After curing, the texture is like ceramics, with strong viscosity and high hardness.
Resistant to most molds, durable anti-pollution, waterproof, scrub resistance and so on.
At present, there are three kinds of color cards, one is low-end, the other is high-end and the other is for tooling. The effect is very good and the curing time is very fast. Winter may be longer, because of the temperature, generally 48 hours is no problem. Beautiful sewing agent is an upgraded product of jointing agent, and its decorative practicability is obviously better than that of color caulking agent. It solves the problems of unsightly and dirty tiles.
The traditional sealant is coated on the surface of the sealant. The new caulking agent does not need caulking agent as the bottom layer, and can be directly added to the cracks of ceramic tiles after bonding. It is suitable for gap filling of more than 2mm, and the construction is more convenient than ordinary ones. It is an upgraded product of caulking agent.
Chinese name
Meifengji
application area
Gap filling above 2mm
material
High-tech new polymers and advanced pigments
form
Ceramic texture, semi-fluid liquid
colour
Rich in color, natural and delicate.
quick
navigate by water/air
Construction type, construction technology and product advantages
building implement
Glue gun, sponge, water scraper, sewing tool, water tray, basin, towel, etc.
Glue gun-glue tool, used to make beautiful sewing agent;
Sponge-three functions, close partner with water scraper, using leveling agent alone, similar to towel for cleaning;
Scraping agent;
Joint cleaning tool-wallpaper knife or special joint cleaning tool (flat-head cylindrical screwdriver) is used to clean the joint filler in the cracks of ceramic tiles;
Water basin-containing half a basin of water, used for wetting towels, cleaning sponges and water scrapers;
Towel-used for 7cm edges of tiles on both sides of the gap after wetting;
Gloves-waterproof after wearing, which can isolate beautiful sewing workers from touching their hands;
Building type
Fill completely
Full-fill construction: the gap of ceramic tile is empty, and there is nothing in it, so it is filled directly with caulking agent; Generally do 2-3 times sewing agent, or even more times; The cost will also double.
Half full
Semi-filling construction: ceramic tile gaps are filled with jointing agent; Clean the edge of ceramic tile with joint cleaning tool (for bonding sealant); Inject sealant once with a depth of about 0.8 mm.
work progress
1, horizontal first, then vertical: clean the cracks in the ceramic tile (tiled in wallpaper knife; The blade is parallel to the edge of the tile; The blade is almost parallel to the ground)
A groove of about 0.8mm; Both sides of the groove expose the edge of the tile; Ps: The intersection must be cleaned;
2. Clean the dust in the gap between tiles: clean with a vacuum cleaner or broom; To ensure that there is no moisture, dust and particles in the cracks of ceramic tiles;
3. Take out the sewing agent with the corresponding color: tear off the label on the butt, stick it on the sewing agent bottle, and open the pull ring. Let the adhesive stand on the ground, hold a nozzle of the adhesive in your left hand, put the tip down at the outlet of the adhesive, cover the left hand holding the nozzle with a wet towel, and pat several nozzles with your right hand to open the outlet of the adhesive. The purpose of covering with towel is to prevent the sewing agent from spraying from the discharge nozzle-there is pressure in the tank; Or directly poke the outlet of the sewing agent with sharp tools;
But pay attention to prevent the sealant from spraying on the wall, ceiling or body;
Screw the discharge nozzle to the discharge port of the sewing material; Mount a glue gun; Prepare for gluing;
Wet the tiles on both sides of the gap with a wet towel; But the gap between tiles must be clean and dry (this detail must be paid attention to! ! ! )
4, playing beautiful sewing agent: novices can play 20 cm-50 cm first, and can play a longer length after proficiency.
Then put the glue gun flat; The lower part of the discharge nozzle is clamped by the receiving plate;
5, leveling agent: (mainly using a scraper; Use a sponge; You can also use your fingers)
Ps: water scraper grip method; Four fingers are on it, the thumb is under the water scraper, and the excess material scraped by the water scraper is transferred to the sponge.
Continue steps 3, 4 and 5 until all horizontal lines are leveled; The surface of the sealant solidifies in about 20 minutes; I feel that all vertical lines can be made after the sealant is solidified;
6. Within half an hour: wipe off the residual sealant on the tiles on both sides of the gap with a wet towel;
After 7.24 hours; Normal use.
The above is the way to wipe the sealant clean after curing for half an hour;
There is another method on the Internet, which is to scrape off the sewing agent and clean it directly.
Mainly comprises the following steps:
1. Make preparations before construction, deal with the joints of ceramic tiles, and shovel the joints of ceramic tiles into a groove with a depth less than 2 mm with a small shovel, which is not only convenient for the application of joint sealant, but also can avoid excessive wear in the future if the joint sealant is stored in this groove.
2, and then use a small brush to clean up the dirt.
3. After the preparation is completed, you can open the sealant. First pierce the sealant with a small awl, and then install it on the glue gun. Because the method of installing glue gun is relatively simple, it can be played along the brick seam.
4, with a scraper brick seam, immediately scrape off the brick seam sealant.
5. The new sewing agent is quick-drying. When it is10cm, it needs to be cleaned with a wet sponge, otherwise it will be difficult to clean it.
6. The surface is completely solidified after two hours of construction, and the construction surface can be used normally within 24 hours.