro style and relatively small acceptance, it is generally sold in large and medium-sized cities, and can be bought in Beijing, Shanghai, Guangzhou, Chengdu, Kunming and other cities. The third is the Y-3 series, which is the same brand of Adi and another company. It belongs to casual clothing and is very modern, but the price is also "modern". At present, only two stores in Shanghai in mainland China sell it.
Therefore, Adi's clover logo and the small print of three bars plus adidas appear on a pair of shoes at the same time. At present, there is no genuine product that has done this. As a result, this pair of shoes is extremely easy to identify, and everyone can use the logo as the simplest way to identify when buying.
Counterfeiting point 3: Product labels. Adi's current labels are black and white, and no other colors appear. The product labels in the picture are obviously green, black and white, which shows that counterfeit manufacturers are really careless.
counterfeit point 4: adidas intaglio marks on the front face of shoes, it can be clearly seen that the letter imprint marks are different in depth, and Adi's shoes are strictly inspected before leaving the factory, so the products produced in this way have long been eliminated.
Fake point 5: shoelaces ... Hehe, some people say how to tell shoelaces. A pair of shoes with high price will pay attention to the quality of shoelaces and the workmanship of shoelaces holes. The shoelaces are at least solid and durable, and are not prone to pilling and deformation. The size of shoeholes is the same. Usually, 1-3 rows will be reserved at the end of shoeholes for users to choose to pierce according to their foot types. ...