Subject 2 is pile inversion, C 1 subject 2 skills 1. Key points of unilateral bridge: 1. Before crossing the left bridge, the left hood line and the center line of the left bridge are on the same straight line; 2. After crossing the bridge, try to slow down (step on the foot brake); 3. The left rear wheel just got off, and the direction immediately turned to the right; 4. When the left hood line meets the left edge of the right shaft, the direction immediately turns left twice; 5. When the right front wheel is on the bridge, the direction immediately turns right; Then trim the direction slightly until the front of the car is straight (if the front of the car is straight, there is no need to trim the direction). Second, the main points of side parking: 1. Slow parallel along the parking space, stop when 1 pole appears in the rear window of the car; 2. Hang the reverse gear, press the horn once, hit the left turn signal, and prepare to reverse the car in place; 3. When reversing, when the center of the right rear window triangle is parallel to 1, turn right to 1 half a turn and look at the left rearview mirror immediately; 4. After the left rearview mirror appears with the No.4 lever, turn left to the end and then look at the front of the car; 5. Both sides of the front of the car are located between 1 and No.2 pole, and stop (the direction need not be reversed, so keep the position when stopping); 6. Step on the clutch, shift to 1, turn on the right turn signal and press the horn once to get ready to leave the parking space; 7. The car drives on the left. When the small rearview mirror on the right hood reaches 1 pole, turn right three times and drive out of the parking space; 8. At the right time, turn left 1 circle and move on. 3. Uphill parking and starting point: 1. Immediately turn on the right turn signal and tilt to the right side of the site after hearing the instruction of "uphill fixed-point parking"; 2. When you are about to reach the roadside, turn left less than half a turn, and then turn right quickly, so that the right side of the car is parallel to the roadside, and the distance is within 50CM (subject to the white line at the front parking point, do not cross the white line); 3. Step on the clutch and slowly approach the parking spot. When the right hood rearview mirror reaches the parking sign, step on the foot brake, stop, pull the hand brake (until you hear 2 rings) and turn off the turn signal; 4. Before starting, put 1 gear, turn on the left turn signal and honk the horn; 5. Slowly lift the clutch, and the hand brake handle is ready to start at any time; When the car body has a shaking feeling or a gear running-in sound, release the brake and the car will move forward; Some coaches here will use the technology of slowly lifting the clutch and stepping on the accelerator to start, and the result of the road test is the same. Fourth, the main points of S-bend: In principle, try to make a big circle after entering the bend; When cornering, the small rearview mirror on the inner cover is always at the edge of the outer white line through the steering wheel (specifically, it can't go out of bounds or be too far from the edge line), and it will return to the positive direction at the end of the S-bend. 5. Key points of right-angle turning: Before entering the right angle, let the car slowly move forward on both sides of the road as far away from the turning point sign pole as possible; When the center of the small triangular window on the front window near the turning point coincides with the turning point, hit the turning point to the end point and return to the positive direction when passing the rear car. Sixth, the main points of the undulating road: this is the simplest. Before crossing the uneven road, put on the brakes and try to pass at the slowest speed. Seven, the main points of the round cake road: 1, adjust the direction before passing the cake, let the car pass through the cake of 1 and 2 (specifically, feel the round cake in the middle position on both sides of the hood line); 2. The rear wheel of the car has just passed 2 cakes; When the lower left corner of the window is aligned with the center points of the three cakes, the direction is 2 laps to the left and the front of the car faces the three cakes; When the small rearview mirror on the right hood head is about to reach the right side of four cakes, the direction will return to the right (height 175CM or more can return to the right direction after passing through the right side of four cakes); 3. When the lower right corner of the window is aligned with the center point of 4 cakes, the direction is right to the end, and the front of the car is facing 4 cakes; When the lower left corner of the window is aligned with the center points of the five cakes, the direction will return to the left; 4. When the rearview mirror on the left side of the window is aimed at the center point of five cakes, the direction is left to the end, and the front of the car is driven to five cakes; When the small rearview mirror on the right hood head is about to reach the right side of six cakes, the direction will return to the right (height 175CM or more can return to the right direction through the right side of six cakes); 5. When the lower right corner of the window is about to pass the center point of 6 cakes, turn to the right and drive to 6 cakes; The front of the car just passed six cakes and the direction returned to the left. Eight, the main points of width-limited door: pass at two speeds. When the front of the car passes 1 door, turn left in the direction of 1/4; When crossing the second door, turn right for half a turn; When you go through the third door, turn left half a turn. During the whole process, be careful not to let the window rearview mirror touch the sign post. Nine, 100 meters addition and subtraction: the main results are proficient. For beginners, it is more difficult. The actual road test items can be added to the fifth gear continuously, and the examiner will let the roadside park at a fixed point. Point 1. Walk along the front of the car to the driver's door. When you get on the bus after reporting for duty, first submit your student ID card with both hands, then adjust your seat, fasten your seat belt, step on the clutch, step on the accelerator and look at the dashboard at the same time. Then report that the instrument is normal. After hearing the examiner's start instruction, prepare for progress; 2. Step on the clutch, shift to 1, press the horn, turn on the left turn signal, and release the brake (pay attention to the flat ground or slope when starting, usually on the flat ground); Slowly lift the clutch and the car starts; 3. After the refueling door is put into the second gear, pay attention to slowly lift the clutch (if it is fast, it is easy to shake or turn off the fire), and put the refueling door into the third gear; 4th and 5th gears; 4. When the examiner gives the roadside parking instruction, quickly step on the brake to slow down (don't step on it to the end, but slow down quickly, preferably within 20 kilometers, otherwise it will be difficult to move behind), turn on the right turn signal, lean on the roadside, turn left half a turn when approaching the roadside (don't fall on the land next to it), and then turn right quickly; When you slowly move to the designated parking spot, step on the foot brake to stop, hold the hand brake, put it in neutral, release the clutch, step on the foot brake, turn off the turn signal and report "Operation finished". After signing, put down your seat belt, get off and close the door. Over. 5. In the process of driving, if the distance from the preceding vehicle is shortened, you should slow down, and at the same time cooperate with downshifting as appropriate to stabilize the clutch; When turning, slow down, downshift, turn signal, pass the second gear, and accelerate after turning; When turning, put your feet above the clutch and foot brake and be ready to stop at any time. Respondents' test skills of filling piles 1. Know the venue: the front is facing the garage, and the back is the 1 line. The left garage is called garage A, the right garage is called garage B, the left parking position is called point A, and the right parking position is called point B. Heap test skills, 2. Test procedures: first, go backwards from point A, enter the bottom of garage B, drive into a garage after two entrances, then start from garage A, go out from the door of garage B to point B, then pour into a garage (the front of the car can enter) and drive out to point A. In the whole process, as long as you don't touch the pole and cross the line, it is qualified. Pile testing skills, 3, straight-line reversing method: the front of the car must reach the middle position of the left and right width of the car (it must reach the middle position, otherwise you just aim at the back and the car is not in the middle of the garage. This is very important for whether you can back the car to the middle of the garage door), turn to the rear (you can't turn your head 180 degrees, turn your body 90 degrees first, that is, turn your head 90 degrees with your back to the door, so that your neck won't be laborious), aim at the middle of the garage door with the middle of the tail, and then aim at the bottom of the garage door immediately after the tail enters the garage door. Otherwise, it is either touching the pole or crossing the line, and the method of adjusting the direction is the same as when moving forward. Car c 1 driver subject 1. Subject 2. Subject three. Pavement (whole process) (2009-05- 13 08:54:59) Reprinted label: Miscellaneous Talk 1. Subject 1 (liberal arts) computer test: mainly through the basic knowledge of traffic regulations, traffic safety and motor vehicle driving. It is easy to pass the written test with a score above 0.90. Note: If you have a CD-ROM of computer teaching materials to study on the computer, it will be easier to pass. After the simulation test 10 can exceed 95 times on the computer, once it passes the test, there is no problem. 2. Subject 2 (moving the library backwards)

First, pour into garage B from the parking space (starting point) on the right.

1. Check whether the vehicle is parked in the correct position, whether the wheels are upright and whether the steering wheel mark is upward.

2. When the No.6 lever and theNo. 1 lever are in a straight line, the steering wheel is killed to the right.

3. When the 5th gear lever (front center lever) is exposed on the right side of the rear windshield, turn the steering wheel to the left 1 turn.

4. When the front center lever is exposed on the right rear triangle window, turn the steering wheel to the right again.

5. Looking back at the left rearview mirror, when the 1 lever (left rear lever) appears, the steering wheel quickly turns left for two turns, with the red dot facing up.

6. Stick your head out to see the left line, and pay attention to keeping the car body parallel to the sideline.

7. When the car arrives at two-thirds of the warehouse, look back and forth at the bottom of the middle bar ahead, and stop immediately when the ground road comes out about 20 cm.

(Steering wheel action: kill to the right → turn back 1 → kill → turn back 2).

2. Move from library B to library A (2 in and 2 out)

1. Forward and backward, you can kill the steering wheel to the right first.

2. Once inside, after the left corner of the hood is aimed at the middle lever, look back at the sideline (kill to the left). When the car body is about to be parallel to the sideline, the steering wheel returns to the right for 2 laps.

3. After retreating, after the right corner of the hood is aimed at the middle pole, look at the return direction of the sideline (kill to the left), when the body and

When the edge lines are about to be parallel, turn the steering wheel right twice.

4. Binary, when the center of the hood is about to be aligned with the right lever, look at the sideline back to the direction (kill to the left), when

When the car body is about to be parallel to the sideline, turn the steering wheel back to the right twice.

5. Step 2: Look at the rear windshield through the inside rearview mirror. When the rear center bar moves to the left of the rear windshield, it will quickly return to the direction (kill to the left), stick its head out to look at the center line, and then stop once the car enters the garage. In fact, if the car is parked straight, it is ok to stop at once. The main reason for the U-turn was that the front wheel was skewed and was knocked out by infrared rays.

Third, from the library to the parking space on the left.

1. After the car leaves garage B, when the left front corner of the hood presses the boundary line by one foot, the steering wheel is killed to the left.

2.2. When the right corner of the hood is aligned with the boundary line (or column), the steering wheel rotates twice, and then the brake stops. Stick your head out to see the front wheel and check whether the car body is parked. If there is any deviation, correct it in time when reversing.

4. Enter the library from the parking spot on the left.

1. When the No.3 and No.4 poles are aligned 50 cm in front of the straight line, the steering wheel is killed to the left.

2. When the front middle lever overlaps with the lower part of the rear gear and the window angle is small, turn the steering wheel to the right for 1 and 1/4 turns.

3. When the front middle lever overlaps with the lower part of the front gear of the small window angle, kill the steering wheel to the left again.

4. Look at the right rearview mirror. When the No.3 pole (right rear pole) appears, it will turn back twice, with the red dot facing up.

Put your head out to look at the center line, and the car will stop immediately after entering the garage.

(Steering wheel action: kill to the left-→ return to 1 and 1/4 laps-→ kill-→ return to 2 laps) Santana inverted pile video:/s/blog _ 5c5105430100dup5.html)-Car C. Cdlc2.asp4. Exam-side parking latest crack Author: Driving School Yitong/Editor-in-Chief Source: Last modified on: 2006-12-2517: 37: 00 Click to start printing.

Cracking method: The right side of the car is 30cm away from No.3 and 1, stop when the rear window sees 1, turn on the left turn signal when the car arrives, and turn right to 1 when the rear window doesn't see 1. Look at the left rearview mirror and see the No.4 pole turn left 1. Half way. Look at the front right rearview mirror and see No.4, pay attention to the situation behind the road, and use the semi-linkage dead angle sideline to move in the turning direction. Learning to drive while parking video:/cdlc5.asp5. Exam-The latest crack of the pancake road Author: Driving School Yi Tongtong/Editor-in-Chief Source: Last modified on: 2006-12-2517: 3100 Click to start printing. The page address is: /info/58.htm Examination requirements: Six convex round cakes are staggered on the road, and vehicles must pass through six round cakes continuously; Vehicles can neither press on the round cake nor rub it; The wheels shall not exceed or press on the edge lines on both sides of the road. (2) Scoring standard: 20 points will be deducted when the wheel presses the round cake; Deduct 20 points for not driving according to the prescribed route; Deduct 20 points for failure to stop halfway; 20 points will be deducted if you turn off the engine. (3) Driving skills: First, master the steering wheel skillfully. The second is to drive in first gear, without refueling the door during the process. The third is to persist as much as possible. When passing the right round cake, the left wheel should drive as close as possible to the left side of the right round cake, and vice versa. The fourth is to borrow reference objects. When passing through the left round cake, once you see that the left corner tip of the front of the car is aligned with the lower end of the vertical diameter line of the left round cake, you will immediately drive to the left, and when the front of the car is straight, you will quickly return to the direction. After straightening, continue to drive to the round cake on the right in the same way. (4) Difficulty coefficient: ★★★★★★★ Disc Road Driving Video:/cdlc6.asp6. Examination-the latest solution to the 100-meter shift. Author: driving school Bitcom/ editor source: last modified: 2006-12-2417: 39: 00 click to start printing. The page address is the cracking method: the throttle, clutch and gear are fast and accurate. When you reach the fifth gear, pull it out immediately and subtract the fourth gear. When decelerating to the third gear, stop when braking and decelerating to the second gear. 7. Exam-The latest solution for cornering driving Author: One-stop driving school/Editor-in-Chief Source: Last modified on: 2006-12-2517: 35: 00 Click to start printing. The page address is: /info/6 1.htm Driving in a corner (1) Examination requirements: Driving from one end of a corner. Don't crush the road edge line when driving.

(2) Scoring standard: 20 points will be deducted for rolling kerbs; Deduct 20 points for failing to stop halfway; Deduct 20 points for flameout.

(3) Driving skills: The examination room is actually an "S"-shaped road, but the width of the road is only 3-5 meters. First, you must keep driving in first gear all the way, and you can't rush in the direction. Second, when driving to the right corner, the right wheel sticks to its right curb, and vice versa.

(IV) Difficulty coefficient: ★★★★ Learning to drive in a corner video:/cdlc3.asp8. Exam-The latest crack of speed limit passing through the width-limiting door Author: Driving school one-stop/editor-in-chief Source: Last modified on: 2006-12-2517: 40: 00 Click to start printing. The page address is:

(2) Scoring standard: 20 points will be deducted for hitting the pole; Deduct 20 points for not driving according to the prescribed route; Failure; Failure below speed 10 km; 20 points will be deducted for turning off the engine.

(3) Driving skills: The key is at the second door. After the car body passes through the first door, hit the direction again. Once the right corner of the front of the car is aligned with the right pull rod of the second door, the car body will straighten immediately and just pass through the second door. In addition, try not to brake, otherwise the speed may be lower than 10 km, and you will be judged to fail.

(4) Difficulty coefficient: ★★★★ The speed limit is too wide. Learn driving video:/cdlc7.asp4. Subject three. It is important to adjust your mentality, be calm and not nervous, and think about the steps step by step before getting on the bus. 1. Walk from the right rear of the car along the right side of the car to the left front of the car, and slide the door into the car. When the door is 20 cm from the closed position, close the door. 2. Report to the examiner: "Hello examiner". Then give the ID card to the examiner for verification. Foreign candidates should submit their temporary residence permits and ID cards to examiners for verification. 3. When the examiner checks. Adjust the seat and rearview mirror, and then fasten the seat belt. Don't forget to fasten your seat belt. The examiner said "Go" within 30 seconds. If the examiner doesn't say "start" within 30 seconds, report to the examiner after everything is ready: "Ready, request the exam". 4. Turn on the left light, look at the left mirror, step on the clutch, put on the first gear, and put the car after the examiner approves it. If there is a car behind, you can go straight for a while and then merge. If there is no car, turn left and go straight. 5. Add gears according to the road conditions. Generally, the third to fourth gear is enough. If the road conditions are ideal, you can add it to the fifth gear, but remember, you must control the speed and don't exceed 50. Villages, schools, crosswalks and bus stops must slow down! If it's third gear, just release the throttle. If it's fourth or fifth gear, just tap on the brakes. Moreover, just remember to look at the left and right rearview mirrors every 20 seconds, or you will be deducted 10 if you are not strict. 6. Remember to pull the handbrake first and then return to neutral when parking at the red light. Observe the left and right road conditions when crossing the intersection. 7. Turning around is more critical. Remember to turn on the left light when you look at the turn sign. The rule is/kloc-turn on the light within the range of 0/00 meters to 50 meters, sooner rather than later. Just before the U-turn crosswalk, slow down and downshift to 1, pay attention to the left mirror to observe the rear car condition, pay attention to the opposite car condition, and be careful not to grab the line. If the driveway is narrow, you can fight from the right and then kill from the left, so you won't hit the curb. Turn around and stand up straight. Don't pull over in a hurry Be sure to listen to the examiner's orders before pulling over. After hearing the command, turn on the right light and look at the right rearview mirror. Be sure to shake your head obviously, otherwise you will be mistaken for not looking in the rearview mirror and go straight over. Then turn right and adjust the parking space. Don't stop in a hurry. Don't worry about not finding a good position. Generally, your position is a little to the right in the middle of the whole lane, and 30CM is enough. 8. Remember, if the light is still flashing after the car stops, be sure to turn the light back, first put on the brake and then go to neutral. Usually you have finished at this point, but some examiners will test you and let you pass. Don't worry at this time. After the seat belt is removed, look at the left rearview mirror to observe the car condition behind and then push the door and get off. This is very important. When I took the exam, one of my classmates just didn't pay attention and was shot! What a pity! ! ! Note: Generally, the examiner will gather everyone together before the exam to talk about the matters needing attention in the exam. Everyone should listen carefully. Generally, you don't need to step on the accelerator to blow dry before getting off the bus, and you don't need to turn on and off the fire when getting on and off the bus. If you can basically do this, you will be able to pass the customs smoothly.