The sticky offset printing after the trademark is torn off can be removed with nail polish remover, hair dryer, wind oil, oil-based detergent, or hand cream.

1. Use nail polish remover to remove it

If you have nail polish remover at home, you can apply the nail polish remover evenly to the sticky area and let it sit for a while. If a reaction occurs, wipe it back and forth with a dry cloth or scouring pad to remove the sticky offset.

2. Use a hair dryer to remove the offset printing

You can also use a hair dryer to remove the offset printing. The method is relatively simple. Turn on the hair dryer, turn on the hot air shield, and blow it back and forth against the offset printing for a period of time. The offset printing can be removed by melting it away and wiping it vigorously with a cloth.

3. Use Fengyoujing to remove it

Apply Fengyoujing evenly to the sticky areas of the trademark, let it sit for a period of time, and wipe it back and forth with a cloth several times. It can remove offset printing without damaging the product, making it look smooth and new.

4. Remove with oil-based detergent

Apply cooking oil or olive oil to the surface of the adhesive, let it sit for a period of time, and then wipe it with a clean cloth. Apply alcohol or white vinegar to the surface of the adhesive, let it sit for a while, and then wipe it with a clean cloth. Apply a small piece of toothpaste to the surface of the adhesive and wipe it with a clean cloth.

5. Remove with hand cream

Apply an appropriate amount of hand cream on the tape that needs to be removed. Within half a minute, keep rubbing your fingers on the surface of the tape. After half a minute has elapsed, gently peel off the tape and remove the slight traces of glue remaining on it.