Low-carbon coatings refer to reducing the use of petrochemical energy, improving energy efficiency and reducing carbon dioxide emissions in the whole life cycle of coating raw materials and equipment manufacturing and coating use. At present, environmental protection coatings have gradually become the mainstream trend in the international coatings industry. On the road of developing environmental protection, "energy saving" and "low carbon" of coatings will inevitably become an unavoidable topic.

As one of the top ten brands in the world, Germany Yating Coatings has always been a pioneer in environmental protection, energy saving and emission reduction. In the context of the growing global voice of "low carbon", the series of "low carbon coatings" initiated by "Yating" was grandly listed, adding a beautiful landscape to the architectural coatings industry.

brief introduction

Low-carbon coatings refer to reducing the use of petrochemical resources, improving energy efficiency and reducing carbon dioxide emissions in the whole life cycle of coating raw materials and equipment manufacturing and coating use.

Developed countries, such as Europe and America, are actively promoting the environmental protection housing project, and comprehensively utilizing the environmental protection technology of water-based paint to meet the intelligent requirements of future smart housing in terms of heat insulation, lighting, air purification and self-cleaning. This has become a reality in Austria, Germany and other countries.

In China, the concept of low-carbon life has been paid more and more attention and written into the national development plan. In fact, as early as 2007, China put forward the "Eleventh Five-Year Plan" for energy development, clearly stating that by 20 10, the energy consumption per unit of GDP will be 20% lower than that in 2006. Of course, the development of low-carbon living coatings in China needs a set of practical and operable standards in line with China, and also needs corresponding policy support.

background

With the continuous growth of global population and economic scale, the environmental problems caused by energy use and their causes have been continuously recognized by people, not only the harm of smog, photochemical smog and acid rain, but also the global climate change caused by the increase of carbon dioxide (CO2) concentration in the atmosphere has been recognized as an indisputable fact. Global warming poses a severe challenge to human survival and development.

Specific to the coating industry, it is a big energy consumer. In the production process of coating products, energy sources such as production, ventilation and lighting are all involved, and the carbon emission is very large. Moreover, many production enterprises continue to use old equipment for open-air operations, and harmful gas emissions are more serious. Therefore, realizing energy-saving technological innovation as soon as possible, establishing a low-carbon emission system for buildings, paying attention to every link in the construction process, effectively controlling and reducing carbon emissions, and forming a sustainable development model are the only way for the healthy development of China coatings industry and the unshirkable responsibility of developers. Finally, this is the only way for the coatings industry to achieve healthy development.

The development of low-carbon economy has been paid more and more attention, and will become a new bright spot of economic growth in China and even the world. With people's knowledge and understanding of low-carbon economy, projects without green and low-carbon content may be eliminated by the market, and low-carbon projects that are actively planned, operated and developed will become popular.

origin

Germany "Yating", one of the top ten brands in the world, is an advocate of low-carbon coatings.

The concept of "low carbon" comes from life. With the increase of carbon dioxide and global warming, the concept of low-carbon economy came into being, and new concepts such as low-carbon society and low-carbon city came into being. Facing the imminent threat, realizing low-carbon development has become the common task of all countries in the world, and Qixin's active efforts have become the common choice of people on earth.

The idea of "Yating" coatings in Germany is that low-carbon economy is the general trend and will become the third industrial revolution. Paint production enterprises should not only accelerate the elimination of backward production capacity with high energy consumption and high pollution, promote scientific and technological innovation of energy conservation and emission reduction, and reduce the use of petrochemical raw materials, but also guide the public to correct the habitual consumption patterns and lifestyles that waste energy and increase pollution with brand-new products, and give full play to the great potential of energy conservation and emission reduction in the consumption field of paint products.

Yating not only invested in a brand-new production line and improved the production process, but also used modern high-tech means such as "bioenergy" and "BPP bionic factor" to improve the environmental protection performance of products, which not only saved energy and reduced emissions in the production process, but also ensured stronger product functionality, lower VOC volatilization and less greenhouse gas emissions in all aspects of application, thus being more environmentally friendly.

represent

Ya ting di tan lacquer

Low energy consumption, low pollution and low emission, and build a brand-new production base.

In 2009, German "Yating" invested heavily to establish a brand-new production base in China, introduced the world-leading automatic production line, abandoned the traditional open production process and implemented closed production. The emission of gas and dust in the production process has been effectively reduced, reaching the world emission standard of green factories. In the production process, the world-leading equipment and technology are used to achieve fine control, and the generation and emission of carbon dioxide are 23% lower than that of ordinary paint products.

The state's policy of supporting the large-scale development of the western region requires enterprises in relatively developed areas to improve production efficiency and save labor to support the construction of the western region. "Yating" high-efficiency automatic production line has improved the control of production process and production technology, reduced the production labor force by 70% and saved valuable labor resources for the society.

Adhering to the tenet of "energy saving, economy and emission reduction", Yating adopted modern management methods, which not only basically realized paperless office, but also realized the integrated management of supply chain, logistics, capital flow, information flow and workflow, improved the work efficiency of each link, made production and business activities run more smoothly, accelerated the response speed of business processing activities, not only saved management costs, but also in the fierce market.

Making real low-carbon products with modern high technology

The "low-carbon coating" initiated by Germany "Yating" has increased its development efforts in product development, and adhered to the principles of low energy consumption, low pollution and low emission from the selection of raw materials, environmental protection of formulas, production control and inspection of finished products, thus raising the products to a new height.

The environmental protection of oily products of architectural coatings has always been a difficult problem for people in the industry. "Yating" adopts high technology such as "bioenergy" to ensure the naturalness and low volatility of products.

In oily products, resin is the main component, accounting for more than 90% of the product formula. "Yating" has changed the traditional practice of using petrochemical synthetic resin, using all natural "bioenergy" resin, and improved the environmental protection performance of the products.

Just as the United States enjoys subsidies for low-carbon products when producing ethanol from corn, the "bioenergy" resin produced by German "Yating Paint" from soybean oil and coconut oil is not a petrochemical product, but a low-carbon product, which is more environmentally friendly.

At the same time, Germany "Yating" improved the solid content of the product by adjusting the product formula, that is, in the formula, the components of volatile substances were reduced and the components of non-volatile substances were increased. The amount of degradable volatile substances in the improved product is reduced by half compared with before, thus achieving the purpose of low volatilization. Consumers in the use process, not only faster and more convenient, but also volatile VOC (short for volatile organic pollutants, such as styrene, propylene glycol, glycerol, phenol, toluene, ethylbenzene, xylene, formaldehyde and so on. ), less greenhouse gas emissions and more environmental protection.

Developed countries, such as Europe and America, are actively promoting the environmental protection housing project, and comprehensively utilizing the environmental protection technology of water-based paint to meet the intelligent requirements of future smart housing in terms of heat insulation, lighting, air purification and self-cleaning.

"Yating" water-based low-carbon wall paint products come from Germany. By using high-tech new materials, the products are more functional, with the characteristics of heat preservation, energy saving and carbon dioxide absorption.

According to the principle of bionics, the use of "BPP" in products can effectively absorb harmful gases such as carbon dioxide in the air, generate negative ions, improve indoor air quality and promote metabolism;

-Using nano-silver and other materials, the film can effectively kill harmful bacteria in the air and has better self-cleaning performance, saving a lot of manpower, material resources and financial resources for cleaning;

-adding nano-titanium hollow beads into the product to make the wall better insulated and more energy-saving;

According to the principle of human senses, high-tech brightening materials are used, which has high reflectivity and higher brightness of the wall after application, effectively saving lighting energy.

Carbon compensation, Yating's commitment to society

"Carbon compensation" means that individuals or organizations provide corresponding funds for carbon dioxide emission reduction to offset their own carbon dioxide emissions. With the increasing carbon dioxide emissions of households, enterprises and transportation systems, "carbon compensation" as a new method of independent emission reduction has attracted increasing attention.

"Yating" initiated the "carbon compensation" initiative within the enterprise for the first time, which not only stipulated that the employees of the company should compensate the carbon emissions of the factory by planting corresponding green trees, but also suggested that employees who choose private cars or planes to travel on business trips or vacations should calculate their "carbon footprints" and then plant corresponding green trees to compensate their carbon emissions, thus contributing to environmental protection.

The carbon compensation forest in Yating's new production base has begun to take shape, and a new small tree is growing. The "Yating" plan is to initiate initiatives in the industry, win the support of local governments by sponsoring saplings, building urban green belts and developing barren hills, and gradually establish more carbon compensation forests nationwide.

prospect

Increase investment by 5% and reduce carbon emissions by 40%.

Only "Yating" from Germany is systematically making low-carbon coatings. In fact, general paint manufacturers are involved in energy saving and economic benefits. But no more coating companies specialize in standardizing them. According to the "Yating" energy-saving standardized design process, the increased investment in equipment and technical transformation is about 5% of the total cost, but it can achieve 30%~40% emission reduction effect. This can improve the efficiency of enterprises, and more importantly, it has made outstanding contributions to society, mankind and the green earth home.