1. Preparation: It is necessary to make preparations before using Lingyun paste box quality inspection machine. First check that the power supply of Lingyun paste box quality inspection machine is connected normally, then put the product on the inspection table of the quality inspection machine and adjust the position to ensure that the product will not slide or shake. Then, turn on the power switch of the quality inspection machine and wait for the equipment to start.
2. Setting detection parameters: Lingyun paste box quality inspection machine needs to set detection parameters according to different product types and quality standards. Operators need to make corresponding settings on the operation panel of the quality inspection machine according to product requirements, such as product size, appearance defects, electrical performance and other parameters. After setting the parameters, save the parameters in the memory of the quality inspection machine for direct call next time.
3. Start inspection: After setting the inspection parameters, click the "Start Inspection" button on the operation panel of the quality inspection machine, and the quality inspection machine will automatically inspect the products. Operators need to wait patiently for the inspection machine to complete the inspection process and observe the inspection results on the display screen of the inspection machine.
4. Analysis of test results: Lingyun paste box quality inspection machine will automatically display the test results on the equipment display screen after completing the test. Operators need to carefully analyze the test results, and there are product quality problems, which need to be recorded and handled in time. At the same time, the operator also needs to adjust the production process and quality control measures according to the test results of the quality inspection machine to improve the quality and reliability of the products.
5. Turn off the quality inspection machine: After using the Lingyun paste box quality inspection machine, you need to turn off the equipment. First, remove the product from the test platform of the quality inspection machine, and then turn off the power switch of the quality inspection machine. Finally, the equipment is cleaned and maintained to ensure the normal operation and long life of the quality inspection machine.