Insert the key into the front lock and turn left directly. Generally, when opening the cushion, insert the key into the electric door lock. Don't press it down, just twist it to the left with a little force. When you hear a noise in the seat, it will open and press down to lock the front. Now more and more new scooters adopt this new lock. Close the cover directly, and then reset the lock with the key.

Due to the structural design of the scooter, there is often an iron frame for one person at the back, which is the installation position of the tail box. Some people don't like to remove the trunk, but most people will install the trunk because it will help to put more things, such as helmets. This object is more troublesome to carry, and it needs to follow the car frequently. It is more convenient to have a trunk at the back.

Extended data:

Maintenance method of scooter;

1, change the oil on time. The oil change frequency is 800- 1500km/ time, or once a year, whichever comes first.

2. Clean the air filter regularly. Because the air intake of scooters is generally low, the dust on the road is easily inhaled. The fine sand particles in these dusts are good abrasives, harder than steel, and easy to damage the piston and cylinder, so it is very important to clean and replace the empty filter element regularly, generally every 2000km/ time.

If high-pressure air is used for cleaning, it must be blown out from the air filter, not from the outside to the inside. In addition, it should be noted that the air filter of the scooter must be installed tightly and cannot leak. Some cars don't run at high speed, which is caused by air leakage from air filter. There are many reasons.