The method of removing the front wheel bearing is as follows:

1. Remove the tire. After removing the tire, you can see the car's brake disc and brake caliper. Only after removing them can you see the front wheel bearing; remove the bearing tightening nut. Use the opening to remove the dust cover outside the bearing, and you will see the large nut that fixes the bearing. Use a 30mm sleeve to remove the nut;

2. Remove the brake caliper. Use an 18-inch torx wrench to remove the two screws fixing the brake caliper, and slowly remove the brake caliper to prevent the brake oil pipe from breaking; remove the brake disc. Take off the brake disc outside. If the brake disc cannot be removed, you can use two screws to screw into the brake disc hole, tighten the screws with the corresponding wrench, and the brake disc can be removed;

3 , Remove the front wheel bearing. The solid nut on the outside of the bearing has been removed. At this time, the bearing can be removed by pulling it out with both hands;

4. Install the new bearing. Install the new bearing and replace it with a new strong nut. After tightening the nut, rivet the edge of the nut with an opening to make the nut stronger. Install the dust cover; install the brake disc and brake caliper. Install the brake disc, brake caliper, and replace the bearing this time.

First prepare a wrench. The first step is to remove the tire. After removing the tire, you can see the car's brake disc and brake caliper. Only after removing them can you see the front wheel bearing, and then remove the bearing tightening nut. Use the opening to remove the dust cover outside the bearing, and you will see the large nut that fixes the bearing. Use a 30mm sleeve to remove the nut. Next, remove the brake caliper. Use an 18mm Torx wrench to remove the fixed brake. Remove the two screws of the moving caliper and slowly remove the brake caliper to prevent the brake oil pipe from breaking. Then start to remove the brake disc. At this time, you can officially start to remove the front wheel bearing. Since the solid nut on the outside of the bearing has been removed, At this time, the bearing can be removed by pulling it out with both hands.

For this, you need to remove the front tire first, then take off the horns, and then use a press to press the bearing out, and then you can replace it. If you don’t want to replace it, it is recommended to go to the repairman. Just ask the shop owner to help you deal with it.