Hello, I am very happy to answer your question
It is best to use the corresponding genuine cigarettes as the comparison standard to identify true and false cigarette products. When identifying true and false cigarettes, you should start from the outside to the inside. Conduct a comprehensive analysis and comparison of the materials used in cigarettes, packaging, cigarette process characteristics, anti-counterfeiting features, smoking styles and other covers to draw conclusions. 1. On the packaging: The transparent paper used for real cigarettes has high transparency, bright and clean surface, and smooth hand feel. The fonts are gravure printed and clear. You can see the jagged fonts with a magnifying glass (similar to RMB printing). The color is pure and the trademark pattern matches the color registration. Fake cigarettes generally use transparent paper with poor quality, insufficient transparency and smoothness, and it is difficult to push by hand (thick and hard). It is also printed using ordinary printing, with blurred fonts and dull color. 2. Intrinsic quality: The cut tobacco of genuine cigarettes is orange-yellow in color, has an oily luster and is elastic. The cut tobacco is mixed with expanded stems, which has a good puffing effect and is in the form of very thin flakes, some of which are almost transparent. Fake cigarettes generally use low-temperature tobacco. The tobacco leaves are of high quality, yellow and dull in color, have poor elasticity, have no cut stems or have not been puffed, the cut stems are thicker, and some have even become moldy. 3. Genuine cigarettes have regular craftsmanship features (smooth and uniform width), while fake cigarettes do not have this feature and have obvious traces of handwork. 4. Generally, the transparent paper openings on the outer packaging of real cigarettes are in the same direction. If they are not consistent, it is basically judged to be fake cigarettes. Moreover, the filter tip of a pack of real cigarettes and the overlap of the cigarette are basically in half directions, that is, about half are square overlaps and about half are reverse square overlaps. This is the rule of machine rolling. If a pack of cigarettes The filter tip joint is in one direction, so it is basically concluded that it is a fake cigarette. 5. Each type of cigarette has specific anti-counterfeiting measures, such as laser holographic anti-counterfeiting, the use of color-changing ink, watermarks, colored fibers, gratings, coded telephone inquiries, special marks, etc. You can consult the manufacturer by phone or log on to the manufacturer's official website.
Hope it helps! ! !