Current location - Trademark Inquiry Complete Network - Trademark registration - How to remove the trademark sticker of plastic basin
How to remove the trademark sticker of plastic basin
Water it first, then scrape it off with a small blade.

Sticker removal trick!

Friends who drive have been exposed to stickers, such as many small ornaments in the car, transparent tape for wedding floats, and certificates of some accessories. When these things are dismantled, they often leave hard-to-remove sticker marks in the car or on the surface of the car body, which cannot be removed or scraped off with hard objects. What should we do?

In practice, the following two methods are found to be good: alcohol removal method. Dip a soft cloth with 95% alcohol, and then gently wipe the adhesive, the adhesive will become soft and easy to fall off, and alcohol will generally not damage the surface of plastic parts or car paint. But sometimes it is found that alcohol is not very effective for some stickers. This can be achieved by dipping a soft cloth in a little gasoline and gently wiping the sticker. At this time, it should be noted that gasoline has a "dissolving" effect on a certain plastic or paint, so it must be used carefully: either gently wipe it in an unimportant place first and use it if there is no problem; But be careful not to use too much gasoline, as short as possible! I tried to wipe the car body surface with gasoline for a short time, but it had no obvious effect on the paint film on the car body surface. In this way, the adhesive can be easily removed. ...

Buy a bottle of glue remover. As long as it is in 20 yuan, it can be used in many places. Can be used for a long time.

Is there any way to remove the tape stains on the gate?

Stick some decorations on the door with super adhesive paper, and then take them off, leaving pieces of sticky marks on the door. You can use gasoline or kerosene to wipe off the adhesive tape, or you can buy 1200 water sandpaper to wipe off the spots, and then buy a can of transparent varnish and dilute it with banana oil, so that the brightness can be restored after one brush. Don't brush nail polish. Although glue stains can be removed, it is a pity that the door will turn white.

Tape: first scrape off the tape with a knife, and then wipe it with petroleum essence; Scrape off the adhesive tape with frosted glass and wipe it with turpentine.

Trademark law for removing stickers

There are always some labels on newly bought stainless steel pot or glassware. After the label is torn off, it is difficult to remove the traces left by the adhesive. Wiping with a wet cloth or scraping with a knife often leaves traces. After many times of practice, I summed up some tips to share with you.

For the self-adhesive marks on the surface of hard objects, we can apply grease-free nail polish remover on the surface of the object, and then gently wipe it with a soft cloth; These traces can also be removed with industrial alcohol or gasoline. If these stickers stick to your skin, you can also remove them with lemon juice.

In addition, hand cream can also achieve the effect of removing adhesive. Hand cream contains a lot of water (generally above 70%) and a certain amount of surfactant. Surfactant has good wetting, penetrating and dissolving ability, and can quickly penetrate between the adhesive and the surface of the object, thus achieving the purpose of cleaning. You can also find some similar products, such as face cream, facial cleanser and detergent, which have the same effect.

For the stubborn adhesive on the carpet, the best way is to carefully trim the adhesive traces on the top of the carpet fluff.