The standards for reflective stickers on trucks are:
1. Real reflective stickers must be posted, and fake and shoddy products cannot be posted. Real reflective stickers have manufacturing trademarks, 3C certification logos and product information. If there is no such information, it is a fake product, so be careful when purchasing reflective stickers.
2. The reflective stickers on the rear of the car must start and end with a white unit, and the intersection of the four corners of the rear of the car must be a white unit. The reflective stickers on the side of the car body can start with red units, but the location where the side of the car body and the rear of the car body meet must be white units.
3. Do not punch holes or slot in the reflective tape, nor damage the reflective tape.
4. Reflective stickers cannot affect the normal functions of the vehicle, such as the front and rear headlights, turn signals, etc.
5. The reflective stickers on the side of the car body can be disconnected, but the reflective stickers must account for more than 50% of the entire side length of the car body.
6. The length of each section of reflective tape must not be less than 300mm, and each section of reflective tape must contain at least one red unit and one white unit.
7. The distance between secondary body reflective stickers cannot be greater than 150mm.
8. The reflective stickers on the side of the three-wheeled vehicle body cannot be lower than 1.2 meters above the ground. If it is difficult to post them, additional baffles need to be installed.
Reflective logos to identify authenticity:
Reflective stickers are a must-have accessory for trucks. Although they look inconspicuous, they are very popular in the market because they are required by every vehicle. There are also a lot of fakes online.
Take the common 3M reflective stickers as an example. The most obvious difference between authenticity and authenticity is to judge by the information mark on the reflective stickers. Genuine 3M reflective stickers will be clearly marked with three types of information: manufacturer's logo, 3C certification logo, and product grade. If there is no information or incomplete information, it is definitely a fake.