as for your recommendation of a gas stove, I suggest you buy a beautiful JZ(2Y)-Q865 gas stove. This gas stove in my family has been used for half a year, and the fire cover has not been deformed, just like a new one. When cooking, the fire is quite big, the heating is relatively uniform, and the delicious food and nutrition are not lost. To tell the truth, since I changed this gas stove, my liquefied gas has been used for a long time. After consulting with them, I learned that this one uses an internal rotating parabolic fire + seconds ignition to start, which saves energy and is more worry-free; And the brand of Midea is good, I suggest you buy it. Gas stove refers to kitchen utensils that are heated by direct fire with liquefied petroleum gas, artificial gas, natural gas and other gas fuels. Gas stove is also called stove plate, and its popularity is well known, but it is difficult to see a common concept. Just like firewood stoves, kerosene stoves, briquette stoves and so on. According to the gas source, gas stoves are mainly divided into liquefied gas stoves, gas stoves and natural gas stoves. According to the focus, it can be divided into single focus, double focus and multi-eye focus. The selection of high-quality gas stoves should be considered from the following aspects: look at the quality of the gas stove: the appearance of the gas stove should be beautiful and generous, and there should be no collision in all parts of the gas stove. The surface painting of some gas stove products made of cast iron, steel plate and other materials should be even and flat, without foaming or falling off. The overall structure of the gas stove should be stable and reliable, the cooking surface of the gas stove should be smooth and flat without obvious warping, and the installation of parts should be firm and reliable without loosening. Pay attention to the thickness of steel plate on the surface of gas stove: some gas stove steel plates are thin and easy to deform and distort. Choose a safe and economical gas stove: choose a swirl fire and infrared gas stove, which can save gas with relatively high heating efficiency; In addition, the gas stove with flameout protection device is also very important. With flameout protection device, when the flame is extinguished by wind or water, the gas stove can automatically cut off the gas to ensure safety. It is best to choose pulse ignition gas stove as the ignition mode, which has high ignition rate. Identification of advantages and disadvantages of gas stoves: packaging and identification should be complete. The package should be marked with the name, address and model of the factory, and each cooker should have a certificate of approval and instructions for use. The side panel of the gas stove shall be provided with a nameplate, which shall indicate the name, model, applicable gas and pressure, heat flow and production date, etc. Proper heat flow. The greater the heat flow value of the household gas cooker, the stronger the heating capacity, which is usually called fierce fire. Generally, consumers are willing to choose fierce gas stoves. In fact, the heat flow should be adapted to the cooking methods and gas stoves. The gas stove and sink must be bought before the cabinet is installed, otherwise the embedded size cannot be reserved when installing the cabinet. If the cabinet manufacturer is unwilling to help install the stove and sink, it is necessary to install the stove manufacturer, sink manufacturer and cabinet manufacturer at the same time.