The date of the seat belt can be seen on the instruction manual. The left side of the common safety belt instructions is the quality and safety inspection mark; the middle is the manufacturer's trademark and name; the right side is the "Labor Safety Protection Equipment License" mark.

The production date of all parts on the car should be earlier than the production date of the car, otherwise it will be parts that will be replaced later. The production date of the car is usually written on the nameplate on the b-pillar or in the engine compartment. The information on the factory nameplate is printed once and cannot be modified again unless the entire nameplate is replaced.

Use seat belts correctly:

First, check the technical status of the seat belt frequently and replace it immediately if it is damaged.

Second, use it correctly. The seat belt should be fastened on the hips and chest as much as possible. It should be placed across the pelvis and chest to form a horizontal V shape. It can be used by one person. It is strictly prohibited to use it by two people. The seat belt must be twisted.

Third, when using the seat belt, do not let it press against hard and fragile objects, such as mobile phones, glasses, pens, etc. in your pocket.

Fourth, when there is no one on the seat, the seat belt should be returned to the retractor and the buckle tongue should be placed in the stowed position to prevent the buckle tongue from hitting other objects during emergency braking.

Fifth, do not let the seat back tilt too much, otherwise it will affect the use effect. The buckle of the seat belt must be fastened to prevent it from falling off when subjected to external force and failing to provide protection.