Because when people walk, their shoes will rub against the floor to generate static electricity. The charged ions will attract dust in the air on the floor surface, which will have a certain impact on computer rooms, electronic factories and other units. In order to solve this problem, anti-static raised floors appeared. Next, Xiao Qi will introduce to you the advantages of anti-static raised floors and how to choose anti-static raised floors.

1. Classification of anti-static raised floors

Anti-static raised floors are generally divided according to different base materials and veneer materials. The base materials include steel base, aluminum base, composite base, particle board base (wood base), calcium sulfate base, etc. Veneer materials include anti-static ceramic tiles, melamine (HPL), PVC, etc. There are also anti-static plastic floors, OA network floors, etc. The following is a brief introduction to several types of flooring commonly used on the market.

1. Ceramic anti-static floor

It is made of anti-static ceramic tiles as the surface layer, composite all-steel floor or cement particle board, and is surrounded by conductive adhesive strips (without adhesive strips) Ceramic floors tend to shed porcelain when bumped). It has the advantages of stable anti-static performance, environmental protection, fire protection, high wear resistance, long life (service life of more than 30 years), high load-bearing (uniformly distributed load of more than 1200kg/square meter), waterproof, moisture-proof, and good decorative effect. It is suitable for various applications. Class computer room. The disadvantage is that the floor itself is relatively heavy (one floor is more than 15kg), which has a certain impact on the load-bearing of the floor; in addition, professional installers are required to install it, otherwise the installation will be uneven.

2. All-steel anti-static floor (non-standard type and national standard type)

Use highly wear-resistant melamine HPL fireproof board or PVC as the surface layer (due to the The climate is dry and it is not easy to use HPL fireproof board veneer), steel shell structure base material, and there are edgeless and edged ones depending on whether there is black tape.

The advantage of the all-steel floor is that it is easy to construct, there will be no gap problems after installation, and it is easy to replace. The disadvantage is that the surface material is not wear-resistant, has a short lifespan, and is prone to peeling and warping. To be replaced.

3. Aluminum alloy anti-static floor

The product is made of high-quality cast aluminum profiles, which are stretched and formed. The surface layer is high-wear-resistant PVC or HPL veneer, and is pasted with conductive adhesive. It is made of a base material that will never rust and can be used for many times, thereby effectively solving the product defects of composite flooring and all-steel flooring. However, the cost of tailor-made high-end anti-static flooring is too high.

2. Advantages of anti-static raised floor

1. Simplify installation and provide greater flexibility for future equipment configuration changes and expansions;

2. The equipment in the computer room can be freely connected electrically under the anti-static floor, which facilitates laying and maintenance, making the computer room clean and beautiful;

3. It can protect various cables, wires, data lines and The socket is protected from damage;

4. The computer room can use the space under the floor as a static pressure air reservoir for the air conditioner to obtain satisfactory airflow organization. No matter where the computer equipment is installed, you can get air from the air conditioner through the air vents of the anti-static raised floor;

5. It is conducive to the repair and maintenance of the bottom of the equipment;

6. Eliminate the harm to the human body caused by exposed cables;

7. The adjustability of the anti-static movable floor can be used to eliminate the unevenness of the ground and ensure the overall levelness of the computer room floor;

8. Can cause static charges to leak to the ground and reflect electromagnetic radiation.

3. Purchase of anti-static movable floor

1. Carrying capacity

Install the entire anti-static movable floor on the overlapping beams and adjust The load-bearing capacity of the flat adjustable bracket should be: uniform load gt; 1000Kg/_, a concentrated load of 400Kg at any part of the floor, and when it bears a load of 300Kg on a loading point with a diameter of 6cm, its deflection should be less than 2mm and No permanent deformation. The adjustable bracket of the raised floor should be able to withstand a vertical load of more than 1000Kg.

2. Wear resistance

The surface of the raised floor should be wear-resistant and should be used for a long time without scratches.

When the rubber casters of computers and other equipment slide on the floor, they should not leave any traces of friction or break.

After reading the introduction about anti-static raised floors brought to you by the editor above, I believe that everyone has a deeper understanding of anti-static raised floors. If you want to know more related knowledge, you can follow the decoration information channel of Rilong.com.